Quartz Crystal Oscillator 20 MHz

Resistor 330K Ohm 5% 0,25W 1/4W features:
-330 Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features:

- Based on the LM2596S-ADJ regulator
- Rectification: Asynchronous
- Output Voltage: 1.25v - 32v DC (adjustable)
- Voltage of Input: 3.2v - 35v DC
- Max Output Current: 3A (with heat sink)
- Ripple at output voltage: 30mV
- Frequency: 150KHz
- Max Conversion Efficiency: 92%
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 2.5%
- Operating Temperature: -40ºC to + 85ºC
- Measurements 43x 21x 14 mm

Mini Soldering Iron Stand features:
- Mini Holder for tin soldering iron
- Dimensions: 65x 40mm

20x Ceramic Capacitor 220nF (0,1uF) 50V 224 features:
-Type: ceramic Z5U
-Tolerance: +80 -20%
-Dimensions: diameter 9.5mm, pitch 5.08mm

Orders only in multiples of 20 units

Power Adapter 220VAC DC 5.1V, 3A USB-C features:
- Input voltage: 100 ~ 240V AC 50Hz
- Output voltage: 5.1V DC
- Output current: 3A
- DC connector: USB-C
- Cable length 80cm

Stepstick A4988 controller
Driver for stepper motors
Used with Ramps 1.4 - RepRapArduino Mega Pololu Shield
A4988 + Stepstick Radiator Stepper Motor Reprap features:

- Minimum operating voltage: 8 V
- Operating voltage maximum: 35 V
- Maximum current: ± 2 A (adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16
- Factory soldered temples
- Use potentiometer to adjust current
- Measurements: 20x16x12 mm

RGB LEDs WS2812B
WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually.
WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED. 30 individually indexable LEDs.
24-bit color control (8-PWM) -bit per channel)
16.8 million colors per LED
One-wire communication
Power: 5 V
Width: 11 mm
Thickness: 2.6 mm Length: 5 meters
Consumption: 1.8A (all white)
Waterproof
With 3M adhesive
Input and output terminals (data and power) Links
https://learn.adafruit.com/adafruit-neopixel-uberguide/>