Fiberflex 30D Filamento 1.75mm 0.85kg Light green color verde claro

T8 R2 50cm Spindle Kit with Bearing Support, Nut and Coupler features:

- With bearing bracket, nut, coupler for CNC 3D Printer
- T8 spindle
- Type: Trapezoidal screw
* Diameter: 8mm
* Tooth distance: 2mm * Lengths: 500 mm
- Coupler 5mm / 8mm
* Material: Aluminum alloy

Premium Bobina para Impresora 3D

Bowden connector - a pneumatic connector with a 9.7mm screw and 1.75 cm length for the 6mm tube of 3D printer couplers for 1.75mm filament. 

Flexible Coupler 5mm/8mm Z-axis CNC 3D Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to an 8 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 8mm

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features:
- Based on the PCF8574A chip
- Power: 5V
- Supports I2C Protocol
- A potentiometer for regulate contrast
- Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL
- Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32

One of the most popular stepper motors with 200 steps per revolution and a maximum load of 12.8 kg/cm. It comes with a 30 cm cable. We have the best stepper motors at the best prices!