9V power module with 400mA step up output On/Off DM06 Step-up power supply module with fixed 9 VDC output accepting a maximum current of 400mA. Controlling the logic level of the signal sent on the EN pin, a module can be turned on / off. Works with frequency signals up to 1.5 MHz. Characteristic: - Input voltage range: 2.5 - 7 VDC, - Fixed output voltage: 9 VDC, - On / off mode pin EN: signal EN allowing this function to be performed, - Output accuracy: ± 0.1 V, - Output current: 150 - 400 mA, - No-load current: 0.2 mA, - Ripple at full load: Vpp & lt; 70mV, - DC-DC conversion quality: 89% - Operating temperatures: -40ºC - + 85ºC, - PCB size: 19x15 mm. Code A0094 Available Price €3.14
Integrated Circuit Supports DIP40 Width 17.78mm Integrated Circuit Supports DIP40 Width 17.78mm features: - Type: DIP DIL- Total number of pins: 40- Step between pins: 2.54 mm- Material: Polybutylene terephthalate- Length: 48.26 mm- Width: 17.78 mm- Temperature min .: -25 °C- Max temperature: +85 °C- RoHS compliant Code Z0004 Available Price €0.54
1N4007 Rectifier Diodes 1A 1000V DO-41 1N4007 Rectifier Diodes 1A 1000V DO-41 features:- Standard rectifier diode- Configuration: Simple- Reverse voltage: 1000V- Direct voltage drop: 1V- Direct direct current: 1A- Maximum overvoltage current: 30A- Encapsulated: DO-41- Operational tension: -65ºC to + 125ºC Code T0002 Available Price €0.04
Power Supply Transformer 220V AC/DC 2A 5V Power Supply Transformer 220V AC/DC 2A 5V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 5V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0102 Available Price €3.30
Potentiometer Cleaner - Spray 60ml Potentiometer Cleaner - Spray 60ml features: A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them. Code Q0030 ✗ Out-of-Stock Price €2.44
2 Double Side Prototype PCB Board 3x7cm 2 Double Side Prototype PCB Board 3x7cm features: -Thickness of PCB: 1.6mm-Material: high quality FR-4 glass fiber PCB-Presented and numbered on both sides-Top and bottom are identical copper layers-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm Code PB025 Available Price €0.57
Plastic Box Plastic Box features: - Transparent color- Dimensions: 22,80x16x5,90cm Code K0160 Available Price €3.96
M3x10 Nylon Hexagonal Splitter 20x M3x10 Nylon Hexagonal Splitter features: -PA66 material -Type: female / female -Thread size / M3 inner diameter -Body length: 10mm -Quantity: 20 units -Color: white Code H0084 Available Price €0.24
TRRS jack adapter 3.5mm female audio with PCB board 3.5mm Audio Jack Breakout Headphone Video Audio MP3 Jack Module. This female jack connector adapter 3.5mm audio soldered on a PCB board, it is ideal to use in our projects. TRRS connectors are the audio-style connectors seen on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve", reflecting the fact that unlike a standard stereo connector, this one actually has three conductors and a ground. Code M0195 Available Price €0.79
USB Type B Female 2.0 Connector Adapter with PCB The USB (Universal Serial Bus), is an industrial standard bus that defines the cables, connectors and protocols used in a bus to connect , communicate and supply power between computers, peripherals and electronic devices. This female type B USB connector adapter soldered on a PCB board is ideal for use in your projects. It has connection points where you can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points. USB Type B Female 2.0 Connector Adapter with PCB features:- Connector type: USB Type B Female, - Internal color: White, - Nominal voltage: 30v DC, - Maximum current: 1A DC, - Insulation resistance: 1000Mohm, - Operating temperature: -25ºC to + 85ºC, Code M0193 Available Regular price €0.83 -€0.10 Price €0.73
TRRS jack adapter 3.5mm female audio with PCB board 3.5mm Audio Jack Breakout Headphone Video Audio MP3 Jack Module. This female jack connector adapter 3.5mm audio soldered on a PCB board, it is ideal to use in our projects. TRRS connectors are the audio-style connectors seen on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve", reflecting the fact that unlike a standard stereo connector, this one actually has three conductors and a ground. Code M0195 Available Price €0.79
USB Type B Female 2.0 Connector Adapter with PCB The USB (Universal Serial Bus), is an industrial standard bus that defines the cables, connectors and protocols used in a bus to connect , communicate and supply power between computers, peripherals and electronic devices. This female type B USB connector adapter soldered on a PCB board is ideal for use in your projects. It has connection points where you can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points. USB Type B Female 2.0 Connector Adapter with PCB features:- Connector type: USB Type B Female, - Internal color: White, - Nominal voltage: 30v DC, - Maximum current: 1A DC, - Insulation resistance: 1000Mohm, - Operating temperature: -25ºC to + 85ºC, Code M0193 Available Regular price €0.83 -€0.10 Price €0.73