Resistor 680R Ohm 5% 0,25W 1/4W Resistor 680R Ohm 5% 0,25W 1/4W features:- 680R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0012 Available Price €0.08
HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit HCF4017BE DIP16 Counters/Dividers ST Microelectronics Integrated Circuit features: - Blister: DIP16- Number of pins: 16- Step between pins: 2.54 mm- Manufacturer: ST Microelectronics - VDD power supply voltage: 3 - 15 VDC- Input voltage: VDD- High output voltage level V (OH): 4.95 - 14.95 VDC- Output voltage low level V (OL): 0.05 VDC- High input voltage level V (IH): 3.5 - 11 VDC- Input voltage low level V (IL): 1.5 - 4 VDC - Inactive state current: 0.04 - 600 μA- Output drive current I (OH): -2.4 - 0.36 mA- Output leakage current I (OL): 0.36 - 2.4 mA- Input leakage current I (IH), I (IL): ± 1 μA - Operating temperature: -40 ° C to 85 ° C- Storage temperature: -65 ° C to 150 ° C Code T0062 Available Price €1.10
LED Display 4-Digit 7-Segment Red Common Anode LED Display 4-Digit 7-Segment Red Common Anode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 12- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 4- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C- Storage temperature: -30°C - + 85°C- Screen with common anode connection- Screen size: 50.3x19x8 mm Code P0123 Available Price €2.86
Infrared Receiver VS 1838 38kHz Ideal for projects with ARDUINO, PIC, AVR, Raspberry The infrared receiver receives the signal of 38kHz for remote control Code W0042 Available Price €0.65
Waterproof Electronic ABS Plastic Junction Prototype Box 240x160x90mm Waterproof Electronic ABS Plastic Junction Prototype Box 240x160x90mm features: - Excellent waterproof performance and moisture proof- Dimension 240x160x90mm Code H0326 Last items in stock Price €5.85
RFID Module with Card and Pendant It is compatible with almost any microcontroller, Arduino, PIC, AVR.It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features: - Supports Quick CRYPTO1 and MIFARE- Operating current: 13-26mA at 3.3V- Standby current: 10-13mA to 3.3V- Sleep-mode current: <80μA- Maximum current: 30mA- Frequency of operation: 13.56Mhz- Reading distance: 0 to 60mm- Communication protocol: SPI- Maximum SPI speed: 10Mbit / s- Maximum data rate: 10Mbit / s- Operating temperature: -20 to 80ºC- Humidity of operation: 5% -95% Code M0015 Available Price €2.79
Resistors 100 Ohm 5% 2W Resistances (100 Ohm) with 5% tolerance and 2W power. Carbon film type. Code D0105 Available Price €0.18
Power Supply Transformer 220V AC/DC 2A 12V Power Supply Transformer 220V AC/DC 2A 12V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 12V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0015 Available Price €4.79
Rotary Encoder EC11 with Push Button Switch It can be used to control the microprocessor of the Arduino AVR PIC system and others, or as a digital potentiometer rotating the rotary encoder can be counted in positive and negative, depending on the direction of rotation; with the button of the rotary encoder can be reset to its initial state, which starts counting from 0. Code M0012 Available Price €1.39
Relay SRD-12 DC-2P 12V 10A SPDT Relay SRD-12 DC-2P 12V 10A SPDT features:- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- For power switching with 12V DC signals - Microcontroller, Arduino, Electronica Code RL012 Available Price €0.98
ESP32-CAM WiFi Camera + Bluetooth Module The ESP32-CAM is a camera module with the ESP32-S chip. It features an OV2640 camera, several GPIOs to connect peripherals, and microSD card slot. Code W0100 Available Price €9.45
Wireless Module Arduino compatible HC-06 HC06 The Bluetooth HC-06 module is one of the best options for projects where you need wireless communications. Arduino Wireless Module HC-06 HC06 features: - CSR BC417 Chipset - Power: 3.3V - Bluetooth version V2.0 + EDR - Frequency: 2.4GHz band ISM - Modulation: GFSK - Range approx. 10m - Security: Authentication and encryption. - Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps - Supports AT commands for configuration through a serial port - Working temperature: -20 ºC to +75 ºC - Working current - pairing: 80 mA - Transmission: 8mA - Size: 28 x 12mm Code W0018 Available Price €9.50
Voice Module MP3 Player XY-V17B is a smart voice module, integrated IO segment trigger, control UART series, ONE_line control of a single serial bus, MP3 standard and other functions; Supports MP3, WAV format decoding, maximum storage capacity on 32G TF card, update audio files from TF memory card via USB data cable to connect computer. Voice Module MP3 Player features: - Support MP3, WAV decoder format. - Support sample rate ( KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48. - 24-bit DAC output, support 90dB dynamic range, support 85dB signal-to-noise ratio. - Fully compatible with FAT16 / FAT32 file system, 32G TF card with maximum support, 32G U disk support. Code M0164 Available Price €4.90
Double Joystick Module 2 Axis XY PS2 Ideal for your arduino projects, but can also be used with other microcontrollers. Double Joystick Module 2 Axis XY PS2 features: - Two axes (XY) - Return to the center - Central push button - Connections: + 5Vcc / GND / VRx / VRy / SW - Dimensions: 4 x 2.6 x 3.2cm Code M0010 Available Regular price €2.50 -€0.31 Price €2.19
AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz) Signal generator including the AD9851 chip, it has two sinusoidal outputs and two square outputs. Characteristic: - Supply voltage: 2.7 - 5 VDC, - Output 2 sine waves and 2 square waves, - AD9851 chip with 30 MHz active crystal, - Harmonics increase from 20 MHz, - Sine signal: 0-70 MHz - Square wave: 0-1 MHz, - Use 70MHz low pass filter to improve waveform, - Parallel and serial data input can be selected by jumper, - Reference pin output (PIN12 ), convenient to adjust the output wave, - The comparator reference input voltage is generated by the variable resistance, - Adjust this resistance can get different square wave duty cycles. Code M0189 Backorder Price €15.90
W5100 Mini Network Module Ethernet Shield Arduino compatible W5100 Mini Network Module Ethernet Shield Arduino features: - Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip - Provides a simple mode to connect your module to the local network and the internet - Compatible with the official Arduino Ethernet library - With this shield you can build a web server - It can be used as a server or as a client - Controller: Wiznet W5100 - Supports TCP and UDP protocols - Supports up to 4 simultaneous connections - Compatible with all versions of Arduino: UNO, mega 1280/2560 - Dimensions: 50 x 25x 25mm Code W0074 Available Price €10.90
Expansion Module I/O XBEE This XBEE module contains everything you need to create your projects, including socket to mount an XBee device, VDC power pins, GND, terminal block to power a servo motor, reset button and much more. The new expansion IO Shield V7.1 offers several advantages and these are its characteristics.Compatible with the new Arduino Due.3.3V and 5V power pins. Switch for switching for programming.Header colors to illustrate the digital or analog pins. Expansion Module I/O XBEE features: - XBEE connector module- I2C interface- SPI interface- 3-pin sensor interface: - VCC: Supply voltage - GND: Earth connection - D: digital pin corresponding to the Arduino chart- WIFI-LPT100 connector Code M0150 Available Price €8.36
Mini Submersible Water Pump DC USB DC 5V 120L/H 0.65W 5V water pump with USB connector for fountain, aquarium, pool, water tank, humidifier, green wall decoration, candle decoration, solar water circulation,etc. Code M0225 Available Price €8.90
Rotary Encoder EC11 with Push Button Switch It can be used to control the microprocessor of the Arduino AVR PIC system and others, or as a digital potentiometer rotating the rotary encoder can be counted in positive and negative, depending on the direction of rotation; with the button of the rotary encoder can be reset to its initial state, which starts counting from 0. Code M0012 Available Price €1.39
Relay SRD-12 DC-2P 12V 10A SPDT Relay SRD-12 DC-2P 12V 10A SPDT features:- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- For power switching with 12V DC signals - Microcontroller, Arduino, Electronica Code RL012 Available Price €0.98
ESP32-CAM WiFi Camera + Bluetooth Module The ESP32-CAM is a camera module with the ESP32-S chip. It features an OV2640 camera, several GPIOs to connect peripherals, and microSD card slot. Code W0100 Available Price €9.45
Wireless Module Arduino compatible HC-06 HC06 The Bluetooth HC-06 module is one of the best options for projects where you need wireless communications. Arduino Wireless Module HC-06 HC06 features: - CSR BC417 Chipset - Power: 3.3V - Bluetooth version V2.0 + EDR - Frequency: 2.4GHz band ISM - Modulation: GFSK - Range approx. 10m - Security: Authentication and encryption. - Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps - Supports AT commands for configuration through a serial port - Working temperature: -20 ºC to +75 ºC - Working current - pairing: 80 mA - Transmission: 8mA - Size: 28 x 12mm Code W0018 Available Price €9.50
Voice Module MP3 Player XY-V17B is a smart voice module, integrated IO segment trigger, control UART series, ONE_line control of a single serial bus, MP3 standard and other functions; Supports MP3, WAV format decoding, maximum storage capacity on 32G TF card, update audio files from TF memory card via USB data cable to connect computer. Voice Module MP3 Player features: - Support MP3, WAV decoder format. - Support sample rate ( KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48. - 24-bit DAC output, support 90dB dynamic range, support 85dB signal-to-noise ratio. - Fully compatible with FAT16 / FAT32 file system, 32G TF card with maximum support, 32G U disk support. Code M0164 Available Price €4.90
Double Joystick Module 2 Axis XY PS2 Ideal for your arduino projects, but can also be used with other microcontrollers. Double Joystick Module 2 Axis XY PS2 features: - Two axes (XY) - Return to the center - Central push button - Connections: + 5Vcc / GND / VRx / VRy / SW - Dimensions: 4 x 2.6 x 3.2cm Code M0010 Available Regular price €2.50 -€0.31 Price €2.19
AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz) Signal generator including the AD9851 chip, it has two sinusoidal outputs and two square outputs. Characteristic: - Supply voltage: 2.7 - 5 VDC, - Output 2 sine waves and 2 square waves, - AD9851 chip with 30 MHz active crystal, - Harmonics increase from 20 MHz, - Sine signal: 0-70 MHz - Square wave: 0-1 MHz, - Use 70MHz low pass filter to improve waveform, - Parallel and serial data input can be selected by jumper, - Reference pin output (PIN12 ), convenient to adjust the output wave, - The comparator reference input voltage is generated by the variable resistance, - Adjust this resistance can get different square wave duty cycles. Code M0189 Backorder Price €15.90
W5100 Mini Network Module Ethernet Shield Arduino compatible W5100 Mini Network Module Ethernet Shield Arduino features: - Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip - Provides a simple mode to connect your module to the local network and the internet - Compatible with the official Arduino Ethernet library - With this shield you can build a web server - It can be used as a server or as a client - Controller: Wiznet W5100 - Supports TCP and UDP protocols - Supports up to 4 simultaneous connections - Compatible with all versions of Arduino: UNO, mega 1280/2560 - Dimensions: 50 x 25x 25mm Code W0074 Available Price €10.90
Expansion Module I/O XBEE This XBEE module contains everything you need to create your projects, including socket to mount an XBee device, VDC power pins, GND, terminal block to power a servo motor, reset button and much more. The new expansion IO Shield V7.1 offers several advantages and these are its characteristics.Compatible with the new Arduino Due.3.3V and 5V power pins. Switch for switching for programming.Header colors to illustrate the digital or analog pins. Expansion Module I/O XBEE features: - XBEE connector module- I2C interface- SPI interface- 3-pin sensor interface: - VCC: Supply voltage - GND: Earth connection - D: digital pin corresponding to the Arduino chart- WIFI-LPT100 connector Code M0150 Available Price €8.36
Mini Submersible Water Pump DC USB DC 5V 120L/H 0.65W 5V water pump with USB connector for fountain, aquarium, pool, water tank, humidifier, green wall decoration, candle decoration, solar water circulation,etc. Code M0225 Available Price €8.90