Matrix Membrane Keyboard 4x4 Modulo High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side. Ideal for your Arduino projects, but can also be used with other microcontrollers. Matrix Membrane Keyboard 4x4 Modulo features: - Rating circuit, Max: DC 35V 100 mA - Cable length: 85 mm - Dupont 8 pin connector - Specific insulation: 100 M Ohm, 100V - Useful life: + 1 million uses - Contact parting: Code M0025 Available Price €1.48
10x Push button 6x6x9mm 10x Push button 6x6x9mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x9mm -Quantity: 10 units Code K0077 Available Price €0.16
Module Relay 5V Light sensor LDR photoresistor This module is a three way switch ( COM, NO and NC ) that uses the intensity of the ambient light to control directly the load at the output. Its adjustment potentiometer allows changing the sensitivity and setting the start threshold of the relay. The relay is energized when it is darker than the threshold. Code RL016 Available Price €1.98
Wireless Remote Control + 4 Channel Receiver Wireless Remote Control + 4 Channel Receiver features: Remote Control: - Operating voltage: DC12V (battery included)- Operating current: 10mA @> Code W0001 Available Price €4.09
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €8.22
Breadboard Power Supply Protoboard 830/400 Points MB102 Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. Breadboard Power Supply Protoboard 830/400 Points MB102 features:- Input voltage supports up to 12V- Selectable 3.3V or 5V- USB input or standard DC 2.1 x5.5mm connector- Maximum current 700mA- It fits perfectly on the MB-102 breadboard feeding the two lateral buses- Weight: 15 gr. (approx.) Compatible only with MB-102 type plates Code A0003 Available Price €1.61
1N4007 Rectifier Diodes 1A 1000V DO-41 1N4007 Rectifier Diodes 1A 1000V DO-41 features:- Standard rectifier diode- Configuration: Simple- Reverse voltage: 1000V- Direct voltage drop: 1V- Direct direct current: 1A- Maximum overvoltage current: 30A- Encapsulated: DO-41- Operational tension: -65ºC to + 125ºC Code T0002 Available Price €0.04
Electronic Antistatic Wrist Bracelet ESD Blue Electronic Antistatic Wrist Bracelet ESD Blue features: - Electronic Antistatic Bracelet, blue color- Protection against electrostatic charges- Adjustable bracelet with crocodile clip connector- Material: The conductive elastic band is made of nylon and woven in stainless steel- Extensible length up to 180 centimeters- Weight: 25 gr.- Quantity: 1 loose unit in plastic bag Code H0142 Available Price €1.53
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Last items in stock Regular price €26.44 -€2.00 Price €24.44
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 ✗ Out-of-Stock Price €28.84
RJ-45, RJ11, RJ12 network cable tester The tester is designed to test RJ45 network cabling: UTP, FTP, STP and telephone cables: RJ11 and RJ12. 8 LEDs for testing each individual conductor of an RJ twisted pair (cable is connected correctly when parallel LEDs 1-1 to 8-8 light up simultaneously). Code H0317 ✗ Out-of-Stock Price €4.54
Desktop multimeter - laboratory meter UNI-T UT801 Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes Code H0310 Last items in stock Regular price €90.00 -€15.00 Price €75.00
Wind meter with temperature measurement function Uni-T UT363S UT363S mini wind speed and temperature meters. UT363S measures wind speeds up to 30 m/s (108 km/h) with an accuracy of 0.01. The following units of measurement are available: m/s, km/h, ft/min, knots, mph. Code H0360 Last items in stock Price €40.90
Type K Thermocouple Model TP-01 200 ºC 1m Temperature Sensor TP01 This connector is widely used in thermocouple and RTD circuits, giving a fast and good contact solution. It is designed with a good insulation, metal pins, its construction ensures a good contact. Code S0051 Available Price €1.48
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 ✗ Out-of-Stock Price €53.71
UNI-T UT12D - Voltage detector non-contact test pen Test pen for non-contact voltage detection with LED torch and buzzer. Allows to differentiate between different lines of alternating current. AC voltage detection range is 24-1000V Code H0210 Available Regular price €9.00 -€2.00 Price €7.00
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Available Regular price €75.95 -€2.00 Price €73.95
Distance Meter UNI-T LM20m Super simple laser distance meter with a range of 20 metres and high accuracy. Functions: automatic switch-off single measurement laser pointer Code H0308 Last items in stock Regular price €19.01 -€3.00 Price €16.01
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Last items in stock Regular price €26.44 -€2.00 Price €24.44
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 ✗ Out-of-Stock Price €28.84
RJ-45, RJ11, RJ12 network cable tester The tester is designed to test RJ45 network cabling: UTP, FTP, STP and telephone cables: RJ11 and RJ12. 8 LEDs for testing each individual conductor of an RJ twisted pair (cable is connected correctly when parallel LEDs 1-1 to 8-8 light up simultaneously). Code H0317 ✗ Out-of-Stock Price €4.54
Desktop multimeter - laboratory meter UNI-T UT801 Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes Code H0310 Last items in stock Regular price €90.00 -€15.00 Price €75.00
Wind meter with temperature measurement function Uni-T UT363S UT363S mini wind speed and temperature meters. UT363S measures wind speeds up to 30 m/s (108 km/h) with an accuracy of 0.01. The following units of measurement are available: m/s, km/h, ft/min, knots, mph. Code H0360 Last items in stock Price €40.90
Type K Thermocouple Model TP-01 200 ºC 1m Temperature Sensor TP01 This connector is widely used in thermocouple and RTD circuits, giving a fast and good contact solution. It is designed with a good insulation, metal pins, its construction ensures a good contact. Code S0051 Available Price €1.48
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 ✗ Out-of-Stock Price €53.71
UNI-T UT12D - Voltage detector non-contact test pen Test pen for non-contact voltage detection with LED torch and buzzer. Allows to differentiate between different lines of alternating current. AC voltage detection range is 24-1000V Code H0210 Available Regular price €9.00 -€2.00 Price €7.00
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Available Regular price €75.95 -€2.00 Price €73.95
Distance Meter UNI-T LM20m Super simple laser distance meter with a range of 20 metres and high accuracy. Functions: automatic switch-off single measurement laser pointer Code H0308 Last items in stock Regular price €19.01 -€3.00 Price €16.01