40x Female-Female Cable 10cm 40x Female-Female Cable 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont female connectors on both ends - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K1005 Available Price €1.64
40x Cables Female-Male 20cm 40x Cables Female-Male 20cm features: -Length: 20cm-Quantity: 40 cables-Connectors have male and female header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0008 Available Price €2.06
Wireless communication module APC220 RF kit APC220 433 MHz long range wireless modules with USB programming interface. The set provides wireless communication with a range of up to 1000 metres. Easy to configure solution for remote control of e.g. a robot. Code W0117 Available Price €34.12
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 Available Regular price €5.37 -€2.51 Price €2.86
Extension Board Shield Nano V3.0 ATmega328P Extension Board Shield for Arduino Nano V3.0. Code B0025 Available Price €2.44
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €8.22
Tower Pro Micro Servo 9G SG90 pack 10pcs Pack 10pcs of micro servo 9g SG90. Code R0014 Available Price €20.62
ESP32-CAM WiFi Camera + Bluetooth Module The ESP32-CAM is a camera module with the ESP32-S chip. It features an OV2640 camera, several GPIOs to connect peripherals, and microSD card slot. Code W0100 ✗ Out-of-Stock Price €7.81
GPS Module GY-GPS6MV2 NEO6MV2 EEPROM with Antenna It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the beginning 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna 18x18 mm - Size: 22x30x13 mm Code M0071 ✗ Out-of-Stock Price €13.14
GPS Module U-BLOX NEO-7M for Arduino - VMA430 This small GPS module is an ideal module for Arduino. The NEO-7 series is characterised by the exceptional performance of the highly sensitive u-blox 7 GNSS (GPS, GLONASS, QZSS and SBAS). Code VE009 Available Price €29.67
SparkFun GPS Breakout This small GPS breakout is yet another Qwiic module from SparkFun as per usual based on I2C - meaning that you can keep your serial port free for other applications. The board features XA1110 GPS module from GTOP and MediaTek MT3333 chipset already loaded with SparkFun firmware enabling clean and easy use of both ports. Code SP034 Last items in stock Price €54.54
USB GPS Receiver with 2m Extension Cable (Compatible with Raspberry Pi/ LattePanda/ Jetson Nano) It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process. Code RA160 ✗ Out-of-Stock Price €14.83
GPS Module GY-GPS6MV2 NEO6MV2 EEPROM with Antenna It is a mini GPS module including a NEO-6M chip and an EEPROM memory chip. The SMA antenna port is On-board IPEX and cell phone button battery ensure robust positioning efficiency and fast satellite discovery speed. Serial port provides simple initial knowledge to stay in touch with the most compatible Arduino-compatible MCU STM32. Characteristic: - Supply voltage: 3.3 - 5 VDC - Operating current: 45 mA - Communication speed: 9600 Bauds configurable from 4800 to 115200 Bauds - Navigation update: 5 Hz max. (1 Hz default) - Capture time: at the beginning 27s, in operation 1s - Operating temperature: -40 ° C - + 85 ° C - separate GPS antenna 18x18 mm - Size: 22x30x13 mm Code M0071 ✗ Out-of-Stock Price €13.14
GPS Module U-BLOX NEO-7M for Arduino - VMA430 This small GPS module is an ideal module for Arduino. The NEO-7 series is characterised by the exceptional performance of the highly sensitive u-blox 7 GNSS (GPS, GLONASS, QZSS and SBAS). Code VE009 Available Price €29.67
SparkFun GPS Breakout This small GPS breakout is yet another Qwiic module from SparkFun as per usual based on I2C - meaning that you can keep your serial port free for other applications. The board features XA1110 GPS module from GTOP and MediaTek MT3333 chipset already loaded with SparkFun firmware enabling clean and easy use of both ports. Code SP034 Last items in stock Price €54.54
USB GPS Receiver with 2m Extension Cable (Compatible with Raspberry Pi/ LattePanda/ Jetson Nano) It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process. Code RA160 ✗ Out-of-Stock Price €14.83