Tools

Thermo Silicone Paste Cleaner features:
This product is safe and easy to use with a pleasant aroma of citrus.
It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned
- Wait 1-2 minutes
- Clean with a cloth

Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.
It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features:
- Excellent dielectric properties
- It is used in different industrial processes as a lubricant (due to its greasy consistency)
- Particularly suitable for lubricating plastic and rubber parts
- Ideal as an insulating coating that does not harden
- High quality - Made in EU

Characteristic:
-Metric thread M3
-Male-Female separator 25mm
-Quantity: 5 units

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).
- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales.

120x M3 Nylon Separator features:
- Hexagonal M3 made of nylon for screws and fastenings on PCB boards, model aircraft, DIY projects
- Can be used in prototyping and robotics projects
- Box dimension: 128x 66x 24mm
- Quantity: 120 units
- Color: white

Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)
- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)
-the keyboard and the LCD screen

Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features:
Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.
It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks.

Graphite Grease Spray Anticorrosive 100ml features:
Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: - Car leaf springs
- Worm gear
- Change gear train
- Screw thread
- Screwbolt which are exposed to corrosion
- Chains and other hardly burden nodes of friction working in a temperature range from -20°C to 50°C

Protoboard Breadboard 5x7cm features:
-PCB dimension: 5x7cm
-Hole diameter: 1mm
-Pitch: 2.54mm
-Bakelite with copper fields

Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.
It is necessary for the correct operation of any type of temperature sensors.

Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K

Protoboard Breadboard 9x15cm features:
-PCB dimension: 9x15cm
-Hole diameter: 1mm
-Pitch: 2.54mm
-Bakelite with copper fields

Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls)

TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 26x26x0,3mm

Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 41.5x28.2x0.3mm

Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass.
- Dimensions: 23x18x0,3mm

M4 made of nylon for screws and fasteners on PCB boards, model airplanes, DIY projects.
You can use in prototyping and robotics projects.
25x M4x5 Nylon Round Separator Polyamide Insulators PCB features:

- Material PA66
- Type: female / female
- Inner diameter M4
- Body length: 5mm
- Quantity: 25 units
- Color: white

Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out. Easy to dissolve. It acts very regular with guarantee of contour sharpness. 

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 011 features:
- Mixing ratio: 100: 8,
- Density: 0.97g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.

Double Side Prototype PCB Board 5x7cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 019 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100:6,
- Density: 1.2g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 45000 cP,

Double Side Prototype Board PCB 8x12cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 021 features:
- Manufacturer: TermoPasty,
Mixing ratio: 100: 10,
Thermal conductivity: 1.2 W / mK,
Density: 1.12g / cm3,
Pre-crosslinking: 30-40 min,
Working temperature from -50ºC to + 200ºC,

2 Double Side Prototype PCB Board 6x8cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.
The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.
After curing, it is very soft.
Creates an excellent electrical insulation.
It has a wide range of temperatures, from -55 ° C to 200 ° C.
Silicone compound 031 Double-component gel features:
- Mixing ratio: 3: 2,
- Density: 0.98g / cm3,
- Pre-crosslinking: 50-60 min,
- Working temperature from -50ºC to + 180ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.
Mode of use:
- Clean, degrease and dry the system.

Double Side Prototype Copper PCB Board 2x8cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 029 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100: 10,
- Thermal conductivity: 2 W / mK,
- Density: 1.15g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,

It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Prototype Board Transparent 400 points features:
- Linkable with other plates
- Base with adhesive
- 400 contacts without welding (300 contacts for components and 100 contacts for power rails )
- Transparent ABS
- Measurements 82x 55x 8 mm

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK.

Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.
A special brush facilitates the application of the paste.
Diamond powder content: 10%
AG Extreme thermal grease 4g flask features:
- Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,
- Thermal impedance: <0.065 ° C in2 / W
- Specific gravity:> 2.4g / cm3,
- Evaporation: <0.001%,
- Fluency: <0.001%,
- Electrical conductivity: insulation,
- Viscosity: 1000 cP,
- Working temperature from -40ºC to + 300ºC,
- Supported temperatures: -40ºC to + 350ºC,
- Gray.
Mode of use:
- Store in a well ventilated, cool and dry place.

Prototype Protoboard Breadboard 170 points Arduino features:
- 170 connections
- Base with adhesive to attach it to the work surface
- Measurements: 45x35x9mm
- Various colors

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK.

It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Arduino Protoboard Breadboard 400 points features:
-400 Connections
-Linkable with other Plates
-Base with adhesive to attach it to the work surface
-Measures 82x55x8 mm

Prototype Breadboard Protoboard 840 points Arduino features:
- 840 Connections
- Linkable with other Boards
- Base with adhesive to attach it to the work surface
- Measures 165x55x8mm

AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.
Thermal conductivity:> 2.8 W / mK,

Prototype Board MB-102 Protoboard 830 points Arduino features:
- 830 Connections
- Linkable with other boards
- Base with adhesive to attach it to the work surface
- Measures 165x 55x8mm

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. The application method guarantees simplicity of use, and the product can be easily applied to various computer accessories and LEDs. Ideal as a heat transmitter from the heat pipe condenser to the heat exchanger in a vacuum solar collector. Thermal conductivity: 6 W / mK.

Anti-Adhesive No-Fat Dry Spray Based on PTFE. Dry, no-fat, anti-adhesive agent based on pure PTFE. Perfect greasing solution for surfaces that must be slippery, especially when it is required to protect them against contamination present in the environment. Very low friction factor.

Prototype Protoboard 2900 points + 65x Cable Jumper Male Arduino features:
- 2900 connections
- Measurements: 20x24x2cm

Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.
Application: Installation of boilers, furnaces, motors, heating systems, water pumps.

Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg features:
A compound for etching of printed circuit boards and pickling of copper. An ideal alternative to ferric chloride. It is readily soluble and does not crystallize from the solution. It etches evenly, ensures the sharpness of contours and minimizes undercutting. Usage: Dissolve the preparation in 0.5 l of water at a temperature of 50°C. Perform etching at 40°C (max. 50°C). Bath movement ensures quicker etching. The etching solution must not be stored in hermetically sealed containers due to the risk of developing overpressure and cracks.

The grease reduces the friction of the metal parts to a minimum. Provides lasting protection against rinsing and abrasion.
Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis.

2 Double Side Prototype PCB Board 3x7cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm

The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.
It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.
Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application.

25x M3x6 Nylon Screw features:
-Polyamide 6mm Thread Arduino Robot PCB Screw
-M3 Screw
-Thread: 6mm
-Round head
-Star (Philips) DIN7985
-Quantity: 25 units
-Color: white

Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections.

25x M3x4 Nylon Screw features:
-Polyamide 4mm Thread Arduino Robot PCB Screw
-M3 Screw
-Thread: 4mm
-Round head
-Star (Philips) DIN7985
-Quantity: 25 units
-Color: white

Liquid Flux for Alcohol-Based Rosin Welding 15ml features:
- Flux liquid alcohol-based for electronic welding
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- Capacity: 15ml
- Content of solid bodies 0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

25x M3x5 Nylon Screw features:
-Polyamide 5mm Thread Arduino Robot PCB Screw
-M3 Screw
-Thread: 5mm
-Round head
-Star (Philips) DIN7985
-Quantity: 25 units
-Color: white

25x M3x8 Nylon Screw features:
-Polyamide 8mm Thread Arduino Robot PCB Screw
-M3 Screw
-Thread: 8mm
-Round head
-Star (Philips) DIN7985
-Quantity: 25 units
-Color: white

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

20x M3x10 Nylon Screw features:
-Polyamide Thread 10mm Arduino Robot PCB Screw
-M3 Screw
-Thread: 10mm
-Round head
-Star (Philips) DIN7985
-Quantity: 20 units
-Color: white

The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features:
- The breaking voltage is ~ 30kV / mm.
- Preserves rubber, plastic
- A wide range of operating temperatures: -50 ° C to 200 ° C
- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU

20x M3x12 Nylon Screw features:
-Polyamide 12mm Thread Arduino Robot PCB Screw
-M3 Screw
-Thread: 12mm
-Round head
-Star (Philips) DIN7985
-Quantity: 20 units
-Color: white

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (like those of ROM cartridges)
- Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)
- Laser lenses in optical disk drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and LCD screen Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for slates.

Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.
It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces Silicone Oil 100ml to Lubricate features:
- Excellent dielectric properties
- It is used in different industrial processes as a lubricant (due to its greasy consistency)
- Particularly suitable for lubricating plastic and rubber parts
- Ideal as an insulating coating that does not harden
- High quality - manufactured in EU

20x M3x15 Nylon Screw features:
-Polyamide Thread 15mm Arduino Robot PCB Screw
-M3 Screw
-Thread: 15mm
-Round head
-Star (Philips) DIN7985
-Quantity: 20 units
-Color: white

20x M2x5 Nylon Screw features:
-Polyamide 5mm Thread Arduino Robot PCB Screw
-M2 Screw
-Thread: 5mm
-Round head
-Star (Philips) DIN7985
-Quantity: 20 units
-Color: white

20x M2x6 Nylon Screw features:
-Polyamide 6mm Thread Arduino Robot PCB Screw
-M2 Screw
-Thread: 6mm
-Round head
-Star (Philips) DIN7985
-Quantity: 20 units
-Color: white

Spray Contact Cleaner 300ml features:
A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections
- Has cleaning properties
- Used in audio technologies
- Protection against moisture and corrosion
- Prevents stray current