Power Supplies

Solar panel DIY 6V 1.1W 200mA features:
- DIY Mobile Photovoltaic Charger
- Working Voltage: 6V
- Output Power: 1.1W
- Working current: max. 200 mA
- Product size: 112x 84x3 mm

Battery Compartment 9V 6LF22 Power cable features:
- Cable 17cm long
- DC connector 5.5 / 2.5mm
- Dimensions 54x 30x 20mm
- Batteries 6LR61, 6LF22, X22 or compatible
- It has 3 holes for anchoring to plate or chassis

Battery Holder Button 3V CR2032 PCB CR2032 PCB features:
- Battery compartment for PCB printed circuit
- Quantity: 1 unit

6V 4.5W DIY Solar Panel features:
- Mobile DIY System Photovoltaic Charger Cell
-Work Voltage: 6V
-Power output: 4.5W
-Working current: 0-750mA
-Product size: 165x165x3 mm

DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA.

Instruction: - The drawing of the polarities is not correct, it is wrong
- Put the batteries in parallel Characteristic: - Cable 15cm long
- Measures 74x42x 20mm
- Weight: 10 gr. (Approx.)
- Stack length max 67mm

Solar panel DIY 6V 1W features:
- Mobile DIY Solar System Photovoltaic Charger Cell
- Working voltage: 6V
- Output power: 1W
- Working current: 0-200 mA
- Product size: 110x60x3 mm

Ideal to power your Arduino board through the power input.
Adapter Battery 9V 6F22 Jack Connector DC features:
- Cable 7cm long
- Battery connector 9V, 6F22
- Male connector DC 5.5 / 2.5

Suitable for a small solar power system, etc.
12V 1.5W Do-it-yourself Mobile Solar Panel Photovoltaic Charger Cell features:

- Working voltage: 12V
- Output power: 1.5W
- Product size: 115x 85x 3 mm
Applications:
- Charge cell phones
- Home lighting
- DIY solar powered toys

Includes a switch to output the voltage built into the case itself.
It has a cover for protect the batteries.
The cover has perforation in case you want to secure it with a screw (not included).
Characteristic:
- Cable 12cm long
- Measures 70x 65x 18mm
- Battery length max 50mm
- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7)

Suitable for a small solar power system, etc.
6V 2W Solar Panel Do-it-yourself Mobile Photovoltaic Charger Cell features:

- Working voltage: 6V
- Output power: 2W
- Product size: 136x 110x 3 mm
Applications:
- Charge cell phones
- Home lighting
- DIY solar powered toys

Includes a switch to output the voltage built into the case itself.
It has a cover to protect the batteries.
The cover has perforation in case you want to secure it with a screw (not included).
Battery holder 2x AA Battery holder with switch features:

- Cable 15cm long
- Measurements 68x 32x 18mm
- Battery length max 50mm
- Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7)

Suitable for a small very low voltage solar power system.
Can be used as a power source current.
Characteristic:
- Working voltage: 0.5V
- Maximum output current: 200mA
- Output power: 0.14W
- Product size: 60x 30 mm

Ideal to power your Arduino board through the power input.
5x 9v Battery Adapter Connector 6F22 with Cable features:

- Cable 15cm long
- Battery connector 9V, 6F22

This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker.
Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features:
- Operating temperature: -40 ° C - 85 ° C
- Input voltage: 3.6 - 20 VDC
- Output voltage: 5 VDC
- Output current: 2A
- Conversion efficiency: 95%
- Size: 30x25x117 mm

Characteristic: - Button cell battery
- For 20mm diameter battery type CR2032
- ON / OFF switch
- Dimension: 50mm (L) x 23mm (W) x 6mm (D)

Solar panel DIY 6V 0.6W features:
- Mobile DIY Solar System Photovoltaic Charger Cell
- Working voltage: 6V
- Output power: 0.6W
- Working current: 0-200 mA
- Product size: 90x60x3 mm
- Includes soldered power cables.

4x AA 6V battery holder with DC connector features:
- Cable 12cm long
- Measurements 62x56x 16mm
- Battery length max 50mm
- Compatible batteries ( LR06, R06, MN1500, AM3, UM3, HP7)

3.7V - 2A solar panel controller, charging, discharging lithium battery with lighting control with output from 2.5 V to 4.2 V. Integrate PWM suspension float.
Characteristic:
- Charging current: 2A
- Compatible battery type: Li-ion
- Type: 3.7V single cell lithium battery solar controller
- PWM suspension float with integrated maintenance charge. - Avoid overcharging the lithium battery.
- Battery type included: None
- Charging voltage output limit: 4.2V
- Low voltage drip charging of the battery: 2.5V
- Over discharge voltage: 2.8V
Order of use:
1 ) LED lights connected to "+ OUT", correspond to positive and negative.

Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame.

Battery holder 4x AA 6V LR06 features:
- Cable 13cm long
- Measurements 62x56x 16mm
- Battery length max 50mm
- Compatible batteries ( LR06, R06, MN1500, AM3, UM3, HP7)

The solar power management module with the CN3065 chip is ideal for IoT (Internet of Things) projects with renewable energy. Compared to the previous version of the module, improvements have been made to the energy management of the connected battery.

Characteristic: - Cable 13cm long
- Measurements 49x 52x 13mm
- Battery length max 44mm
- Compatible batteries (LR03, 24A, R03, RX03, MN2400, AM4, UM4)

The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output.

Ideal to power your Arduino board.
Battery Holder 6x AA LR06 features:
- Cable 12cm long,
- Measures 90x 55x 15mm,
- Max 50mm pile length,
- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7).

Waveshare solar panel with working voltage of 18V and output power of 10W and maximum working current of 570 mA. Includes polysilicon cells. The panel is placed in a rigid, high-strength frame.

Ideal to power your Arduino board.
Battery Holder 6x AA with DC Connector 9V LR06 features:
- Cable 12cm long,
- Measures 90x 55x 15mm,
- Max 50mm pile length,
- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7).

Solar power manager (B), Built-in 10000mAh rechargeable Li-Po battery, Multiple protection circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output.

Characteristic: - Cable 15cm long
- Measurements 74x21x 19mm
- Weight: 8 gr. (approx.)
- Stack length max 67mm

Solar Power Manager (C), Supports 3x 18650 Batteries, Multi Protection Circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output.    

4x 18650 3.7V Parallel Lithium Battery features:
- Cable 10cm long
- Measures 80x76x 20mm
- Stack length max 67mm

Battery Holder R6 LR06 4+4 8x AA 12V features:
- Cable 14cm long
- Measures 58x 32x 30mm
- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7)

Battery holder 2x AA 3V features:
- Cable 15cm long
- Measurements 59x 33x 16mm
- Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7)

Lithium Battery Holder Button 3V CR1220 THT PCB features:
- Material:
    - Contact: Phosphor Bronze
- Electric:
    - Type: THT
    - Contact Resistance: 30 Milliohms Max
    - Insulation Resistance: 1000 Mega Ohms Min
    - Dielectric Voltage: 500V AC one sec level
    - Operating Temperature: -25 „ƒ - 85 „ƒ
- Suitable for Computer Memory, Power transfer, Communications Power System, PC Application, Armamentarium, Motherboard

Lithium Battery Holder Button 3V CR1220 SMD PCB features:
- Diameter: 15 mm
- Thickness: 4 mm
- Type: SMD
- Use it for CR1220 battery
- Suitable for Computer Memory, Power transfer, Communications Power System, PC Application, Armamentarium, Motherboard

Weight: 12.7g
Box size: 62 * 25 * 10 mm

Base of two 18650 batteries to solder on PCB. Characteristic: - Measurements 78x 40x 21mm
- Weight: 10 gr . (approx.)
- Stack length max 67mm

18650 battery base for soldering to PCB. Characteristic: - Measurements 78x 20x 21mm
- Weight: 10 gr. ( approx.)
- Stack length max 67mm

Battery holder for 18650 batteries connected in series.