Fibersilk Metallic Filamento 1.75mm 0.85kg Blue color azul
  • Fibersilk Metallic Filamento 1.75mm 0.85kg Blue color azul
  • Fibersilk Metallic Filamento 1.75mm 0.85kg Blue color azul
  • Fibersilk Metallic Filamento 1.75mm 0.85kg Blue color azul

Fibersilk Metallic Filamento 1.75mm 0.85kg Blue color azul

I0472

Premium Bobina para Impresora 3D

Fiberlogy
Add to wish list

El filamento METÃLICO FIBERSILK proporciona un efecto de profundidad único del modelo 3D. Las impresiones creadas con él se caracterizan por un intenso brillo metálico. La riqueza de colores, el brillo profundo, la alta durabilidad y la facilidad de impresión lo convierten en uno de los filamentos favoritos de todos los entusiastas de la impresión 3D. Este filamento se recomienda para la producción de diversos elementos decorativos, como jarrones, figuras, accesorios de cosplay, etc.

Propiedades del filamento Fiberlogy Filamentos metálicos:
- acabado metálico brillante con efecto de profundidad de color.
- buena adhesión y baja visibilidad de los límites de la capa.
- alta resistencia y resistencia al impacto
- fácil de imprimir

-viene en muchas variantes de color

Variantes de color

Parámetros de impresión de filamentos sugeridos:

Temperatura de extrusión

210°C - 230°C

Temperatura de cama caliente

50-70°C

Debido a las diferencias de diseño de las impresoras, los datos anteriores deben tratarse como pautas y los valores apropiados deben determinarse experimentalmente.

Parámetros de filamentos:

Material biopolímero
Diámetro del filamento 1.75mm
Tolerancia ovalada +/-0.01mm
Tolerancia de diámetro +/-0.02mm
Superficie material brillo
Contracción del material muy bajo
Peso del producto 0.85 kg neto, bruto
Dimensiones de embalaje ~ 205 x 205 x 80 mm
Caja de cartón con estampado Envasado al vacío

Data sheet

Color
azul
Diametro [mm]
1.75
Material
(Fibersilk
Peso [g]
850

Customers who bought this product also bought

Electronic Antistatic Wrist Bracelet ESD Blue

Electronic Antistatic Wrist Bracelet ESD Blue features:
- Electronic Antistatic Bracelet, blue color
- Protection against electrostatic charges
- Adjustable bracelet with crocodile clip connector
- Material: The conductive elastic band is made of nylon and woven in stainless steel
- Extensible length up to 180 centimeters
- Weight: 25 gr.
- Quantity: 1 loose unit in plastic bag

H0142

Price €1.53

ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

W0014

Price €4.09

High Power LED Chip Diode 10W Blue SMD COB

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light - Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little thermal silicone in each of the placement centers of the diodes
- The thermal paste increases the thermal transfer between the diode and the metal plate used as circuit

P0033

Price €2.34

IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface

IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features:
- Based on the PCF8574A chip
- Power: 5V
- Supports I2C Protocol
- A potentiometer for regulate contrast
- Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL
- Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32

P0008

Price €1.15

Micro:bit BBC v2 - WiFi Single Board Micro-Computer, BLE 5.0, OBSOLETE

This version has been withdrawn from sale. Select model 

BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer (solectroshop.com)

The novelty of micro:Bit for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. 

B0111

Related articles on blog

No related article on blog

€23.06
Save 20% €18.45

18,45 tax excl.

1
Last item
Regular price €23.06 Price €18.45

Order until 4pm we will send today
30 days return