PLA Set of 20 colors Filament 1.75mm x 5m PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0301 ✗ Out-of-Stock Price €9.67
Adjustable DC Module LM2596 1,25-32V 3A Step Down 3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features: - Based on the LM2596S-ADJ regulator - Rectification: Asynchronous - Output Voltage: 1.25v - 32v DC (adjustable) - Voltage of Input: 3.2v - 35v DC - Max Output Current: 3A (with heat sink) - Ripple at output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2.5% - Operating Temperature: -40ºC to + 85ºC - Measurements 43x 21x 14 mm Code A0004 Available Price €1.64
Printer Heating Controller MKS Mosfet for Heatbed Extruder MOS Module Printer Heating Controller MKS Mosfet for Heatbed Extruder MOS Module features: - Superior performance of MOSFET- Maximum current - up to 30A (heat sink)- Can use control output signal Ramp1.4 (D8, GND-warm bed) and MKS series- To control - 5-24V digital signal Code I0093 Available Price €7.84
Digital Compass GY-273 Compas Magnetometer Three-axis electromagnetic field sensor module GY-273 including the HMC5883L chip that specifies the direction of the magnetic field of the ground. Digital Compass GY-273 Compas Magnetometer features: Supply voltage: 2.16 - 3.6 VDC, I2C interface with SCL, SDA, signals - Measurement range: 1.3 to 8 Gauss, Measurement resolution: 12 bits, Measurement accuracy: 0.73 - 4.35 Gauss, Transmission speed 400kHz, Sensitivity 230-1370 LSB / Gs, Output frequency: 75Hz, DRDY pin interruption, Dimensions of 18 mm x 13 mm. Code M0179 Available Regular price €3.13 -€0.50 Price €2.63
Fan 12V 2x Cables PC CPU case Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 15mm Code I0055 Available Regular price €2.88 -€0.90 Price €1.98
Pro Mini 8MHZ 3.3V Arduino compatible board Miniaturized compatible version of Arduino Pro Mini. It has an Atmega328P chip running at 8Mhz with a factory loaded bootloader. It does not include pins so - we can solder only the pins that we need. Pro Mini 8MHZ 3.3V Arduino compatible board features: - ATmega328P 8MHz chip with external quartz crystal - Auto-reset - micro switch - Integrated 3.3V regulator - FLASH 32kB memory - SRAM 1kB memory - EEPROM 1Kb memory - Analog input A0-A7 - 8 PWM channels - external interruption - TWI / I2C, UART, SPI interfaces - Power and status LEDs - Dimensions: 18x33mm - Weight: 30 grams An adapter is needed to program it Code B0017 Available Regular price €7.40 -€2.00 Price €5.40
UNO Board CH340 clone - It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields Characteristic: - ATmega328P 16MHz chip with external quartz crystal- Microprocessor: ATMega328P- Operating voltage: 5V- Input voltage (recommended): 7-12V- Input voltage (limits): 6-20V- Clock speed: 16 MHz- Digital I / O pins: 14 (6 with PWM)- Analog input pins: 6- DC current for Pin I / O: 20 mA- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P- SRAM 2 KB - AtMega328P- EEPROM 1 KB - AtMega328P- Communication: USB female Type B Code B0011 Available Price €6.19
GPS Mini Station NEO-6M-0-001 with EEPROM SMA IPEX Ports It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the start 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna (not included ): 18x18 mm - Size: 22x30x13 mm Code M0070 ✗ Out-of-Stock Price €12.31
Pink 3D-pen for ABS / PLA filaments Pink 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Pink 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: pink, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0154 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
PLA Set of 20 colors Filament 1.75mm x 5m PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0301 ✗ Out-of-Stock Price €9.67
Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0303 ✗ Out-of-Stock Price €24.79
Yellow 3D-pen for ABS / PLA filaments Yellow 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Yellow 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: yellow, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0152 Last items in stock Regular price €19.83 -€2.00 Price €17.83
ABS 20x Colors Filament 1.75mm 5m ABS 20x Colors Filament 1.75mm 5m features:- Ideal for 3D printing pen- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0300 ✗ Out-of-Stock Price €9.09
Purple 3D-pen for ABS / PLA filaments Purple 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Purple 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: purple, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0153 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
Pink 3D-pen for ABS / PLA filaments Pink 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Pink 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: pink, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0154 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
PLA Set of 20 colors Filament 1.75mm x 5m PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0301 ✗ Out-of-Stock Price €9.67
Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0303 ✗ Out-of-Stock Price €24.79
Yellow 3D-pen for ABS / PLA filaments Yellow 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Yellow 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: yellow, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0152 Last items in stock Regular price €19.83 -€2.00 Price €17.83
ABS 20x Colors Filament 1.75mm 5m ABS 20x Colors Filament 1.75mm 5m features:- Ideal for 3D printing pen- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0300 ✗ Out-of-Stock Price €9.09
Purple 3D-pen for ABS / PLA filaments Purple 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Purple 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: purple, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0153 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83