3D Printers

Linear Bearing LM12UU 12mm Ball Bearing for 3D Printer RepRap Prusa features:
- Reprap Prusa 3D Printer
- Measurements:
* Internal diameter 12mm
* External diameter 21mm
* Length 30mm
- Enclosure material: chrome-plated anti-corrosion steel
- Inner support material: technical plastic

Characteristic: - Supports up to 280ºC
- Electrical and antistatic insulation
- Resistant to acid and alkaline products
- Resistant to solvent
- Adhesive
- Approx Length: 26m
- Polyamide adhesive tape 5mm x 26m
- Known as Kapton polyamide tape
- Product for welding works on those that need to protect some component from heat

Bowden connector - a pneumatic connector with a 9.7mm screw and 1.75 cm length for the 6mm tube of 3D printer couplers for 1.75mm filament. 

Characteristic: - Supports up to 280ºC
- Electrical and antistatic insulation
- Resistant to acid and alkaline products
- Resistant to solvent
- Adhesive
- Length Approx: 33m
- Polyamide adhesive tape 10mm 
- Known as Kapton polyamide tape
- Product for welding works on those that need to protect some component from the heat

Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC
Characteristic:
- Diameter: 0.2 / 0.3 / 0.4 mm
- Shank diameter approx. 3,2mm
- Total length approx. 38mm
- Material: Steel
- Quantity: 10 units
- High quality drill bits for making custom nozzles or cleaning block nozzles
- 3D printer bits - Drilling and cleaning of nozzles - 0.2 0.3 0.4 mm - RepRap

Characteristic:
- Supports up to 280ºC
- Electrical and antistatic insulation
- Resistant to acidic products and alkaline
- Solvent resistant
- Adhesive
- Length Approx: 26m

Linear Bearing LM8UU 8mm Ball Bearing for 3D Printer RepRap Prusa features:

- Measurements:
* Internal diameter: 8mm
* External diameter: 15mm
* Length: 24mm
- Enclosure material: anti-corrosion chrome steel
- Inner support material: technical plastic

High Temperature Heat Resistant Thermal Tape Polyamide features: Supports up to 280ºC. Thickness 0.5mm, width 100mm, length 26m.

Flexible Coupler 5mm/5mm Z-axis CNC 3D Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 5mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm

Characteristic: - Supports up to 280ºC
- Electrical and antistatic insulation
- Resistant to acid and alkaline products
- Resistant to solvent
- Adhesive
- Length Approx: 26m
- Known as Kapton polyamide tape
- Product for welding jobs where it is necessary to protect some component from heat

3x Heat Sink Aluminium Adhesive A4988 DRV8825 features:
- Package includes: 3x Heatsink with adhesive
- Ideal for DRV8825, A4988 etc
- Dimensions: 9 x 9 x 5mm

5mm copper tape

Conductor features: material copper foil, size: 5 mm x30 m, copper foil thickness: 0.05 mm, conductive, adhesive, approx length: 30m. Applications:
 EMI and RF shielding, paper circuits, soldering, electrical repairs, slug repellent.

- Inner diameter: 12mm
- Quantity: 1 unit

10mm copper tape - Conductor features:
- Material: copper foil - Size: 10 mm — 30 m - Copper foil thickness: 0.05 mm - Conductive - Adhesive - Approx Length: 30m Applications:
- EMI and RF shielding, - paper circuits, soldering, - electrical repairs, - slug repellent.

- Inner diameter: 8mm
- Quantity: 1 unit

10mm copper tape - Conductor features:
- Material: copper foil - Size: 20 mm — 30 m - Copper foil thickness: 0.05 mm - Conductive - Adhesive - Approx Length: 30m Applications:
- EMI and RF shielding, - paper circuits, soldering, - electrical repairs, - slug repellent.

- Measurements:
- Inside diameter D: 4mm
- Outside diameter D: 13mm
- Width - dimension B: 5mm
- Quantity: 1 unit

Thermal transfer paper enables PCB manufacturing.
After designing the printed circuit in one of many programs, you must print the project on paper on a slippery page (in the reflected image) with a laser printer. The pattern (printed side) is transferred to the laminated plate from the copper side using the hot iron (the toner adheres to the copper under the influence of temperature).
It remains only to peel off the paper under water and start to engrave the laminate. It can be attacked with the Printed Circuit Recorder solution A4 Thermal Transfer Film for DIY PCB circuits features:

- material: A4 thermal transfer foil - quantity: 1 sheet

- Measurements:
Inside diameter d: 5mm
Outside diameter D: 14mm
Width - dimension B: 5mm
- Quantity: 1 unit

- Measurements:
* Inner diameter D: 5mm
* Outside diameter D: 14mm
* Width - dimension B: 5mm
* Dimension C1: 1mm
* Dimension D1: 16mm
- Quantity: 1 unit

- Measurements:
* Inner diameter D: 4mm
* Outside diameter D: 13mm
* Width - dimension B: 5mm
* Dimension C1: 1mm
* Dimension D1: 15mm
- Quantity: 1 unit

4x M3 x45 Screw Kit 3D Printer Leveling Spring features:
- 4x M3 x45mm steel screw and knurled nut
- 4x Leveling Springs, Hot Bed, 3D printer Extruder
* Outside diameter: 7.5mm
* Inner diameter: 5mm
* Length: 20mm

Extruder Kit MK8 Aluminium 1.75mm Strand 3D Printer Reprap Prusa features:
- MK8 1.75mm filament extruder kit
- Includes:
* MK8 extruder complete push system
* Square part dimensions: 40x40mm
* Part dimensions - handle L: 44x28mm

Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC
Characteristic:
- Diameter: 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.7 / 0.8 / 0.9 / 1.0 / 1.2 mm
- Shank diameter approx . 3.2mm
- Total length approx. 38mm
- Material: Steel
- Quantity: 10 units

- Measurements:
Inner diameter d: 8mm
Outside diameter D: 22mm
Width - dimension B: 7mm
- Dimension C1: 1,5mm
- Dimension D1: 25mm
- Quantity: 1 unit

5x Bearing 608ZZ 8mm RepRap 3D Printer features:

- Ball Bearing 3D Printer Reprap Prusa
- Measurements:
Inside diameter D: 8mm
Outside diameter D: 22mm
Width - dimension B: 7mm
- Quantity: 5 units

T8 R2 80cm Spindle Kit with Bearing Support, Nut and Coupler features:
- With bearing bracket, nut, coupler for CNC 3D Printer
- T8 spindle
- Type: Trapezoidal screw
- Diameter: 8mm
- Tooth distance: 2mm
- Lengths: 800 mm
- Coupler 5mm / 8mm

Support for 30mm Fan E3D V6 3D Printer features:
- Support for 30mm fan
- Compatible with E3D V6
- For hotels with 22mm diameter
- E3D V6 Cooling Fan Cover 3D Printer
- Unique design surrounded, close contact with the radiator, gather wind around the radiator so that the heating block can work normally

4x Springs Leveling Hot Bed 3D Printer features:
3D Springs printer Bed level extruder for RepRap Prusa Mendel - A strong spring for 3D Printer Extruder
- Excellent elasticity, resistance to fatigue
- Nickel plating, corrosion resistance, high hardness
- Material: Carbon steel
- Outside diameter: 7.5mm
- Inner diameter: 5 mm
- Spring height: 20 mm
- Quantity of the ring: 9 rings
- Surface treatment: Nickel-plating

2x Spring Tensioning Strap Printer features:
- Use with 6mm strap
- Timing Belt GT2 Tensioner Spring for RepRap Prusa Mendel 3D printer
- Fits 3D printer timing belt system
- Fits belt width: less than or equal to 6mm
- Constant force to keep belt reasonably tight to avoid losing steps, skipping steps or unwanted movements
- Material: Metal
- Silver color
- Size: 12 x 12 x 8 mm (length x width x height)
- Quantity: 2 units

Pulley GT2 20 Teeth 8mm Bore Aluminum 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 16mm
- Inner hole: 8mm
- Use with strap: 6mm and 6.35mm
- Toothed width 7mm
- Quantity: 1 unit
- Ideal for fixing on the axis of the motors of your 3D printer

Flexible Coupler 5mm/8mm Z-axis CNC 3D Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to an 8 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 8mm

Linear Bearing LM16UU 16mm Ball Bearing for 3D Printer RepRap Prusa features:

- Reprap Prusa 3D Printer

- Measurements:
* Internal diameter 16mm
* External diameter 28mm
* Length 30mm
- Enclosure material: chrome-plated anti-corrosion steel
- Inner support material: technical plastic

Pulley GT2 20 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 18mm
- Inner hole: 5mm
- Use with strap: 6mm and 6.35mm
- Ideal to fix on the axis of the motors of your 3D printer

Pulley GT2 36 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 36
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 25mm
- Inner hole: 5mm
- Use with strap: 6mm and 6.35mm
- Ideal to fix on the axis of the motors of your 3D printer

Pulley GT2 16 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 16
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 13mm
- Inner hole: 5mm
- Use with strap: 6mm
- Quantity: 1 unit of 16 teeth GT2 pulley, 6mm wide and 2 studs
- Ideal for fix on the axis of the motors of your 3D printer

GT2 Strap Kit 2m + 2x Pulley GT2 16 Teeth 6mm features:
- Number of teeth: 16
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 13mm
- Inner hole: 5mm
- Use with strap: 6mm
- GT2 strap made of rubber with fiberglass reinforced
- Length 2m
- Width: 6mm
- Belt height: 1.38 mm Ideal to fix on the axis of the motors of your 3D printer.

- Inner diameter: 16mm
- Quantity: 1 unit

1m 6mm GT2 strap 3D printer features:
- GT2 rubber strap with fiberglass reinforced
- Length: 1m
- Width: 6mm
- Strap height: 1.38 mm

Trapezoidal nut 2mm pitch for spindle diameter 8mm Characteristic:
- Diameter: 8mm - Toothed distance: 2mm - A 360º turn is equivalent to a 2mm linear advance
- Quantity: 1 unit

T8 Spindle 50cm with Trapezoid Nut R2 features:
- Type: Trapezoidal Screw
- Diameter: 8mm
- Tooth distance: 2mm
- Lengths: 500 mm
- Quantity:
* Nut 1 unit
* Spindle 1 unit

T8 Spindle 80cm with Trapezoid Nut R2 features:
- Type: Trapezoidal Screw
- Diameter: 8mm
- Tooth distance: 2mm
- Lengths: 800 mm
- Quantity:
* Nut 1 unit
* Spindle 1 unit

Bowden connector - a pneumatic connector with an M5 screw and 1.75 cm length for the 4mm tube of 3D printer couplers for 1.75mm filament. 

T8 R2 50cm Spindle Kit with Bearing Support, Nut and Coupler features:

- With bearing bracket, nut, coupler for CNC 3D Printer
- T8 spindle
- Type: Trapezoidal screw
* Diameter: 8mm
* Tooth distance: 2mm * Lengths: 500 mm
- Coupler 5mm / 8mm
* Material: Aluminum alloy

Bowden connector - a pneumatic connector with a 6 mm screw and 1.75 cm length for the 4mm tube of 3D printer couplers for 1.75 mm filament. 

Bowden connector - a pneumatic connector with a 9.7mm screw and 1.75 cm length for the 4mm tube of 3D printer couplers for 1.75mm filament. 

Pulley GT2 40 Teeth 6mm Aluminium 3D Printer Reprap CNC features:
- Number of teeth: 40
- Pitch: 2mm
- Material: Alloy aluminum
- Outside diameter: 27mm
- Inside hole: 5mm
- Use with strap: 6mm and 6.35mm

Pulley GT2 60 Teeth 5mm Aluminium 3D Printer Reprap CNC features:
- Number of teeth: 60
- Pitch: 2mm
- Material: aluminum alloy
- Outside diameter: 44mm
- Inner hole: 5mm
- Use with strap: 6-7mm GT2 Ideal to fix on the axis of the motors of your 3D printer, CNC machine.

SCS16UU is aluminum block shell. LM16UU linear bearing built-in.

It's a slide block for 16mm smooth rods.

Flexible Coupler 6mm/8mm CNC 3D Printer Shaft features:
- Flexible coupling in high quality aluminum with which you can join Nema 17, 6mm stepper motors to an 8 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 8mm

High quality flexible aluminum coupler, so you can join Nema 17, 6.35mm stepper motors to an 8mm threaded rod. They incorporate 4 captive screws so you can perfectly fix the couplings to the rod. Flexible Coupler 6.35mm/8mm shaft features:
- Material: Aluminum alloy
- Coupler height ( L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6.35mm / 8mm - Quantity 2 units

High quality aluminum flexible coupler, so you can join Nema 17, 8mm stepper motors to an 8mm threaded rod. They incorporate 4 screws studs so you can perfectly fix the couplings to the rod. Flexible Coupler 8mm/8mm shaft features:
- Material: Aluminum alloy
- Coupler height (L ): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 8mm / 8mm - Quantity - 2units

High quality flexible aluminum coupler, so you can join Nema 17, 8mm stepper motors to a 10mm threaded rod. They incorporate 4 screws captive so you can perfectly fix the couplings to the rod. Flexible Coupler 8mm/10mm shaft features:
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- External diameter: 19mm
- Shaft diameter: 8mm / 10mm - Quantity 2units

High quality flexible aluminum coupler, so you can join Nema 17, 6mm stepper motors to a 10mm threaded rod. They incorporate 4 screws studs so you can perfectly fix the couplings to the rod. Flexible Coupler 6mm/10mm shaft features:
- Material: Aluminum alloy
- Coupler height (L ): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 10mm - Quantity 2units

Flexible Coupler 5mm/6.35mm Z-Axis 3D CNC Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 6.35 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 6.35mm - Quantity 2units

Linear Bearing LM10UU 10mm Ball Bearing for 3D Printer RepRap Prusa features:

- Measurements:
* Internal diameter 10mm
* External diameter 19mm

* Length 29mm
- Enclosure material: chrome-plated anti-corrosion steel
- Internal support material: technical plastic

Shaft Coupling Motor Connector 5mm 5mm CNC features:
- Fixed coupler in high quality aluminum
- They incorporate 4 captive screws so you can perfectly fix the couplings to the rod
- Fixed couplers are used to connect the motors step by step, servo AC DC to the spindle
- Widely used to build CNC router, CNC Plasma, CNC Mill, CNC Laser, many automation machines and on occasion of mechanical transmission
- Material: Aluminum Alloy
- Coupler height (L): 25 mm
- Outside diameter: 14mm
- Shaft diameter: 5mm / 5mm
- Screws Position: 4mm
- Flexible Shaft Couplers 5mm*5mm

Shaft Coupling Motor Connector 5mm 8mm CNC features:
- Fixed coupler in high quality aluminum
- They incorporate 4 captive screws so you can perfectly fix the couplings to the rod
- Fixed couplers are used to connect the motors step by step, servo AC DC to the spindle
- Widely used to build CNC router, CNC Plasma, CNC Mill, CNC Laser, many automation machines and on occasion of mechanical transmission
- Material: Aluminum Alloy
- Coupler height (L): 25 mm
- Outside diameter: 14mm
- Shaft diameter: 5mm / 8mm
- Screws Position: 4mm
- Flexible Shaft Couplers 5mm*8mm

Cable Chain 10x10 1m for 3D CNC Printer features:
- Suitable for movements where cable displacement or twisting is needed, where cable protection is needed - Easy for installation And maintenance; Low noise, high speed wear resistant movement - The cable structure has been widely used in CNC machine tools, electronic equipment, fire fighting machinery and equipment, stone machinery, machinery glass, doors and windows of machines, injection molding machines, robots, overweight transport equipment, automated warehouses - Interior widths 10x10mm
- Exterior measurement 15x20mm
- Material: reinforced series polyamide
- Length: 1m
- Quantity: 1 unit

Cable chain 15x20 1m for CNC 3D printer features:
- Suitable for movements where cable displacement or twisting is needed, where cable protection is needed - Easy for installation And maintenance; Low noise, high speed wear resistant movement - The cable structure has been widely used in CNC machine tools, electronic equipment, fire fighting machinery and equipment, stone machinery, machinery glass, doors and windows of machines, injection molding machines, robots, overweight transport equipment, automated warehouses. - Internal widths 15x20mm
- External measurement 20x28mm
- Material: reinforced series polyamide
- Length: 1m
- Quantity: 1 unit