AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz)
  • AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz)
  • AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz)
  • AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz)

AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz)

M0189

Signal generator including the AD9851 chip, it has two sinusoidal outputs and two square outputs.

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

AD9851 DDS signal generator module 2 outputs for sine waves (0-70 MHz) and two outputs for square signals (0-1 MHz) description

Signal generator including the AD9851 chip, it has two sinusoidal outputs and two square outputs.

Characteristic:

- Supply voltage: 2.7 - 5 VDC,
- Output 2 sine waves and 2 square waves,
- AD9851 chip with 30 MHz active crystal,
- Harmonics increase from 20 MHz,
- Sine signal: 0-70 MHz
- Square wave: 0-1 MHz,
- Use 70MHz low pass filter to improve waveform,
- Parallel and serial data input can be selected by jumper,
- Reference pin output (PIN12 ), convenient to adjust the output wave,
- The comparator reference input voltage is generated by the variable resistance,
- Adjust this resistance can get different square wave duty cycles. div>

Customers who bought this product also bought

Speed controller for DC motor (PWM) 12V-40VDC 0.01-400W 8A 10A

Ideal to control the speed of DC motors.
Characteristic:
- Input voltage: 12-40VDC,
- Max continuous output current: 8A (peak current 10A),
- Control power: 0.01- 400W,
- Dimensions: 60x75x28mm,
- PWM frequency: 13kHz,
- Static current: 0.02 A (Standby),
- Adjustable duty cycle: 10% -100% ,
- It integrates a L7812CV TO-220 regulator,
- It incorporates a 10A fuse to protect the power circuit.
Note that the voltage applied to the motor will be the supply voltage applied to the circuit.

A0089

Price €7.95

5x Push Switch Button B3F Omron Blue Key 12mm

5x Push Switch Button B3F Omron Blue Key 12mm features:

- 5x Push Buttons B3F Omron Key
- Maximum current: 50 mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals: weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

K0074

Price €0.21

Relay Module DC 5V 10A 2 Channel Low/High Trigger

Relay Module DC 5V 10A 2 Channel Low/High Trigger features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- It has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL002

Price €3.15

Rotary Encoder EC11 with Push Button Switch

It can be used to control the microprocessor of the Arduino AVR PIC system and others, or as a digital potentiometer rotating the rotary encoder can be counted in positive and negative, depending on the direction of rotation; with the button of the rotary encoder can be reset to its initial state, which starts counting from 0.

M0012

Price €1.39

Arduino compatible UNO R3 board

- It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features:
- Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATmega328
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O Pins: 14
- Analog input pins: 6
- DC current per I / O Pin: 40 mA
- DC Current per Pin 3.3V: 50 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328
- SRAM 2 KB - Atmega328

B0009

Price €9.95

16x2 1602 LCD display HD44780 Backlit Blue background

It consists of a 16-character, 2-row display.
The display is compatible with the HD44780 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features:
- LCD screen , 16 characters and 2 lines
- 5V power supply
- HD44780 compatible controller
- Backlit blue background, white letters
- Include an adjustable contrast pin
- Dimensions (mm): 80 x 36 x 12

P0014

Regular price €2.65 -€0.75 Price €1.90
€15.90

13,14 tax excl.

Tax included
Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €15.90

Order until 4pm we will send today
30 days return