GPS Mini Station NEO-6M-0-001 with EEPROM SMA IPEX Ports It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the start 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna (not included ): 18x18 mm - Size: 22x30x13 mm Code M0070 ✗ Out-of-Stock Price €14.90
GPS Module GY-GPS6MV2 NEO6MV2 EEPROM with Antenna It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the beginning 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna 18x18 mm - Size: 22x30x13 mm Code M0071 ✗ Out-of-Stock Price €15.90
SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output The DC-DC 25A solid state relay has a 3-32VDC input and a 6-60VDC output. It has a maximum load capacity of 25A. It has a long operating life and high reliability, a compact size. This relay switches very quickly. Fotek SSR-25 DD 25A DC-DC Solid State Relay 5V-60VDC output Code RL017 Available Price €7.99
Solid State Relay SSR-25 DA 12A DC-AC Output 24V-380VAC The DC-AC 12A solid state relay has a 3-32VDC input and a 24-380VAC output. It has a maximum load capacity of 12A. It has a long operating life and high reliability, a compact size. This relay switches very quickly. Solid State Relay SSR-25 DA 12A DC-AC Output 24V-380VAC Code RL018 Available Price €7.99
Module Relay 12V Light sensor LDR This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold. The optical isolation relay effectively protects the chip and ensures better performance. This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1 - Supply voltage: 12VDC - Output load capacity: 250V 10A AC / 30V 10A DC - Relay activation current: & gt; 100mA - Insulation: Yes - Indicator LED: Green and Red - PCB size: 5x2.6 cm / 1.96x1.02 " Code RL019 Available Price €3.49
Voice Recording and Reproduction Module ISD1820 This module works under the characteristics of the integrated ISD1820 and allows you to make recordings of multiple messages or the reproduction thereof, it performs a non-volatile storage. Voice Recording and Reproduction Module ISD1820 features: - Working voltage: 2.4 - 5.5 VDC- Model: I073103- Voice Recorder Chip ISD1820- Automatic ignition mode dwoncording duration: 8-20 seconds- Manual or Automatic Control with an MCU- With internal audio amplifier, this board can drive 8 ohm 0.5W speaker directly- Includes a microphone on board to record directly- The sampling frequency and duration can be different if a single module resistance is changed- High quality, restored natural voice, can be used as a speaker module Code M0157 Available Regular price €6.95 -€1.96 Price €4.99
Timer Relay Module FRM01 The multifunctional relay control module, FRM01, is designed for customers with different synchronization and control needs.The FRM01 is controlled by the STM8S003F3P6 microcontroller and has 18 different functions.Each function can be customized to meet customer needs in a variety of time and power control applications.The FRM01 is equipped with a high-quality power relay, a high-power voltage transistor, red and blue LED indicators, an LED display on a double-sided PCB board.The output of the board is driven by a high quality power relay capable of controlling the AC and DC loads. Timer Relay Module FRM01 features: - Operating voltage: 12 VDC- 4 buttons: SET, SWI, NUM +, NUM-- Operating temperature: -20 °C - + 60 °C Code M0159 Available Regular price €9.95 -€2.00 Price €7.95
Time Switch Module 12V NE555 Monostable Switch Delayed This module is a timed switch that allows you to program several types of applications such as lights. Time Switch Module 12V NE555 Monostable Switch Delayed features: Code M0160 Available Regular price €4.59 -€0.59 Price €4.00
BLE 4.0 UART Bluetooth Low Energy Module without Adapter This product is a Bluetooth module BLE 4.0 UART without adapter, low energy with serial transceiver.Logic level conversion circuit. No external level of 5V is needed to become a 3.3V level.The power input port is protected against the anti-circuit, to avoid the inverted accidental power plug, which leads to the module burnHM-10, Bluetooth module HM-11 series using IT chip CC2540 / 2541, configuration 256Kb space, supportIn commands.You can change the paper (master and slave mode) and the baud rate, the device name, the pairing of the password and other parameters, convenient and flexible. BLE 4.0 UART Bluetooth Low Energy Module without Adapter features: - Version AT-09 CC2541 Arduino Android IOS BLE- Serial transceiver Code W0087 Available Price €5.31
Buzzer PCB Active 5V Black This module is an active buzzer for Arduino and emits different sounds at various frequencies. It does not accept oscillation source, it only receives square waves for drive sound. Code M0162 Available Regular price €1.29 -€0.15 Price €1.14
Passive Buzzer PCB Long Blue This module is a passive buzzer, a low trigger level alarm for Arduino. It emits different sounds at various frequencies. The buzzer sounds when the I / O port input is low level. Code M0163 Available Price €1.29
Passive Buzzer 3-5V Low Level Trigger When the input port is low, the trio turns on. Then the doorbell comes on and a small red light comes on. It can be used as the external module for many types of circuits, such as MCUs. Passive Buzzer 3-5V Low Level Trigger features: - Operating voltage: 3.3-12 VDC - Current consumption: Code M0161 Available Price €1.35
Voice Module MP3 Player XY-V17B is a smart voice module, integrated IO segment trigger, control UART series, ONE_line control of a single serial bus, MP3 standard and other functions; Supports MP3, WAV format decoding, maximum storage capacity on 32G TF card, update audio files from TF memory card via USB data cable to connect computer. Voice Module MP3 Player features: - Support MP3, WAV decoder format. - Support sample rate ( KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48. - 24-bit DAC output, support 90dB dynamic range, support 85dB signal-to-noise ratio. - Fully compatible with FAT16 / FAT32 file system, 32G TF card with maximum support, 32G U disk support. Code M0164 Available Price €4.90
Wifi module adapter ESP12 ESP12E The adaptor for the well-known ESP-12 and ESP-12E module Code W0025 Available Price €0.90
Buzzer 5V Passive Buzzer 5V Passive 5 to 12V DC features: - Input voltage: 4V to 12V - Diameter: 17mm - Height: 7mm - f = 4kHz +/- 500 - Pin Separation: 10mm - Maximum Current: Code M0166 Available Price €0.59
Buzzer 5V Buzzer active 4 to 7 Vdc Buzzer alarm to convert electrical signals into acoustic in robotics devices and Arduino projects Buzzer 5V Buzzer active 4 to 7 Vdc features: - Input voltage: 4V to 7V, - Diameter: 12mm, - Height: 9.5mm, - Pin spacing: 7.6mm, - Maximum Current: & lt; 30mA, - Effect - continuous sound, - Sound intensity: 85dB at 10cm, - Operating temperature: -20ºC to + 70ºC, - Quantity: 1 unit Code M0170 Available Price €0.45
Mini vibration engine for Arduino and Raspberry Pi 5 VDC This mini vibration motor runs on 5 VDC and can be used for Arduino and Raspberry projects. It is a direct current motor. Mini vibration engine for Arduino and Raspberry Pi 5 VDC features: - Voltage: 5 VDC, - Current: 75mA, - Rotation speed: 1100 (rpm), - Efficiency: 80%, - Dimensions: 10x27mm. Code M0174 Available Price €1.00
NFC RFID round card 13.56 MHz Can be used in Access Control projects and Alarm, Arduino, Raspberry PI, PIC, AVR projects 10x NFC RFID round card 13.56 MHz features: - 32 bit unique code - Protocol: ISO14443 - Compatible with Mifare S50 Classic - Memory: 1kB EEPROM - Operating frequency: 13.56MHz - Communication speed: 106Kboud - Reading distance: 2.5-10CM - Reading time: 1-2MS - Working temperature: -20 ºC to 85 ºC - Number of uses 100,000 times - Data retention: 5 years - Material: PVC - Dimensions: Ø 25 x 0.8 mm - Quantity: 10 units of NFC 13.56MHz card Code M0177 Available Price €0.49
CJMCU-717 Series Data Logger This Openlog serial data module is an open source logger that works with a serial connection Simple and supports Micro SD cards up to 64GB. It can store or record huge amounts of serial data and act as a black box. It includes an ATMega328P chip with a high frequency of 16 MHz. All recorded data will be stored on the Micro SD card. Code M0181 Available Price €7.95
Low power Bluetooth / Multi-standard SensorTag CC2650STK TI The new SensorTag IoT kit invites you to realize your product idea connected to the cloud. The new SensorTag now includes 10 low-power MEMS sensors in a small red package. And it's expandable with DevPacks to make it easy to add your own sensors or actuators. Connect to the cloud with low-power Bluetooth and Get your sensor data online in 3 minutes. The SensorTag is ready to go right away with an iOS and Android app, no programming experience to get started. The new SensorTag is based on The CC2650 Wireless MCU, which offers 75% less power consumption than previous Bluetooth low energy products. This allows the SensorTag to run on batteries, and offers years of battery life with a single coin cell battery. Code W0088 Backorder Price €45.00
WTV020M01 mp3 voice module with 1 GB storage capacity Reprogrammable voice module with large storage capacity that can support the maximum 1GB SD card, and support audio files of WAV and ad4 format. Wtv020-sd module uses wtv020sd-20s Voice chip as master core, with MP3 control mode, one to one key control mode (control 3 voice groups or 5 voice groups), 2-wire serial port control mode and loop play mode after power on. Control mode is set by programming the voice chip, and can't change to another control mode during operation, what control mode do you need, just tell us, we can customize it for you. Code M0187 ✗ Out-of-Stock Price €5.20
Relay SPDT JQC-3FF 5VDC-1ZS Relay 5VDC SPDT 5VDC JQC-3FF for industrial applications, automation and process control and consumer electronics. Relay SPDT JQC-3FF 5VDC-1ZS features: - Coil voltage: 5 VDC,- Coil power: 360 mW,- Switching capability: - 10A @ 277 VAC - 12A @ 125 VAC- Operating time: between 5ms and 10ms,- Plastic sealed and flux proofed types available,- Environmental friendly product (RoHS compliant),- Working temperature: -40ºC to 70ºC,- Outline dimensions: 19.0 x 15.2 x 15.5 mm. Code RL020 Available Price €0.98
AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz) Signal generator including the AD9851 chip, it has two sinusoidal outputs and two square outputs. Code M0189 ✗ Out-of-Stock Price €15.90
Capacitive Touch Sensor Module TTP229 - 16 Touch Sensitive Pads This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project. Capacitive Touch Sensor Module TTP229 - 16 Touch Sensitive Pads Code M0190 Available Regular price €5.20 -€0.50 Price €4.70
DC voltage sensor 0-25v for Arduino Voltage Sensor Module 0.02445V ~ 25V. When the module is powered by 5V voltage detection It does not exceed 25V, and when the module is powered with 3.3V the voltage detection does not exceed 16.5V. 100% Compatible with Arduino. DC voltage sensor 0-25v for Arduino features: - Input voltage: 0-25 VDC - Voltage detection range: 0.02445V-25 VDC - Analog voltage resolution: 0.00489 V - DC input connector: cathode terminal connected to VCC, GND negative pole - Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the Arduino AD pins Code M0191 Available Price €1.59
LED matrix module 32x8 red MAX7219 SPI Voltage Sensor Module 0.02445V ~ 25V. When the module is powered by 5V the voltage detection does not exceed 25V, and when the module is powered with 3.3V the voltage detection does not exceed 16.5V. Arduino Compatible. Code M0192 Available Price €7.95
Mini Dongle Adapter Bluetooth USB V2.0 Windows XP/VISTA/7 Work with Bluetooth compliant devices including notebook, PDA, digital camera,printer and mobile phone.Mini Dongle Adapter Bluetooth USB V2.0 Windows XP/VISTA/7 features:- Bluetooth specification V2.0 - Supporting profiles: networking, dial-up, fax, LAN access and handset - Operation system Windows98, 98se, Me, 2000, XP, Vista, Windows7 - Receiving/sending range: 100m Code W0093 Available Price €3.90
USB Type B Female 2.0 Connector Adapter with PCB The USB (Universal Serial Bus), is an industrial standard bus that defines the cables, connectors and protocols used in a bus to connect , communicate and supply power between computers, peripherals and electronic devices. This female type B USB connector adapter soldered on a PCB board is ideal for use in your projects. It has connection points where you can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points. USB Type B Female 2.0 Connector Adapter with PCB features:- Connector type: USB Type B Female, - Internal color: White, - Nominal voltage: 30v DC, - Maximum current: 1A DC, - Insulation resistance: 1000Mohm, - Operating temperature: -25ºC to + 85ºC, Code M0193 Available Regular price €1.00 -€0.10 Price €0.90
Adapter 2.5mm female power jack with PCB The 2.5mm female jack connector is a connector to provide power to computers, LED TVs, routers, etc ... This 2.5mm female jack connector adapter soldered on a PCB board, is ideal for use in our projects. It has connection points where we can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points. Adapter 2.5mm female power jack with PCB features: - Connector type: 2.5mm female jack , - Color: black, - Nominal voltage: 12v DC, - Maximum current: 0.5A DC, - Insulation resistance: ‰ ¥ 100MΩ, - Operating temperature: -25ºC to + 85ºC, - Number of output pins: 3 - Pitch between output pins: 2.54mm. Code M0194 Available Price €0.89
TRRS jack adapter 3.5mm female audio with PCB board 3.5mm Audio Jack Breakout Headphone Video Audio MP3 Jack Module. This female jack connector adapter 3.5mm audio soldered on a PCB board, it is ideal to use in our projects. TRRS connectors are the audio-style connectors seen on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve", reflecting the fact that unlike a standard stereo connector, this one actually has three conductors and a ground. Code M0195 Available Price €0.95
Sonoff T0EU1C-TX Gang 86 Smart WiFi Wall Touch Switch WiFi Smart Wall Switch Sonoff T1 Gang 86 Smart WiFi RF APP Touch Control Wall Light Switch features:works with Amazon Alexa, Google Assistant DIY Smart Home, Nest via iPhone Android. Code W0089 Available Regular price €19.90 -€1.91 Price €17.99
SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino features: - GSM / GPRS SIM900 module-based development card / shield from Simcom - The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM Enhanced COM Commands). - The shield also has 12 GPIOs, 2 PWMs and a ADC of the SIM900 module (All of them are 2V8 logic) present on board. - Quad-Band 850/900/1800/1900 MHz: it would work on GSM networks in all countries of the world. - GPRS multi-slot class 10/8 - GPRS mobile station class B - Complies with GSM phase 2/2 + - Class 4 (2 W @> Code W0090 Available Regular price €25.99 -€3.50 Price €22.49
A6 GSM GPRS Four Band GPRS Module with MCU Antenna GSM A6 Four Band GPRS Module with MCU Antenna features: - GSM / GPRS module / development board / shield based on GPRS A6 - Supports GSM / Dual band GPRS, available for remote GPRS and SMS data transmission - Compact size and low current consumption - With energy saving technique, current consumption is as low as 5mA (sleep mode) - Communicates with the microcontroller through the UART port, supports the command including GSM 07.07, GSM 07.05 and Ai-Thinker Enhanced AT Commands - Working frequency: four-band network, 850 / 900/1800 / 1900MHz - Operating voltage: 4.8-9VDC (Supply power of the on-board regulator circuit for the A6 module) - Working current: 2A maximum - Current Sleep: 5mA Code W0062 Available Price €14.49
RFID PN532 NFC Module with Card and Pendant NFC module for Educational STEAM Kit. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Compatible with almost any microcontroller, Arduino, PIC, AVR. It can be used in Access Control projects and Alarm projects. RFID PN532 NFC Module with Card and Pendant features: - Support i2C, SPI, High Speed UART - Support RFID reading and writing - Support P2P communication with peers - Support NFC with phone - Work in NFC Mode or RFID reader/writer Mode - RFID reader/writer supports: - 1k, 4k, Ultralight, and DesFire cards ISO/> Code W0091 Available Price €9.99
Passive Buzzer 5V The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. Passive Buzzer 5V features: - Input voltage: 3V to 12V - Diameter: 12mm - Height: 7.5mm - Pin spacing: 6.5mm - Impedance: 16 Ohm - Working frequency: 2 to 5 KHz - Quantity: 1 unit Code M0196 Available Price €0.45
RFID PN532 NFC Module NFC module for Educational STEAM Kit. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Compatible with almost any microcontroller, Arduino, PIC, AVR. It can be used in Access Control projects and Alarm projects. RFID PN532 NFC Module features: - Based on the NXP PN532 chip, it can be used for non-contact communication of 13.56M.- Greater effective communication distance of 3 cm. Code W0092 Available Price €11.89
Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features: Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino / Code W0094 Available Price €9.95
Raspberry Pi v2 Oficial Camera - Sony IMX219 8 Megapixel Sensor HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity. Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features: High-quality images High data capacity Fixed 8 megapixel focus (includes focus adjustment tool) Compatible with 1080p, 720p60 and VGA90 Sony IMX219PQ CMOS image sensor 15-pin ribbon cable Code RA053 Last items in stock Price €29.89
Raspberry Pi v2 NoIR Oficial Camera - Sony IMX219 8 Megapixel Sensor Raspberry Pi HD Pi NoIR V2 camera board Raspberry Pi HD Pi NoIR camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. The Pi NoIR (without infrared) is the same as the standard camera module but without an infrared filter. Therefore, it is excellent for photography and video in the dark. The module uses Sony's IMX219PQ image sensor that offers high-speed, high-sensitivity video images. The Pi NoIR module offers contamination from Reduced image such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi NoIR Camera Board, Sony IMX219 8 Megapixel Sensor features: and benefits: No infrared filter High quality images Code RA054 Available Regular price €29.89 -€4.90 Price €24.99
Wemos D1 Mini Pro-16 Module + Esp8266 Wifi Series Wireless Antenna A Mini WIFI board ESP8266 contains 16MB flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. Wemos D1 Mini Pro-16 Module + Esp8266 Wifi Series Wireless Antenna features: - Compatible with Arduino, programming with the Arduino IDE, MicroPython, NodeMCU - Supply voltage: 5V - Logical levels: 3.3V - 16MB (128Mbit) flash - 11 pins of input / output - I2C / one-wire interface, LOLIN I2C port - 1 ADC (input: 0-3.2V) - built-in ceramic antenna - external antenna connector - Power switch - Includes external WIFI antenna with IPEX SMA adapter Wemos D1 Mini Pro-16 Module + Esp8266 Wifi Series Wireless Antenna features: of esp8266: - Supported protocols: 802.11 b / g / n - Network support: 2 , 4 GHz Code W0098 Available Price €10.90
TPA3116D2 2X50W Amplificador Doble Canal Audio amplifier for dual-channel loudspeakers. Supply voltage: 12-24 V. Maximum power: 2x50W. Power consumption: 3-5A. Code M0206 Last items in stock Regular price €13.59 -€2.00 Price €11.59
Amplifier Double Channel with Subwoofer TPA3116D2 2X50W +100W Amplifier for speakers, especially for cars, dual channel and with subwoofer. It operates at 12/24V and offers an output power of 50W for each channel + 100W subwoofer. Create your 2.1 speaker system with this amplifier. Code M0207 Available Regular price €14.95 -€2.00 Price €12.95
PWM Vibration Motor Module for Arduino and Raspberry Pi 5 VDC The module with high quality mobile phone vibration motor, the vibration effect is obvious and the vibration intensity of the motor can be controlled by PWM. It can be used for Arduino and Raspberry projects. It is a DC motor. Code M0208 Available Price €2.20
PAM8610 2X10W Dual Channel Amplifier The amplifier with high efficiency, in case of 12 V power supply can output 10 W + 10 W power. Code M0209 Available Price €3.55
Raspberry Pi 5 Megapixel Camera Module The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. Code RA073 Available Price €8.95
ESP32-CAM WiFi Camera + Bluetooth Module The ESP32-CAM is a camera module with the ESP32-S chip. It features an OV2640 camera, several GPIOs to connect peripherals, and microSD card slot. Code W0100 Available Price €9.45
Qwiic cable protoboard - 4 pin This cable is an essential element of the Qwiic ecosystem - it enables connection between the protoboard and any device with a Qwiic connector. With all the benefits of Qwiic at hand - no soldering required, easy 1-second hookup on click and dismantling. The cable is 150mm long. Wires are color coded according to scheme: Code SP020 Available Price €1.99
Qwiic cable 50mm It is a basic cable for connection of Qwiic elements featuresd with two JST 1mm connectors. The Qwiic cables are color coded and the connector is polarized making it easy and quick to connect the components. The cable is 50mm long Code SP040 Available Price €1.19
Qwiic cable 100mm It is a basic cable for connection of Qwiic elements featuresd with two JST 1mm connectors. The Qwiic cables are color coded and the connector is polarized making it easy and quick to connect the components. The cable is 100mm long Code SP022 Available Price €1.99
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401) - obsolete Ever needed a microphone for your project. This tiny little board will fulfill all your needs - it is not only mobile, but as well easy to connect. A low power, efficient, omnidirectional AMP401 microphone has an analog output. It works great for near and long range uses and is particularly suitable for a mobile projects given its extremely low energy consumption. You can use it in a range of applications - we can see it used in smartphones, cameras or electronic nannies. Code SP021