LED Matrix 16x8 red MAX7219 Waveshare for Raspberry Pi

LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

8x8 LED Matrix Kit MAX7219 Arduino PIC Dot Matrix Display Cascade DIY features:
- 8X8 LED matrix controlled by MAX7219 chip
- 3mm red LED
- SPI communication
- Voltage: 4.7 - 5.3V DC
- Interfaces to manage multiple modules in cascade
- Matrix dimensions: 32mm x 32mm x 8mm
- PCB dimensions: 32mm x 50mm

LED Display Screen Board Matrix 8x8 Common Cathode/Columns Common Anode Red Dots features:
- Supply voltage of the LED points: 1.8-2.4 VDC
- LED color of the dots: red
- Pin numbers: 16
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 120mA
- Power consumed per segment: 80mW
- Segment numbers (points): 64
- Diameter of a point: 3mm
- Operating temperature: -35 ° C - + 85 ° C
- Storage temperature: -35 ° C - + 85 ° C
- Screen with common cathode connection for the rows and common anode for the columns
- Screen size: 32x32x8 mm

Led Matrix 8x8 MAX7219 Soldier features:
- MAX7219 controller module with 8x8 led matrix + cables
- 8X8 LED matrix controlled by MAX7219 chip
- Led 3mm red color
- SPI communication
- Voltage: 4.7 - 5.3V DC
- Interfaces to manage multiple modules in cascade
- Matrix dimensions: 32mm x 32mm x 8mm
- PCB dimensions: 32mm x 50mm

Ideal for projects with ARDUINO
You can use it with PIC, AVR, STM32
LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight features:
- Graphic LCD Screen 128x64 points
- 5V power
- Blue retro background illuminated, white letters
- Controller ST7920
- Parallel / serial communication
- Dimensions PCB 93x70mm

This connector can be used in most modeling projects.
It is ideal for small Lipo and NiMH connection. JST Female 15cm AWG 18 features:
- Type: female JST connector for RC BEC Lipo
- Color:
- Black: low power polarity
- Red: high power polarity
- Length: 20cm

4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.
The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features:
- 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix
- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)
- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default)

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 2600mAh (discharge of 0.2C, 2.75V)
- Minimum capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.63V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1300mA, fast charge: 2600mA
- Charging time: standard charge: 3 hours, fast charge: 2.5 hours
- Max. Charging current: 2600mA (ambient temperature 25 °)
- Max. Discharge current: 5200mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.75V
- Cell weight: 47.0g maximum
- Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max.