Filter By


Filter By

Availability

Availability

Brand

Brand

Price

Price

  • €0.00 - €110.00

Chip

Chip

Voltages

Voltages

Firmware

Firmware

Módulo ESP

Módulo ESP

Número de canales

Número de canales

Pines

Pines

Arduino Modules

If Arduino is the brain, sensors are the nose, eyes, and ears, modules could be compared in one sense to the hands, mouth, and feet of our project. But since a robot cannot be directly compared to a human, in the modules we also include communication modules (RF, Bluetooth, WiFi), amplifiers, translators and screens. An Arduino alone is already a powerful tool, however, to reveal its true and complete power you have to complete it with modules. Whether it's a buzzer, MP3 player module, a display or any other - those modules will show you what the Arduino can achieve. Arduino modules are a crucial part of our offering, which we are continually expanding - watch for it and look forward to hearing from you often.

Arduino Modules

Subcategories

Showing 1-20 of 219 item(s)

W5100 Mini Network Module Ethernet Shield Arduino compatible

W5100 Mini Network Module Ethernet Shield Arduino features:
- Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip
- Provides a simple mode to connect your module to the local network and the internet
- Compatible with the official Arduino Ethernet library
- With this shield you can build a web server
- It can be used as a server or as a client - Controller: Wiznet W5100
- Supports TCP and UDP protocols
- Supports up to 4 simultaneous connections
- Compatible with all versions of Arduino: UNO, mega 1280/2560
- Dimensions: 50 x 25x 25mm

W0074

Price €10.90

433MHz RF Wireless Receiver + Transmitter

Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features:

Specifications of the emitter module: - Power supply: 3V ~ 12V
- Working intensity: max = 40mA (at 12V), min = 9mA (at 3V)
- AM ASK / OOK modulation
- SAW filter
- Working frequency: 315MHz-433.92MHz
- Transmission power: 25mW (315MHz at 12V)
- Range: 20 to 200 meters (different voltages can give different results)
- Transfer speed: 4 kB / S
- Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V
- Work intensity: 5.5mA (at 5.0VDC)
- Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm

W0010

Price €1.09

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL001

Price €2.39

ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

W0014

Price €4.95

DSC321 AT24C32 with Real Time Clock RTC Battery

RTC DS3231 clock module with EEPROM 32k.
High precision RTC module.
Can be used in projects of Arduino, PIC, AVR, STM32 and other.
DSC321 AT24C32 with Real Time Clock RTC Battery features:
- Based on DS3231
- EEPROM AT24C32 (32K)
- I2C interface
- LED work indicator
- Includes CR2032 3V battery

M0004

Price €4.49

Mini Submersible Water Pump DC 12V 200L/h 3W for ARDUINO

Mini Submersible Water Pump DC 5.5-12V 200L / H 3W
Mini Submersible Water Pump DC 12V 200L/h 3W ARDUINO features:

* Operating voltage: 5.5-12V * Max flow: max. 200 l / h * Maximum pumping height: 40cm- max. 150cm * Cable length: 140cm * Jack DC 5.5x2.1mm connector (ext / int) * Outlet diameter: 8 mm * Dimensions: 36mm x 25mm

M0111

Price €9.95

Mini Submersible Water Pump DC 12V 240L/h 3.6W

Mini Submersible Water Pump DC 12V 240L/h 3.6W features:
- Operating voltage: 6-12V
- Max flow: max .. 240 l / h
- Maximum height pumping: max. 300cm
- Cable length: 150cm
- Jack DC 5.5x2.1mm connector (ext / int)
- Outlet diameter: 8 mm
- Dimensions: 38mm x 26mm
- Jack DC 5.5x2.1mm connector (fi ext / fi int)

M0110

Price €9.95

NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz

NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features:
- Standard: NFC Forum Type2 Tag Ntag215
- Protocol: ISO14443A
- Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ
- Reading distance: 0-10CM
- Communication speed: 106Kboud
- Working temperature: -20ºC to 70ºC
- Number of uses 100,000 times
- Data retention: 10 years
- Material: PVC
- Dimensions 86 x 54 x 0.84 mm

M0052

Price €1.99

ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3

The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features:
- Chip ENC28J60 Microchip
- Module: 10Base-T
- 3.3V power
- SPI interface
- 25Mhz speed
- LED status LED
- Hanrun network transformer
- Network Interface board HR911105A
- Operating temperature: -40ºC to + 85ºC
- Dimensions: 51 x 19 x 16 mm

W0006

Price €9.90

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL004

Regular price €3.15 -€0.50 Price €2.65

8 Channel High Trip 5V 10A Relay Module

This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, from the TTL 8 Channel High Trip 5V 10A Relay Module features:
- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage Vcc: 5Vdc
- Output Current: 10A
- High trip min 3.3V input IN1. ..IN8
- Relay activation current: 5 ~ 10mA
- Isolation: Yes
- Indicator LED: For each channel
- Dimensions: 55x 139mm
- Weight: 120g
COM GND jumper input: connects GND optocouplers and GND of the circuit

RL015

Price €9.95

NRF24L01 + Wireless Transceiver Module 2.4GHz

It is ultra compact and very low consumption. It works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripheral control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Transceiver Module 2.4GHz features:
- Based on chip NRF24L01 + Ultra Low Power
- Free band: 2.4GHz ISM
- Speed: 250kbps, 1Mbps, 2Mbps
- Working current - reception: 13 mA
- Transmission: 11 mA (900nA -deep sleep mode)
- Receiving sensitivity: -94dB 250kbps
- Coverage in closed spaces: 15m / 30m
- SPI interface
- Input voltage: 1.9V- 3.6V
- Input / output port voltage: 0V-3.3V / 5V
- Coverage in open areas: 100m approx.
- Clock frequency: 16MHz

W0005

Price €1.59

WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811

WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features:
- WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually
- WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable.
- They are based on the 5050 LED
- 24-bit color control (8-bit PWM per channel)
- 16.8 millions of colors per LED
- One-wire communication
- Power: max. 5 Vdc
- Current: 18.5mA
- Input and output terminals (data and power)

P0102

Price €1.69

NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface

NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface features:
- Operating voltage: 5V
- Wait time of the module receives the data: more than 2S
- The waiting time of the module sends data: more than 300
- Transfer speed: 50 Byte / S (theoretical value)
- I2C / TWI address: 0 x 47 (decimal 35)
- Address NRF24L01: 0 x 34, 0 x 43, 0 x 10, 0 x 10, 0 x 01 (from lowest to highest)
- Size: 44 x 23 mm

W0066

Price €4.46

SD Card Module Reader

The SD card reader module is a simple solution for transferring data to and from a standard SD card.
The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.
SD Card Module Reader features:
- Supply voltage: 3.3V or 5V 
- Interface: SPI 3.3V
- Dimensions: 30mm x 50mm x 12mm

M0023

Price €0.99

Active filters

Arduino communication modules

Assuming that we haven´t yet mastered AI programming to the maximum, and our robot still requires certain instructions from us, we will definitely need a way of communicating with it. The same goes for the projects in which more than one device has to work in cooperation. Thankfully, a range of companies, including Adafruit and Sparkfun, has delivered us an almost unlimited set of modules that will enable us to do that. Modules Arduino WiFi, modules Bluetooth, modules RF all serve the same purpose, nonetheless depending on the conditions you want to use your project in, one might have several advantages over the others. Revise our materials on blog and tutorials to learn about the benefits of each. 

Whichever you chose, be that standard ESP8266 o DS1307, we definitely have it.

Arduino video cameras

Now that your robot is equipped with a communication module, it can give you back information however it still needs a way to collect it and show it to you (unless you believe you can receive Bluetooth signal yourself). For the first application, you will need sensors, which we cover extensively in the sensor section, or other input devices such as cameras and microphones. For the second application (being able to give you back information), the screen is the most basic device (obviously can be coupled with speakers). We can offer you a wide range of screens and speakers as well as cameras from a variety of producers including Sparkfun, Adafruit, Pololu. Search our offer and see if you can find what you need