18650 battery base for soldering to PCB. Characteristic: - Measurements 78x 20x 21mm
- Weight: 10 gr. ( approx.)
- Stack length max 67mm

Battery holder for 18650 batteries connected in series.

Base of two 18650 batteries to solder on PCB. Characteristic: - Measurements 78x 40x 21mm
- Weight: 10 gr . (approx.)
- Stack length max 67mm

Battery Holder Button 3V CR2032 PCB CR2032 PCB features:
- Battery compartment for PCB printed circuit
- Quantity: 1 unit

LITHIUM POLYMER BATTERY Battery LIPO 1520mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 1520 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 51 mm -Battery width / diameter- 34mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2450mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2600mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2650mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2650 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 71 mm -Width / diameter of the battery- 95 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2750mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3350mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3400mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3900mAh 3.7V

The novelty of micro:Bit v2.2 for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package.

The novelty of micro:Bit for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package. 

- Ball Bearing 3D Printer Reprap Prusa
- Measurements:
Inside diameter D: 8mm
Outside diameter D: 24mm
Width - dimension B: 8mm
- Quantity: 1 unit

Black Heated Bed MK2B Reprap 3D Printer features:

- It can be powered with 12V or 24V current. It has FR4 laminate of 1.6m +- 0.15mm and 2 layers of 35μm copper.
- Measurements: 214x214 mm

- This 3D pen is suitable for ABS or PLA filaments of 1,75m
- Includes an LCD screen that allows you to read the temperature, speed and filament control
- It also comes with button controls to control the extrusion speed
- You can use this powerful 3D pen to draw, draw or trace objects on paper Blue 3D-Pen for ABS/PLA Filaments features:
- Input voltage: 12V
- Current consumption: 2A
- Diameter of the nozzle: 0.7mm
- Heating temperature: 160-230 degrees adjustable
- Ballpoint pen color: blue
- Filaments of random colors
- Includes PLA filament and power 100-240 VAC / 50 Hz - 12VDC / 2A
- Recommended for adults and children 8 years and older

This module includes the component BME280 that is translated into a digital signal.
The equipment uses the two I2C and SPI interfaces. The BME280 does not allow the module to be used as an altimeter as opposed to its successor BMP280.
Its 5-pin straight connector allows easy connection to other electronic boards. BME280 Digital Temperature Humidity Barometric Pressure Module features:
- Interfaces:
- I2C (up to 3.4 MHz)
- SPI (up to 10 MHz)
- Supply voltage: 1.8-5VDC
- Module operating range:
- Temperature: -40ºC to + 85ºC
- Humidity: 0-100%
- Pressure: 300-1100 hPa
- Resolution of the measures:
- Temperature: 0.01ºC
- Humidity: 0.008%
- Pressure: 0. 18Pa
- Accuracy of the measures:
- Temperature: +/>

This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.
The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.
Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features:
- Interfaces:
       -I2C (up to 3.4 MHz)
       -SPI (up to 10 MHz)
- Supply voltage: 1.8-5VDC
- Module operating range:
       - Temperature: -40ºC to + 85ºC
0-100%
       - Pressure: 300-1100 hPa
- Resolution of the measures:
       - Temperature: 0.01ºC

This module is an active buzzer for Arduino and emits different sounds at various frequencies.
It does not accept oscillation source, it only receives square waves for drive sound. 

Cable chain 10x20 1m CNC 3D printer features:
-Suitable for movements where cable displacement or twisting is needed, where cable protection is needed. - Easy for instalation and maintenance; Low noise, high speed wear resistant movement. - The cable structure has been widely used in CNC machine tools, electronic equipment, fire fighting machinery and equipment, stone machinery, glass machinery, machine doors and windows, injection molding machines, robots, overweight transport equipment, automated warehouses. - Interior widths 10x20mm
- Exterior measurement 15x28mm
- Material: reinforced series polyamide
- Length 1m
- Quantity: 1 unit

The device is designed to find and identify cables without disturbing the insulation. Finds broken wires, fault points and continuity test.

This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project. Capacitive Touch Sensor Module TTP229 - 16 Touch Sensitive Pads 

Car Robot Tire Wheel Smart Car features:
- Dimensions of the wheel:
   - Diameter: 65mm
   - Width: 26 mm
- Quantity: 1 unit