Development boards

Lilypad Battery Support Button Cell 3V CR2032 features:
- Battery holder for your Lilypad projects
- For 20mm diameter battery type CR2032
- ON / OFF control
- Connection points: 4

White Housing for Raspberry Pi 2, Pi3, Model B, B+ features:
- White shell case
- Housing for Raspberry Pi2 and Pi3, B and B +
- The color white
- Made of ABS
- Dimension: 95x 62x 26mm.

Blue LED.
The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Blue features:
- Operating voltage: 3 - 5 VDC
- Very bright
- Density of the PCB: 0.8 mm
- LED color: blue
- Size: 5.5x12.5 mm
- 1 LED included

Black Housing for Raspberry Pi 2, 3, Model B, B+ features:
- Black Case Shell Box
- Housing for Raspberry Pi2, Pi3, B and B +
- Color: Black
- Made of ABS
- Dimension: 95x 62x 26mm

LED of red color.
The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Red features:
- Operating voltage: 3 - 5 VDC
- Very bright
- Density of the PCB: 0.8 mm
- LED color: red
- Size: 5.5x12.5 mm
- 1 LED included

Transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Transparent color
- Made of ABS
- Dimension: 95x 62x 26mm

LED green.
The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Green features:
- Operating voltage: 3 - 5 VDC
- Very bright
- Density of the PCB: 0.8 mm
- LED color: green
- Size: 5.5x12.5 mm
- 1 LED included

Kit 3x Aluminium Dissipative Adhesive features:
- For Raspberry Pi 2 and Pi 3, B and B +
- Heatsink includes thermal sticker
- 1x aluminum heatsink for the microprocessor
- Dimension: 14x14x5mm
- 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator
- Dimension 9x9x4mm
- Quantity: 3 units

This support is a lilypad button to sew clothing or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Button Board features:
- Density of the PCB: 0.8 mm
- Size: 8x16 mm
- 1 LED included

For Raspberry Pi 2 and Pi 3, B and B +.
The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm
- Quantity: 1 unit

This module is a small source of energy, this board was designed to be as small and as indiscreet as possible.
Putting a battery type AAA and operating the power switch, will have a supply of 5 V to power a lilypad circuit.
Use up to 200ma, it is protected against short circuits. This card has AAA battery clips but can use a 1.2V to 5V input, the module increases the voltage up to 5V.
Lithium polymer batteries are an alternative to rechargeable batteries.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Power Supply 5V Step Up with AAA Batteries features:
- Type of batteries connectable: AAA
- Input voltage (of the batteries): from 1.5V to 5V
- Output voltage: 5V

Flat Cable GPIO 40 Pins M/F features:
- For Raspberry Pi 2 and Pi 3, B and B +
- Total length 20cm
- Quantity: 1 unit

This is a simple slide switch for LilyPad. Use it as a simple On / Off switch, or to control LEDs, buzzers, sensors, etc.
The switches in each panel have a capacity of 4V to 300 mA, but will operate at 5V with a current reduction.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Slide Switch Board 2 Positions Interruptor features:
- Switch two positions: On (ON) / Off (OFF)
- Density of the PCB: 0.8 mm
- Size: 7.75x18.1 mm

Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) features:
-Length: 25cm
-Quantity: 1 unit
-Female connectors at both ends
-High quality and good working condition
-easy to install and use

Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pressing the red, green and blue channels, you can create any color. Very bright output.
This is a common anode design: to turn on a channel, you simply need to ground one of the R / G / B pins to illuminate that channel.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Tri-Color LED RGB features:
- Operating voltage: 3 - 5 VDC
- Design of common anode
- Density of the PCB: 0.8 mm
- Outside diameter: 20 mm

50cm HDMI V1.3 Male to Raspberry PI 1080P Gold Silver features:
- For Raspberry Pi 2 and Pi 3, B and B +
- HDMI V1.3b cable and full 1080P (category 2) resolution
- Type A male at both ends
- High quality gold shielded connectors
- Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality
- Refresh rates up to 120Hz
- Length: 50cm
- Quantity: 1 unit

The buzzer plate for Lilypad is used for the development and application of configurations that require a buzzer to indicate, for example, warnings, warnings or as part of the correct operation of your device.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad Buzzer features:
- Operating voltage: 5 VDC
- Design of common anode
- PCB density: 0.5 mm
- Density of the buzzer: 20 mm
- Outside diameter: 20 mm

DS3231 Precision RTC Real Time Clock Module AVR ARM features:
- Can be used in projects of Arduino, Raspberry Pi, PIC, AVR
- Function compatible with the DS 3231
- Power supply voltage: +2.3 V to +5.5 V
- Temperature range: -40 ° C to + 85 ° C
- Low energy consumption
- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation
- Two alarm calendar
- Interface: I2C

The LilyPad development card is built with an ATmega 328 microcontroller, which has an Arduino bootloader.
It has a minimum number of components to keep a small size and allow the user a neat job and as small as possible.
LilyPad is designed to be easily integrated into clothing, e-textiles and "Wearables" projects. This card works from 2 to 5V. It presents an automatic reset for even easier programming.
The back of the LilyPad is completely flat.
It has a surface mount programming connector so that the head has a correct contact. Each LilyPad was creatively designed to have large connecting pads that allow it to be cooked to any garment.
Various inputs, outputs, energized forms and sensors are available for use. Lilypad 328 Main Board ATmega328 features:

The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4.
It has 9 digital input / output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery and a power button. restart
It contains everything necessary to support the microcontroller; simply connect it to a computer with a USB cable or a battery to start.
The LilyPad Arduino USB differs from previous LilyPad cards in that the ATmega32U4 has built-in USB communication, eliminating the need for a separate USB to serial adapter. This allows the LilyPad Arduino USB to appear on a connected computer as a mouse and keyboard, as well as a virtual serial / COM (CDC) port.

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:
> - Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation - Edge enhancement
- Noise level

This thread is designed to be used in Wearables projects because it provides a very firm grip on the fabric to be sewn.
What differentiates this thread from another thread is the fact that it is actually spun from this stainless steel fiber. This means that while it may not be easy to weld since it is steel, it also does not burn when you touch it with a soldering iron.
It is suitable for sewing machine (like a bobbin thread) it is particularly tense, which means that it firmly grasps the fabric and is not slippery. Lilypad Matching Conductive Sewing Thread Wearable features:
- Stainless steel fibers
- Resistance: 700 Ohm / m
- Thin and strong thread
- Includes 1 meter of wire

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.
AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out). The interface is very easy to use because all operations are controlled by the internal DRAM memory controller. VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features:
- Input voltage: 2.5V-3V
- Controller: AL422B FIFO buffer
- Operating power: 60mW / 15fps VGA YUV
- VGA resolution: 640x480 pixels (30fps),
- Maximum frame rate: 30fps VGA
- Flicker: 50Hz / 60Hz auto detection
- Lens size: 1/6 "
- Angle of view: 25 ° - Sensitivity: 1.3V / (lux- sec)
- SCCB (Serial Camera Control Bus) interface
- Output format: 8 Bits
- YUV />

Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features:
- Shield module for Raspberry Pi 2 and Pi 3, B and B +

The pixel board is equipped with a WS2812 that is actually RGB LED with a WS2811 built into the LED.
Several of these individual sessions can be chained together to form a screen or an addressable string.
Each LilyPad is creatively designed to have large connecting pads so that they can be sewn on clothes. Pixel Board WS2812 for Lilypad features:
- Use the WS2812S chip
- RGB color lights
- Each LED can be controlled individually
- You only need one control line and two power cables
- Arduino libraries and routines available
- Density of the PCB: 0.8 mm
- Size: 20x3 mm

T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin features:
- Shield expansion module for Raspberry Pi 2 and Pi 3, B and B +
- Dimension: 6 x 7.3x 1.9mm

The good thing about LiPower is the ability to use rechargeable lithium polymer batteries.
These batteries are smaller, flatter and last much longer than an AAA battery.
Connect a single-cell LiPo battery, turn on the power switch and you will have a 5V supply to power your LilyPad network. It can deliver the current up to 150mA. Protected against the short circuit.
This board has a JST connector, which will be connected to single cell LiPo batteries terminated in JST.
It also has terminals for charging the LiPo battery with LiPo chargers. Each LilyPad was creatively designed to have large connection pads that allow them to sew on clothes.

T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features:
- Shield to connect with breadboard
- Dimension: 6 x 7.3x 1.9mm
- Flat cable female / female 40 pins
- Total length: 25cm
- Quantity:
1x shield
1x flat cable

Mobile Charger 5V 3A 3100mA Micro USB 15W features:
- Raspberry PI Red Power Supply
- Charger for Raspberry Pi 2 and Pi 3, B and B +
- External 220V a 5V / 3.1A (3100mA) 15W
- Plug type: Micro USB
- Additional USB A socket
- AC-DC adapter - 100-265V AC input, 50-60Hz - Output 5V / 3.1A (3100mA) 15W
- Cable length: 130cm
- RoHs, CE - High Quality

2 Channel Relay Module 5V 10A for Arduino features:
- 5V relay module with 2 optocoupled channels
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- LED indicator: For each channel
- Dimensions: 40x 50mm

Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features:
- Interface type: USB
- Supports IEEE 802.11e draft 802.11n
- Supports USB 2.0, compatible with USB 1.1 and 1.2
- Support systems:
- Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux
- Operating distance: 91 meters indoors, 275 meters in open space
- Transfer rate: 150Mbps (downlink) and 150Mbps (uplink)
- Works with old Wireless-G and Wireless-B networks
- WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM
- Frequency range: 2.4 to 2.4835 GHz
- Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment
- Transmission mode: DSSS

This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included.
The module offers a set of mini jumpers to configure the GPIO.

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. 

Kingston Class 10 MicroSD 8GB Memory Card features:
- SDHC Class 10 UHS-I (SDC10G2 / 8GBSP) for Raspberry
- Capacity: 8Gb
- Class: 10 - MicroSD dimensions 11mm x 15mm x 1mm
- FAT32 format
- Service temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3V

Toshiba Class 10 16GB MicroSD Memory Card features:
- Capacity 16GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3

Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: USB A, without cable
- Indicator of operation: LED diode

Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: micro USB
- Cable length 85cm

The Raspberry Pi 3 Model B+ is the penultimate product in the Raspberry Pi 3 range. It is the significant evolution in board performance compared to Raspberry Pi 3 B with the increase in processor frequency from 1.2 GHz to 1.4 GHz. Compared to serial 2 the board offers standard 802.11 b-g-n and bluetooth BLE 4.1 connectivity.

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case 

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. Black Box for Raspberry Pi features:
- Case size: 94x63.5x30mm
- Does not include Raspberry Pi

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Characteristic: 1 cover sink:
- Dimensions: 13x12x5mm
1 blue aluminum sink:
- Dimensions: 9x9x12mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm 1 flat metal sink gold color:
- Dimensions: 12x12x1mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm
1 flat gold metal sink:
- Dimensions: 12x12x1mm
1 green aluminum sink:
- Dimensions: 19x19x8mm

- Caja Case Shell Box
- Carcasa para Raspberry Pi 2 and Pi 3, B and B+
- Color transparente
- Dimensión: 89x70x25mm

Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Color transparent black - Dimension: 89x70x25mm

Transparent green housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Transparent green color - Dimension: 89x70x25mm

Clear blue housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Transparent blue color - Dimension: 89x70x25mm

Ethernet Patchcord UTP 5e 1m features:
- For Raspberry Pi 2 and Pi 3, B and B +
- HDMI V1.3b cable and full 1080P (category 2) resolution
- Type A male at both ends
- High quality gold shielded connectors
- Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality
- Refresh rates up to 120Hz
- Length: 50cm
- Quantity: 1 unit

SNES Controller / Joypad / USB Gamepad / Super SNES Controller
Classic Super SNES USB Controller supports the operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond,
Arcade, Nintendo, Raspberry pi and Model 2B pi emulator, Retro Pi OS
The SNES controller works with any emulator you want to download and use.
The Google SNES emulator, then the same for ROMs (for example: Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.)
Super SNES USB 1.5m controller features:

- USB SNES controller with standard USB 2.0 port,
- Actual cable length: 1.5 meters (59 inches),
- Works very well with the Raspberry emulation,
- Weight: 200g.

Gray Patchcord UTP CAT5E Ethernet cable 5m length with RJ45 connectors.
5m UTP5 Ethernet patch cable features:

- Connector: RJ45,
- Data transmission at speeds up to 100 Mbps,
- Frequencies: up to 100 MHz,
- Cable length: 5m,
- Cable type: UTP CAT5E 4x2x26AWG EIA / TIA 568B,
- Color: gray.
Carries its RoHS certificate .

The Ethernet Patchcord UTP 1m male A cable. Perfect for Raspberry Pi 2 and Pi 3, B and B+. ROHS certified

Voltage sensor module 0.02445V ~ 25V directly connectable with any version of Raspberry Pi.
LED Matrix 16x8 red MAX7219 Waveshare for Raspberry Pi features:

- Manufacturer: Waveshare
- LED Array: 16x8
- LED Driver: MAX7219
- Voltage operating: 5V
- SPI communication
- Output connector: supports any revision of Raspberry Pi (directly connectable)
- Dimensions: 6.43 × 3.50 × 2.65cm.

The Raspberry Pi 3 Model A + extends the Raspberry Pi 3 range to the A + board format.

• - Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit 1.4 GHz SoC
• - 512MB LPDDR2 SDRAM
• - 2.4GHz and 5GHz IEEE 802.11.b / g / n / ac Wireless LAN, Bluetooth 4.2 / BLE
• - Extended 40-pin GPIO header
• - HDMI full size
• - Individual USB 2.0 ports
• - CSI camera port to connect a Raspberry Pi camera module
• - DSI display port to connect a Raspberry Pi Touch display
• - 4-pole stereo output and composite video port.
• - Micro SD port for charging your operating system and storing data.
• - 5V / 2.5A direct current input. Hardware Specifications:

HDMI TFT LCD screen for Raspberry Pi included in a complete package (adapters, stands, cables) for a compatible connection very easy with the Raspberry Pi.
7 inch TFT LCD 1024x600 for Raspberry Pi controller kit features:

300cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 300cm
- Quantity: 1 unit

500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 500cm
- Quantity: 1 unit

32GB Class 10 MicroSD memory card with adapter features:
- Capacity 32GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

64GB Class 10 MicroSD memory card with adapter features:
- 64GB capacity
- Class 10
- MicroSD dimensions 11mm x 15mm x 1mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

Read speed: up to 100 MB / s
5 years warranty
Shock resistant
Waterproof
Use with cameras, mobile phones Toshiba Class 10 MicroSD 16GB Memory Card with adapter features:
- Capacity 16GB
- Class 10 UHS-1 U1
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3