VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps
  • VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps
  • VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps
  • VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps
  • VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps
  • VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps

VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps

M0114

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.
AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out). The interface is very easy to use because all operations are controlled by the internal DRAM memory controller. VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features:
- Input voltage: 2.5V-3V
- Controller: AL422B FIFO buffer
- Operating power: 60mW / 15fps VGA YUV
- VGA resolution: 640x480 pixels (30fps),
- Maximum frame rate: 30fps VGA
- Flicker: 50Hz / 60Hz auto detection
- Lens size: 1/6 "
- Angle of view: 25 ° - Sensitivity: 1.3V / (lux- sec)
- SCCB (Serial Camera Control Bus) interface
- Output format: 8 Bits
- YUV />

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps description

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.
AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out).

The interface is very easy to use because all operations are controlled by the internal DRAM memory controller.

VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features:

- Input voltage: 2.5V-3V
- Controller: AL422B FIFO buffer
- Operating power: 60mW / 15fps VGA YUV
- VGA resolution: 640x480 pixels (30fps),
- Maximum frame rate: 30fps VGA
- Flicker: 50Hz / 60Hz auto detection
- Lens size: 1/6 "
- Angle of view: 25 ° < br /> - Sensitivity: 1.3V / (lux- sec)
- SCCB (Serial Camera Control Bus) interface
- Output format: 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment < br /> - Color level saturation
- Edge enhancement
- Noise level
- Operating temperature: -30 ° C ~ + 70 ° C

Customers who bought this product also bought

1.44 inch TFT LCD screen 128x128 SPI

1.44 inch TFT LCD screen 128x128 SPI features:
- TFT LCD screen 128x128 pixels
- 4-wire SPI interface (A0, SDA, SCK, CS)
- Size: 1.44 inches
- Interface: SPI
- Resolution: 128 * 128
- Visual area: 1: 1 square
- Color screen TFT, the effect is much better than other small CSTN displays
- Disk drive: ST7735
- Fully compatible and alternative 5110 interface
- Onboard LDO, 5V / 3.3 input voltage support V
- Screen dimensions: 30 x 28 mm
- PCB dimensions: 45 x 32 mm

P0048

Price €5.78

SONOFF MS01- Smart Soil Moisture Sensor

MS01 works with SONOFF TH10/16 to accurately measure soil moisture and send data to your mobile phone. MS01 can regularly water and check soil moisture anytime and anywhere to make your flowers grow healthier. This is an accessory used in SONOFF TH10 / TH16.

WS044

Price €12.31

SONOFF AL010 RJ9 Adaptor

SONOFF AL010 RJ9 Adapter dedicated to sensors compatible with the previous Sonoff TH16 series, where there was a Mini Jack connector.

Suitable for temperature and humidity sensor AM2301 and Si7021, waterproof temperature sensor DS18B20 and soil moisture sensor MS01.

WS075

Price €2.31

MH-Z1311A low-power consumption NDIR CO2 sensor

Low power CO2 sensor MH-Z1311A, the current consumption is only 150-200uA, waterproof and anti-corrosion, high sensitivity, additionally characterised by excellent linear output. It is very popular used for battery monitors and IAQ devices.

S0158

Price €24.37

Sonoff sensor AM2301

Sonoff S26 is the freshest version of an intelligent socket made for EU power standards. It is extremely user friendly - you only need to plug it in your socket and pair with your device and it should run!

WS009

Price €5.69

MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB

MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features:
- Booster module
- The output voltage may be greater than the input voltage
- Use a multimeter to check the output voltage and adjust the potentiometer
- Input voltage: 2-24V
- Output voltage: 5-28V
- Current output: 2A - Operating temperature: -40ºC to + 85ºC
- Conversion efficiency: up to 93%
- Size: 17.5 x 30 mm

A0065

Price €1.40

Wheel for continuous rotation servo SG90 Servo FS90R

Wheels for 360 degree continuous rotation servo motors type SG90, FS90R, SG92r. The wheels have silicone tyres and measure 60 mm (2.36″) in diameter. Four additional mounting holes for 4-40 bolts allow the wheel to be used with several of our universal mounting bracket.

R0091

Price €1.57
€12.06

12,06 tax excl.

1
Last 7 items
Price €12.06

Order until 4pm we will send today
30 days return