Raspberry Pi

White Housing for Raspberry Pi 2, Pi3, Model B, B+ features:
- White shell case
- Housing for Raspberry Pi2 and Pi3, B and B +
- The color white
- Made of ABS
- Dimension: 95x 62x 26mm.

Black Housing for Raspberry Pi 2, 3, Model B, B+ features:
- Black Case Shell Box
- Housing for Raspberry Pi2, Pi3, B and B +
- Color: Black
- Made of ABS
- Dimension: 95x 62x 26mm

Transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Transparent color
- Made of ABS
- Dimension: 95x 62x 26mm

Kit 3x Aluminium Dissipative Adhesive features:
- For Raspberry Pi 2 and Pi 3, B and B +
- Heatsink includes thermal sticker
- 1x aluminum heatsink for the microprocessor
- Dimension: 14x14x5mm
- 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator
- Dimension 9x9x4mm
- Quantity: 3 units

For Raspberry Pi 2 and Pi 3, B and B +.
The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm
- Quantity: 1 unit

Flat Cable GPIO 40 Pins M/F features:
- For Raspberry Pi 2 and Pi 3, B and B +
- Total length 20cm
- Quantity: 1 unit

Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) features:
-Length: 25cm
-Quantity: 1 unit
-Female connectors at both ends
-High quality and good working condition
-easy to install and use

50cm HDMI V1.3 Male to Raspberry PI 1080P Gold Silver features:
- For Raspberry Pi 2 and Pi 3, B and B +
- HDMI V1.3b cable and full 1080P (category 2) resolution
- Type A male at both ends
- High quality gold shielded connectors
- Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality
- Refresh rates up to 120Hz
- Length: 50cm
- Quantity: 1 unit

DS3231 Precision RTC Real Time Clock Module AVR ARM features:
- Can be used in projects of Arduino, Raspberry Pi, PIC, AVR
- Function compatible with the DS 3231
- Power supply voltage: +2.3 V to +5.5 V
- Temperature range: -40 ° C to + 85 ° C
- Low energy consumption
- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation
- Two alarm calendar
- Interface: I2C

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:
> - Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation - Edge enhancement
- Noise level

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.
AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out). The interface is very easy to use because all operations are controlled by the internal DRAM memory controller. VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features:
- Input voltage: 2.5V-3V
- Controller: AL422B FIFO buffer
- Operating power: 60mW / 15fps VGA YUV
- VGA resolution: 640x480 pixels (30fps),
- Maximum frame rate: 30fps VGA
- Flicker: 50Hz / 60Hz auto detection
- Lens size: 1/6 "
- Angle of view: 25 ° - Sensitivity: 1.3V / (lux- sec)
- SCCB (Serial Camera Control Bus) interface
- Output format: 8 Bits
- YUV />

Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features:
- Shield module for Raspberry Pi 2 and Pi 3, B and B +

T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin features:
- Shield expansion module for Raspberry Pi 2 and Pi 3, B and B +
- Dimension: 6 x 7.3x 1.9mm

T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features:
- Shield to connect with breadboard
- Dimension: 6 x 7.3x 1.9mm
- Flat cable female / female 40 pins
- Total length: 25cm
- Quantity:
1x shield
1x flat cable

Mobile Charger 5V 3A 3100mA Micro USB 15W features:
- Raspberry PI Red Power Supply
- Charger for Raspberry Pi 2 and Pi 3, B and B +
- External 220V a 5V / 3.1A (3100mA) 15W
- Plug type: Micro USB
- Additional USB A socket
- AC-DC adapter - 100-265V AC input, 50-60Hz - Output 5V / 3.1A (3100mA) 15W
- Cable length: 130cm
- RoHs, CE - High Quality

2 Channel Relay Module 5V 10A for Arduino features:
- 5V relay module with 2 optocoupled channels
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- LED indicator: For each channel
- Dimensions: 40x 50mm

Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features:
- Interface type: USB
- Supports IEEE 802.11e draft 802.11n
- Supports USB 2.0, compatible with USB 1.1 and 1.2
- Support systems:
- Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux
- Operating distance: 91 meters indoors, 275 meters in open space
- Transfer rate: 150Mbps (downlink) and 150Mbps (uplink)
- Works with old Wireless-G and Wireless-B networks
- WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM
- Frequency range: 2.4 to 2.4835 GHz
- Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment
- Transmission mode: DSSS

This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included.
The module offers a set of mini jumpers to configure the GPIO.

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. 

Kingston Class 10 MicroSD 8GB Memory Card features:
- SDHC Class 10 UHS-I (SDC10G2 / 8GBSP) for Raspberry
- Capacity: 8Gb
- Class: 10 - MicroSD dimensions 11mm x 15mm x 1mm
- FAT32 format
- Service temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3V

Toshiba Class 10 16GB MicroSD Memory Card features:
- Capacity 16GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3

Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: USB A, without cable
- Indicator of operation: LED diode

Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: micro USB
- Cable length 85cm

The Raspberry Pi 3 Model B+ is the penultimate product in the Raspberry Pi 3 range. It is the significant evolution in board performance compared to Raspberry Pi 3 B with the increase in processor frequency from 1.2 GHz to 1.4 GHz. Compared to serial 2 the board offers standard 802.11 b-g-n and bluetooth BLE 4.1 connectivity.

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case 

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. Black Box for Raspberry Pi features:
- Case size: 94x63.5x30mm
- Does not include Raspberry Pi

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Characteristic: 1 cover sink:
- Dimensions: 13x12x5mm
1 blue aluminum sink:
- Dimensions: 9x9x12mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm 1 flat metal sink gold color:
- Dimensions: 12x12x1mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm
1 flat gold metal sink:
- Dimensions: 12x12x1mm
1 green aluminum sink:
- Dimensions: 19x19x8mm

- Caja Case Shell Box
- Carcasa para Raspberry Pi 2 and Pi 3, B and B+
- Color transparente
- Dimensión: 89x70x25mm

Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Color transparent black - Dimension: 89x70x25mm

Transparent green housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Transparent green color - Dimension: 89x70x25mm

Clear blue housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Transparent blue color - Dimension: 89x70x25mm

Ethernet Patchcord UTP 5e 1m features:
- For Raspberry Pi 2 and Pi 3, B and B +
- HDMI V1.3b cable and full 1080P (category 2) resolution
- Type A male at both ends
- High quality gold shielded connectors
- Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality
- Refresh rates up to 120Hz
- Length: 50cm
- Quantity: 1 unit

SNES Controller / Joypad / USB Gamepad / Super SNES Controller
Classic Super SNES USB Controller supports the operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond,
Arcade, Nintendo, Raspberry pi and Model 2B pi emulator, Retro Pi OS
The SNES controller works with any emulator you want to download and use.
The Google SNES emulator, then the same for ROMs (for example: Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.)
Super SNES USB 1.5m controller features:

- USB SNES controller with standard USB 2.0 port,
- Actual cable length: 1.5 meters (59 inches),
- Works very well with the Raspberry emulation,
- Weight: 200g.

Gray Patchcord UTP CAT5E Ethernet cable 5m length with RJ45 connectors.
5m UTP5 Ethernet patch cable features:

- Connector: RJ45,
- Data transmission at speeds up to 100 Mbps,
- Frequencies: up to 100 MHz,
- Cable length: 5m,
- Cable type: UTP CAT5E 4x2x26AWG EIA / TIA 568B,
- Color: gray.
Carries its RoHS certificate .

The Ethernet Patchcord UTP 1m male A cable. Perfect for Raspberry Pi 2 and Pi 3, B and B+. ROHS certified

The Raspberry Pi 3 Model A + extends the Raspberry Pi 3 range to the A + board format.

• - Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit 1.4 GHz SoC
• - 512MB LPDDR2 SDRAM
• - 2.4GHz and 5GHz IEEE 802.11.b / g / n / ac Wireless LAN, Bluetooth 4.2 / BLE
• - Extended 40-pin GPIO header
• - HDMI full size
• - Individual USB 2.0 ports
• - CSI camera port to connect a Raspberry Pi camera module
• - DSI display port to connect a Raspberry Pi Touch display
• - 4-pole stereo output and composite video port.
• - Micro SD port for charging your operating system and storing data.
• - 5V / 2.5A direct current input. Hardware Specifications:

300cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 300cm
- Quantity: 1 unit

500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 500cm
- Quantity: 1 unit

32GB Class 10 MicroSD memory card with adapter features:
- Capacity 32GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

64GB Class 10 MicroSD memory card with adapter features:
- 64GB capacity
- Class 10
- MicroSD dimensions 11mm x 15mm x 1mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

Read speed: up to 100 MB / s
5 years warranty
Shock resistant
Waterproof
Use with cameras, mobile phones Toshiba Class 10 MicroSD 16GB Memory Card with adapter features:
- Capacity 16GB
- Class 10 UHS-1 U1
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3

Super SNES Classic Controller Super SNES USB Controller is compatible with operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond, arcade emulator, nintendo emulator, Raspberry pi and pi Model 2B, Retro Pi OS The SNES controller works with any emulator you want to download and use (Google SNES emulator, then the same for ROMs e.g. Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.).

The Starter kit does not contain Raspberry PI. The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

The Raspberry Pi 3 Model B is the third generation product in the Raspberry Pi range. The module was revolutionary for introducing the integrated WiFi and bluetooth connection which is still impressive for its quality. In addition, it introduced a processor upgrade to 1.2 GHz.

Raspberry Pi 3 B + module and 16GB micro SD card preloaded with NOOBS operating system.

• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
• 1GB LPDDR2 SDRAM
• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN
• Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
• Extended 40-pin GPIO header
• Full-size HDMI 4 USB 2.0 ports
• CSI camera port for connecting a Raspberry Pi camera
• DSI display port for connecting a Raspberry Pi touchscreen display
• 4-pole stereo output and composite video port Micro SD port for loading your operating system and storing data
• 5V/2.5A DC power input Power-over-Ethernet (PoE) support (requires separate PoE HAT) 

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Característica: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @>

Attention: You need to download newest image "RetroPie 4.4" if you use this NESPi Case + with Raspberry Pi 3B +: https://retropie.org.uk/download/ Safe Shutdown and Safe Reset NESPi Case can have SAFE SHUTDOWN and SAFE RESET functions. (Scripts is necessary). Safe shutdown scripts: https://github.com/RetroFlag/>

This set will make your project look like take out of 80s! Box and two controllers imitate a game console only for 25 EUR. Do you miss old times of Nintendo? You won´t anymore with this great set. It is perfect for a gift as well. Check out product characteristics for further information

HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video.
Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity.
Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection.
Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features:
High-quality images
High data capacity
Fixed 8 megapixel focus (includes focus adjustment tool)
Compatible with 1080p, 720p60 and VGA90
Sony IMX219PQ CMOS image sensor
15-pin ribbon cable

Raspberry Pi HD Pi NoIR V2 camera board Raspberry Pi HD Pi NoIR camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. The Pi NoIR (without infrared) is the same as the standard camera module but without an infrared filter. Therefore, it is excellent for photography and video in the dark.
The module uses Sony's IMX219PQ image sensor that offers high-speed, high-sensitivity video images.
The Pi NoIR module offers contamination from Reduced image such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi NoIR Camera Board, Sony IMX219 8 Megapixel Sensor features:
and benefits: No infrared filter
High quality images

The screen is intended for use with a 3.5-inch acrylic case, reference in our store: RA018 Raspberry Pi Shield MPI35 3.5 inch TFT LCD screen 240x320 features:
- XT2046 touch controller
- Resistive touch screen
- Current consumption: 250mA (unconfirmed)
- Screen type: TFT LCD screen
- Color: 16 bits
- Display backlight: White LED
- Characters x Lines: 480x320
- Communication format: Parallel
- Form factor: 3.5 "Screen size
- Pinhole: 2.54 mm

Official Raspberry Pi keyboard suitable for all Raspberry Pi products. Comfortable ergonomic design.

Official Raspberry Pi Mouse with wheel. - compatible with all Raspberry Pi products - with its comfortable ergonomic design and its colorful display, it is designed to complement official products existing.
Official Raspberry Pi Mouse, Red/White, Wired features:
- High quality 3 button optical mouse with scroll wheel - Ergonomic design for convenience of use - Compatible with all Raspberry Pi products - USB-A Plug and Play connector

Official Raspberry Pi 4 Model B Cover, Plastic, Red/White features:
- Case Case Shell Box
- Housing for Raspberry Pi 4 B - Color red / white - Dimension: 92x70x26mm

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Case does not affect the Wifi signal. Aluminum case for Raspberry Pi 4 model B features:
- aluminum alloy case x 1 pcs. - mounting screw x 1 set - thermal pad x 1 set - screwdriver x 1 pcs. Note: Raspberry Pi board is not included.

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box for Raspberry Pi 4 model B features:
- clear acrylic case x 1 pcs. - mounting screw x 1 set Note: Raspberry Pi board, LCD screen is not included.

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box with fan for Raspberry Pi 4 model B features:
- clear acrylic case x 1 You. - 5Vdc fan - mounting screw x 1 set Note: The Raspberry Pi board is not included.

16GB Class 10 MicroSD memory card with adapter features:
- Capacity 16GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

128GB Class 10 MicroSD memory card with adapter features:
- Capacity 128GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

Pimeroni Unicorn HAT is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. It is featured with a matrix of 64 RGB LEDs powered directly through the Pi board. The applications of the HAT spread from just a simple games in the classroom up to color indications in your robot. All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout

Pimeroni Display-O-Tron is one of the most popular and at the same time easiest to use HATs in Pimoroni offering. It is featured with 16x3 character LCD supporting a complete ASCII character set. The shield is powered directly through the Pi board. The board comes with multiple capactive touch pads on top of that. All functions of the shield are accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimoroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout

Pimeroni Unicorn HAT HD is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. Compared to the Unicorn HAT it is equiped with twice as many LEDs in a row and a column giving a matrix of 256 LEDS! All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout

The Pimeroni Automation HAT (PIM213) is a great solution for home automation. The controller board includes relays, powered outputs and buffered inputs up to 24V as well as analog channels. Set of LEDs showing the current state of each of the channels. So if you need to get a light automation or garden sprinkling phasing set in place, this is the board just for you

Can't stand to run out of pins in your Raspberry Pi? You have a cool new accessory but there's no way to plug it in? If you answered yes to any of the above, then this pHAT could be just for you. This piece has 6 sets of 40 GPIOS - one for your Pi and the rest (5) for your collection of HATs that you might want to plug in at the same time. Use it for a specific project or just to play with several HATs at once.  

16 servo motors with one board seems impossible? With this board not only it isn´t impossible, but it even seems easy. Additionally, you won´t need to sacrifice any of your valuable GPIOs as the HAT connects directly via I2C. Additionally, you have a serial terminal connection at your disposal.

You can supply the power to the board through your Pi or directly if you are going for larger servos and would need a separate source of power. Simply scrap a small blob of solder on the isolation jumper.

You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following.

The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects.

QWIIC is a connection standard developed by Sparkfun enabling a quick an easy connection of peripherals without a need to solder pins, without any mismatches due to polarized connector. And on top of that you can "daisy chain" them! 

This hat pretty much opens the whole QWIIC universe in front of your Pi. It features 4 QWIIC ports all on the same I2C bus (GND, 3.3V, SDA, and SCL).

A universal  2x20 GPIO makes it compatible with all Raspberry Pi boards, as well as Google Coral and Jetson Nano.

Note:  For a secure connection in some applications, you'll need to add a pair of 1x20 stackable headers to extend the pins to your cart.

Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish

Sense HAT is your absolute classic used for a well-known and popular Astro Pi projects. It features set of sensors (Pressure, humidity, IMU and temperature) and a great 8x8 LED screen. It is a full set for your Raspberry - you can both measure your projects environment, display it on the screen as well as manouver and input data with joystick and buttons included on the HAT.

SparkFun Hamburger speaker is a high quality speaker in a small form and with even smaller price. You wouldn't believe you can get a quality product for less than 7€, right? Well, we couldn't believe that as well, but SparkFun makes that possible.

The Qwiic HAT is an absolute basic of Qwiic system for Raspberry. It enables a quick and efficient connection of an sensor to your Raspberry over I2C bus (GND, 3.3 V, SDA and SCL). As Qwiic enables daisy chaining of components, you can pretty much install as many sensors on the Qwiic HAT as you want. On top of that it fits perfectly Pi Tin enclosure from SparkFun enabling connection while in case.

This little board is simply a I2C board to Qwiic converter. It pretty much enables any device with I2C connectors to work with Qwiic system. It has two Qwiic ports - both of them served with the same I2C bus. You simply stick the board on your I2C board and get additional two Qwiic ports. It is as easy as it sounds

It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328.

SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables!

The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA.

SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables!

The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA.

The kit includes 20 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes.

The kit includes 30 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes.