VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos
  • VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos
  • VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos
  • VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos
  • VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos
  • VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos
  • VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos

VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos

M0103

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:
> - Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation - Edge enhancement
- Noise level

OEM
5905323232242
Add to wish list

VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos description

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.

VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:


>

- Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation
- Edge enhancement
- Noise level
- Operating temperature -30 ° C ~ + 70 ° C

Customers who bought this product also bought

Sensor Shield V5 APC220 Arduino compatible

Arduino Sensor Shield V5 APC220 features:
Sensor Shield V5.0 allows: - Being punctured directly to an Arduino Uno, Mega, Leonardo plate
- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more

M0001

Price €2.39

Arduino compatible Attiny85 Digispark board

Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter.
Similar to the Arduino line , It is one of the smallest boards on the market.
Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others.
You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features:
- USB power supply
- External power supply (7v-35v DC 12v maximum recommended)
- 5V DC 500mA regulator on board
- Programmable with the Arduino IDE
- Loaded with Micronucleus bootloader

B0002

Price €4.05

Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE

- Bluetooth 4.0 AT-09 BLE Master / Slave module with 6-pin connection base
- This module is very similar to HM-10 module
- Bluetooth protocol: Bluetooth V4.0 BLE specification
- Ultra-low power consumption, in 90uA standby mode
Wireless Module AT-09 Bluetooth 4.0 CC2541 IOS BLE features:

- Chipset based on CC2541
- Bluetooth Class 2
- Industrial level Bluetooth module SPP
- Flash 256Kb
- Integrated chip antenna
- Power supply: + 3.3 VDC 50 mA
- Working temperature: -5 C to + 60 C
- Operating frequency: 2.4 GHz ISM Band
- Modulation method: GFSK (Gaussian Frequency Shift keying)

W0078

Price €4.09

Screen OLED 0.96" 128x64 Blue I2C

It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features:
- Interface: I2C (logical level 3.3V)
- Resolution: 128 x 64
- Angle of view: & gt; 160 degree
- Screen color: blue
- Screen Dimension: 2.43cm / 0.96 "
- IC Controller: SSD1306
- Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70
- Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 "

P0096

Regular price €5.37 -€1.51 Price €3.86

DRV8825 + Radiator Stepstick Stepper Driver Motor Pololu 3D Printer

It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations.
Characteristic:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 45 V
- Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32
- Factory soldered temples
- 4-layer PCB, 2 oz. Copper for improved heat dissipation
- Short-circuit and overtemperature protection - Use potentiometer to adjust the current
- Measurements: 20x16x12 mm

I0012

Price €2.88

Raspberry Pi 4 Modelo B 4GB RAM

The Raspberry Pi 4 Model B is the latest product in the Raspberry Pi family of computers. This product is in the 4GB RAM version, with 2GB (B0068) and 1GB (B0067) versions also on offer.

B0069

Price €49.50

ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 51 x 19 x 16 mm

W0006

Price €8.18
€4.79
Save €1.00 €3.79

3,79 tax excl.

1
11 items
Regular price €4.79 Price €3.79

Order until 4pm we will send today
30 days return