Trapezoid Nut 8mm P2 R8 D8 Trapezoidal nut for 8mm diameter spindle Characteristic: - Diameter: 8mm - Tooth distance: 2mm - A 360º turn is equivalent to a linear advance of 8mm - Quantity: 1 unit Code I0158 Available Regular price €2.90 -€0.91 Price €1.99
TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level This bidirectional logic level converter can be used with normal series, I2C, SPI and other digital signals. It does not work with an analog signal.It is very easy to use. The card must be powered from the two voltages (high and low voltage) used by the system.A high voltage (5 V for example) to the pin "HV", low voltage (3.3 V for example) in "LV", and the system ground to pin "GND". TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level features: - 2 high voltage channels and low voltage logic logic for bidirectional translation- 2 low voltage channels High voltage high voltage logic in unidirectional conversion- The board module is compatible, it can be inserted directly in the use test panel- HV to 5 V power Code M0154 Available Regular price €4.59 -€1.60 Price €2.99
TTL Converter Module 5V - 3.3V Bidirectional I2C Logic Level Connecting a 3.3V device to a 5V system is a challenge.The bidirectional logic level converter is a small device that safely drops the signals from 5V to 3.3V and increases 3.3V to 5V at the same time.This level converter also works with 2.8V and 1.8V devices. What really separates this logic level converter from our previous versions is that it can successfully set its high and low voltages and go up and down between them safely on the same channel.Each level converter has the ability to convert 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two sources of voltage (high voltage and low voltage) that your system is using. Code M0153 Available Regular price €4.99 -€2.00 Price €2.99
Tuya Smart - ZigBee 3.0 door/window open/close sensor This ZigBee open-close sensor provides information about the opening and closing status of the sensor, saving this data in memory. Ideal for knowing the status of doors and windows in intruder detection systems Code WT006 Available Regular price €14.90 -€2.00 Price €12.90
Tuya Smart - ZigBee 3.0 temperature and humidity sensor ZigBee temperature and humidity sensor provides accurate temperature and humidity measurements and stores this data in memory for one year. Broken down into days with hours, months and a year. Code WT004 Available Regular price €14.90 -€3.00 Price €11.90
UNI-T UT12D - Voltage detector non-contact test pen Test pen for non-contact voltage detection with LED torch and buzzer. Allows to differentiate between different lines of alternating current. AC voltage detection range is 24-1000V Code H0210 Available Regular price €10.89 -€2.00 Price €8.89
UNI-T UTG932E DDS Dual Channel Wave Function Generator Signal source. DDS UNI-T UTG932E 2-channel signal generator can generate sine wave, square wave, triangle wave, pulse wave and arbitrary wave, etc. The maximum output frequency of sine wave is 30MHz, sampling rate of 200 MSa/s. Code K0595 ✗ Out-of-Stock Regular price €169.00 -€20.00 Price €149.00
Unipolar Hall Effect Magnetic Sensor IC SH3144E Definition of the Hall effect: When a current passes through a bar of semiconductor (or conductive) material, and if an induction magnetic field B is applied perpendicularly to the direction of current flow, a voltage, called the Hall voltage, proportional to the magnetic field, and the current appears on the side faces of the bar. This voltage is proportional to the speed of movement of the charge carriers, It is considerably higher in semiconductor materials than in metal conductors. Magnetic Sensor Characteristic: - Input Voltage: 3.8-30VDC - Output current: 40mA High output current capacity -40 mA maximum absolute Quad-Hall design virtually eliminates static mechanical effects Magnetic compensated temperature - Digital current sinking output Code S0049 Available Regular price €0.90 -€0.25 Price €0.65
Universal LCD Digital Multimeter 1999 UNI-T UT58C Red The UT58 series is a safe and reliable hand-held digital multimeter that is easy to operate. Its large 60mm x 54mm LCD screen conveniently displays your measurement results. This series of digital multimeter caters to a variety of applications in the electrical and electronic fields This modern and compact digital multimeter has a large 4-digit LCD display that offers a great experience to the user. Voltage / current / resistance / capacitance / frequency analysis, bem as diode and continuity test. Max. Digits: 1999 3 ½ digits This multimeter meets IEC61010 standards: no pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0208 Available Regular price €37.90 -€5.00 Price €32.90
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Last items in stock Regular price €31.99 -€2.00 Price €29.99
Universal Magnetic Project Mat Plate 30cmx25cm Practical magnetic plate for repair the magnetic screws needed for Apple, Samsung and other mobile phones.The screw position prevents the occurrence of errors, offers an excellent way to store and organize screws or other small metal objects.High quality dry erase surface.It can be used repeatedly, with slate pencil to write, convenient to record and memory to facilitate.Universal Magnetic Project Mat Plate 30cmx25cm features:Material: siliconeMade of high quality silicone, solid and durable, easy to clean with a dry cloth.Color: Black and white (as shown in the pictures)Mat Thickness: 0.8mmSize (L * W): 30 * 25cm Code H0180 Available Regular price €7.29 -€3.30 Price €3.99
UNO R3 Atmega 328P + CNC Shield + 4x A4988 Stepstick Contented:- 1x UNO R3 Atmega 328P 16U2 Compatible with Arduino- 1x CNC Shield V3- 4x A4988 Drivers- 4x Heatsinks for A4988- USB Cable- Jumpers Code I0002 Available Regular price €20.30 --€1.84 Price €22.14
UNO R3 Starter Initiation Kit for Arduino Starter kit with the UNO R3 module sensors in a box for Arduino.Compatible with ArduinoIt allows to build various projects of various complexity, from the easiest ... to the most complicatedThe elements are placed in the box to keep everything in order. Characteristic: It includes the following module references: - 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module- 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780- 1x Prototype Protoboard MB-102 830 points Arduino - 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16- 1x USBASP Programmer Adapter Cable Atmega8 Atmega128 AVR - 5x Push Switch Button B3F Omron Yellow Key- 1x Linear 5K Potentiometer OHM kΩ Code B0033 Available Regular price €42.62 -€1.13 Price €41.49
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Regular price €26.50 -€2.00 Price €24.50
USB Type B Female 2.0 Connector Adapter with PCB The USB (Universal Serial Bus), is an industrial standard bus that defines the cables, connectors and protocols used in a bus to connect , communicate and supply power between computers, peripherals and electronic devices. This female type B USB connector adapter soldered on a PCB board is ideal for use in your projects. It has connection points where you can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points. USB Type B Female 2.0 Connector Adapter with PCB features:- Connector type: USB Type B Female, - Internal color: White, - Nominal voltage: 30v DC, - Maximum current: 1A DC, - Insulation resistance: 1000Mohm, - Operating temperature: -25ºC to + 85ºC, Code M0193 Available Regular price €1.00 -€0.10 Price €0.90
VARTA CR123A lithium battery Varta CR123A 3V lithium photography battery. Code PP121 Available Regular price €3.49 -€0.20 Price €3.29
VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features: > - Input voltage 2.5V-3V - Operating power 60mW / 15fps VGA YUV - Resolution VGA 640x480 pixels (30fps) - Maximum frame rate 30fps VGA - Flicker 50Hz / 60Hz automatic detection - Lens size 1/6 " - Angle of view 25 ° - Sensitivity 1.3V / (lux- seg) - SCCB (Serial Camera Control Bus) interface - Output format · 8 Bits - YUV / YCbCr 4: 2: 2 - RGB 565/555/444 - GRB 4: 2: 2 - RAW RGB data - High sensitivity Light operation - Automatic adjustment - Color level saturation - Edge enhancement - Noise level Code M0103 Available Regular price €5.79 -€1.00 Price €4.79
VNH3SP30 Stepper Motor Driver Module 30A Driver capable of handling up to two high consumption motors.We can weld 5mm screw terminals (not included), making it easy to connect other gauge cables. Code R0010 Last items in stock Regular price €15.58 -€2.50 Price €13.08
Voice Recording and Reproduction Module ISD1820 This module works under the characteristics of the integrated ISD1820 and allows you to make recordings of multiple messages or the reproduction thereof, it performs a non-volatile storage. Voice Recording and Reproduction Module ISD1820 features: - Working voltage: 2.4 - 5.5 VDC- Model: I073103- Voice Recorder Chip ISD1820- Automatic ignition mode dwoncording duration: 8-20 seconds- Manual or Automatic Control with an MCU- With internal audio amplifier, this board can drive 8 ohm 0.5W speaker directly- Includes a microphone on board to record directly- The sampling frequency and duration can be different if a single module resistance is changed- High quality, restored natural voice, can be used as a speaker module Code M0157 Available Regular price €6.95 -€1.96 Price €4.99
Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 features:- Measuring range: from 3.5 VDC to 30 VDC ±% 1- Operating current: <30mA- Measuring refresh time: 500ms- Dimensions: 54mm x24mm x15mm- Cable length: 85 mm- Color: Black- Display: Blue LED- Operating temperature: -10ºC to 65ºC Code M0038 ✗ Out-of-Stock Regular price €3.99 -€1.00 Price €2.99
Voltmeter LED Waterproof Digital Display DC Green 3.5V 30V DC 0.56 Voltmeter LED Waterproof Digital Display DC Green 3.5V 30V DC 0.56 features:- Measuring range: from 3.5 VDC to 30 VDC ±% 1- Operating current: <30mA- Measuring refresh time: 500ms- Dimensions: 54mm x24mm x15mm- Cable length: 85 mm- Color: Black- Display: Green LED- Operating temperature: -10ºC to 65ºC Code M0037 ✗ Out-of-Stock Regular price €3.99 -€1.00 Price €2.99
W1209 DC 12V Thermostat + Transparent Box Temperature Controller W1209 DC 12V Thermostat + Transparent Box Temperature Controller features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50-110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measure accuracy: 0.1 ° C - Refresh rate: 0.5s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Output power: 10A relay - Probe sensor: NTC (10K 0.5%) Waterproof Sensor - Environmental requirements: -10 ~ 60 ° c Humidity 20% -85% - Dimensions: 48 x 40mm Code M0106 Available Regular price €6.44 -€0.08 Price €6.35
Waterproof RS232 IP66 HD Camera IP66 Waterproof Infrared HD digital camera. Waterproof RS232 IP66 HD Camera features: - Supply voltage: 5 VDC, - RS232 serial connection, - Protection index: IP66, - Includes a female SUB-D9 connector, - Latest digital signal processing technology, - Image stabilization technology, - Automatic adaptation to digital noise reduction, - HD PTC01 color infrared camera, - Color: silver. Code SH001 Last items in stock Regular price €52.99 -10% Price €47.69
Welding kit for beginners - Christmas Tree with flashing LEDs Learn how to weld in the most fun and useful way with this luminous Christmas tree. Follow our practical and simple guide step by step, and decorate your home with this flashing Christmas tree. Soldering is an essential technique in electronics and what better way to learn than with this specially prepared kit. Includes soldering iron, tin, pliers, desoldering iron, sponge, support and tree kit. Soldering kit comes in a practical and convenient case box. Code K0325 Backorder Regular price €40.71 -€11.13 Price €29.58
Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips features: - Pyrography type pencil, with 6 replacement tips with different shapes and thicknesses. Ideal for carpentry and joinery- Can be used on different materials, the most common are wood, leather and rubber, but can also be used with other materials- Number of nozzles: 6 units- Power: 30W- Voltage: 220-240V- Caution: do not touch the tip of the pyrograph while it is hot. Change the mouthpiece with tweezers or wait for it to cool- Certifications CE, RoHS, LVD Code H0105 Available Regular price €12.99 -€3.04 Price €9.95
XL4015 DC-DC 5A Digital Step-down LED Converter with Voltmeter, Ammeter and USB Output This Step-down voltage converter includes 5 functions in one module. It can be used as a voltmeter, ammeter and measurements can be recovered through its USB port. The output voltage and voltage can be adjusted thanks to two potentiometers present in the module. It has an efficiency Very high, it has a display screen for voltage, current and two buttons to configure what you want to see. Characteristic: - Voltage of input: 5.5 - 36 V - Output voltage: 1.25-32 V continuously adjustable - Output current: 4.5 A (Max 5A for a short time) adjustable with potentiometer, - Power output: 75 W maximum (recommended to use 50 W, large pressure difference, please reduce power) - Operating temperature: -40 ° C - + 150 ° C Code A0077 Available Regular price €7.89 -€1.00 Price €6.89
Yellow 3D-pen for ABS / PLA filaments Yellow 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Yellow 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: yellow, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0152 Last items in stock Regular price €23.99 -€2.00 Price €21.99
ZD-8906 Digital Soldering Station 30W ZD-8906 Digital Soldering Station 30W features: - For general electronics and repairs- High potency ceramic resistance that provides a fast recovery of temperature- Soldering iron holder- Heating element for soldering iron: 30W- Resistance: Ceramic- Temperature: 160 °C - 550 °C- Power: 220-240Vac- Certifications CE, RoHS, LVD Code H0103 Last items in stock Regular price €46.90 -€6.91 Price €39.99