ZPHS01B is an all-in-one air quality module, which integrates laser dust sensor, infrared CO2 sensor, electrochemical formaldehyde, ozone and carbon monoxide sensors, VOC sensor, NO2 sensor, temperature and humidity sensor.

The 6 DOF - 6-axis black aluminium arm is widely used in the field of teaching, personal production and amateur education, it can be seen as a demonstration platform with multiple degrees of freedom, its power system consists of six servo motors. So the arm can move, sideways and sideways, up and down, left and right to grasp any object. It comes with 6 servos already in set.

Amplifier for speakers, especially for cars, dual channel and with subwoofer. It operates at 12/24V and offers an output power of 50W for each channel + 100W subwoofer. Create your 2.1 speaker system with this amplifier.

The kit includes the UNO R3 Arduino compatible board and DIY protection box. UNO R3 Arduino board compatible has an Atmega328P chip running at 16Mhz with factory loaded bootloader. The module has all the connectors as the Arduino Uno R3 and is compatible with all Arduino shields. DIY protection box for Arduino UNO R3 made of high quality acrylic material.

The Arduino Engineering Kit Rev 2 is a versatile and practical learning tool. By creating fun, real-world projects, you can understand basic engineering and mechatronics concepts and learn to program in MATLAB and Simulink. The versatility of the elements gives you the opportunity to adapt the content and create your own curriculum based on it. The kit includes online courseware, step-by-step instructions, lessons and exercises. It works best when studying in small groups.

Arduino Mega 2560 R3  A000067 has been designed with larger and more ambitious projects in mind. It has 54 digital input / output pins (15 of which can be used as PWM outputs), 16 analog inputs, 4 UART (i.e. hardware serial ports). The large number of analog and digital pins, along with larger MEMORY, make the Mega 2560 ideal for devices such as 3D printers and other demanding applications. The Mega 2560 board is compatible with most shields designed for Arduino Uno.

The Portenta Breakout module extends the capabilities of the Arduino Portenta module with additional connectors and cables. The module includes a power switch, a DIP switch for selecting the start mode of the Arduino Portenta, as well as a series of connectors: USB A, RJ5, microSD, OpenMW, MIPI 20T JTAG. The board also includes the RTC chip, as well as a slot for the CR2032 battery, a screw connector for the power supply and all the cables for the Arduino Portenta module.

Imagine the simplicity of the Arduino One connected to the communication module. Seems too good to be true, right? That's Arduino One WiFi. Arduino Uno WiFi REV2 (ABX00021) with its integrated IMU (Inertial Measurement Unit) and WiFi is the ideal board to start making your first Internet application from scratch, or to use in the educational field. It has 14 digital input / output pins (5 of which are PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, an accelerometer, an RGB LED, a power connector and an ICSP header.

Barometric Pressure, Temperature and Altitude Sensor BMP180 features:
- Module based on the atmospheric pressure sensor BMP180
- Supply voltage: 1.8 - 3.6 V
- Energy consumption: 0.5uA
- I2C interface
- Measuring range: 300 - 1100hPa
- Dimensions: 10 x 13 mm
- Includes soldering pins

Basic Kit Soldering Iron 40W + Tin Roll + Mesh + Support Free Soldering Kit features:
- Tin soldering iron 40W 230V
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long tip length 1mm
- Anti-thermal handle
- Certifications CE, RoHS and TUV
- Rollo tin 10gram welding wires 1mm
- Copper mesh for desoldering 2mm / 1.5m
- FREE mini soldering iron holder

18650 battery base for soldering to PCB. Characteristic: - Measurements 78x 20x 21mm
- Weight: 10 gr. ( approx.)
- Stack length max 67mm

Battery holder for 18650 batteries connected in series.

Base of two 18650 batteries to solder on PCB. Characteristic: - Measurements 78x 40x 21mm
- Weight: 10 gr . (approx.)
- Stack length max 67mm

Battery Holder Button 3V CR2032 PCB CR2032 PCB features:
- Battery compartment for PCB printed circuit
- Quantity: 1 unit

LITHIUM POLYMER BATTERY Battery LIPO 1520mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 1520 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 51 mm -Battery width / diameter- 34mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2450mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2600mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2650mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2650 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 71 mm -Width / diameter of the battery- 95 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2750mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3350mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3400mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3900mAh 3.7V

The novelty of micro:Bit v2.2 for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package.

The novelty of micro:Bit for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package. 

- Ball Bearing 3D Printer Reprap Prusa
- Measurements:
Inside diameter D: 8mm
Outside diameter D: 24mm
Width - dimension B: 8mm
- Quantity: 1 unit

Black Heated Bed MK2B Reprap 3D Printer features:

- It can be powered with 12V or 24V current. It has FR4 laminate of 1.6m +- 0.15mm and 2 layers of 35μm copper.
- Measurements: 214x214 mm

- This 3D pen is suitable for ABS or PLA filaments of 1,75m
- Includes an LCD screen that allows you to read the temperature, speed and filament control
- It also comes with button controls to control the extrusion speed
- You can use this powerful 3D pen to draw, draw or trace objects on paper Blue 3D-Pen for ABS/PLA Filaments features:
- Input voltage: 12V
- Current consumption: 2A
- Diameter of the nozzle: 0.7mm
- Heating temperature: 160-230 degrees adjustable
- Ballpoint pen color: blue
- Filaments of random colors
- Includes PLA filament and power 100-240 VAC / 50 Hz - 12VDC / 2A
- Recommended for adults and children 8 years and older

This module includes the component BME280 that is translated into a digital signal.
The equipment uses the two I2C and SPI interfaces. The BME280 does not allow the module to be used as an altimeter as opposed to its successor BMP280.
Its 5-pin straight connector allows easy connection to other electronic boards. BME280 Digital Temperature Humidity Barometric Pressure Module features:
- Interfaces:
- I2C (up to 3.4 MHz)
- SPI (up to 10 MHz)
- Supply voltage: 1.8-5VDC
- Module operating range:
- Temperature: -40ºC to + 85ºC
- Humidity: 0-100%
- Pressure: 300-1100 hPa
- Resolution of the measures:
- Temperature: 0.01ºC
- Humidity: 0.008%
- Pressure: 0. 18Pa
- Accuracy of the measures:
- Temperature: +/>

This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.
The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.
Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features:
- Interfaces:
       -I2C (up to 3.4 MHz)
       -SPI (up to 10 MHz)
- Supply voltage: 1.8-5VDC
- Module operating range:
       - Temperature: -40ºC to + 85ºC
0-100%
       - Pressure: 300-1100 hPa
- Resolution of the measures:
       - Temperature: 0.01ºC

This module is an active buzzer for Arduino and emits different sounds at various frequencies.
It does not accept oscillation source, it only receives square waves for drive sound. 

Cable chain 10x20 1m CNC 3D printer features:
-Suitable for movements where cable displacement or twisting is needed, where cable protection is needed. - Easy for instalation and maintenance; Low noise, high speed wear resistant movement. - The cable structure has been widely used in CNC machine tools, electronic equipment, fire fighting machinery and equipment, stone machinery, glass machinery, machine doors and windows, injection molding machines, robots, overweight transport equipment, automated warehouses. - Interior widths 10x20mm
- Exterior measurement 15x28mm
- Material: reinforced series polyamide
- Length 1m
- Quantity: 1 unit

The device is designed to find and identify cables without disturbing the insulation. Finds broken wires, fault points and continuity test.

This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project. Capacitive Touch Sensor Module TTP229 - 16 Touch Sensitive Pads 

Car Robot Tire Wheel Smart Car features:
- Dimensions of the wheel:
   - Diameter: 65mm
   - Width: 26 mm
- Quantity: 1 unit

The zirconium ceramic tip of the CD-200/201 combines the wear resistance of a metal tip with the non-conductive and non-inductive properties of the plastic.
Ceramic alignment tool CD-20 features:
- Length: 11.5 cm,
- Screwdriver tip: flat,
- Tip length: 2mm.
- Suitable for: potentiometers, watchmaking, electronics components.

Professional processor charger XTAR PB2S for Li-ion 18650/(20700/21700 - unprotected only) batteries with power bank function.

The Circuit Scribe conductive ink pen, with its simple design, is perfect for this, allowing you to draw circuits instead of soldering or connecting them to a test board.  

CNC Shield + UNO R3 CH340 +4x A4988 Stepstick 3D Printer Arduino kit features:
- Content:
* 1x UNO R3 CH340 Compatible with Arduino
* 1x CNC Shield V3
* 4x A4988 Drivers
* 4x Heatsinks for A4988
* Jumpers

Compact instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute)