Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0083 Available Regular price €7.95 -20% Price €6.36
LCD 2004 Intelligent Reprap Controller 3D Printer LCD 2004 Intelligent Reprap Controller 3D Printer can be connected directly to your RAMPS 1.4. All new operations, such as calibration, axis movement can be done only with the smart rotary encoder. You don't need to use your PC. Just use the G-Code layout stored on the SD card. Code I0021 Available Regular price €10.59 -€1.60 Price €8.99
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Available Regular price €8.90 -20% Price €7.12
12864 LCD Display Full Graphic Intelligent Controller 12864 LCD Display Full Graphic Intelligent Controller can be connected directly to your RAMPS 1.4. All new operations, such as calibration, axis movement can be done only with the smart rotary encoder. You don't need to use your PC. Just use the design in G-Code stored on the SD card. Code I0008 Last items in stock Price €12.49
Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Heater cartridge size: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable - Heater size: 6 x 20mm Code I0087 Available Regular price €8.95 -€1.25 Price €7.70
MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 The integrated mainboard driver MKS-GEN L V1.0 for 3D printer has been developed by Makerbase to optimize existing problems on the open source controller board such as Ramps 1.4.This product offers more flexible options for users.MKS-GEN L V1.0 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 features:- Mega2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.- Supports a variety of step-by-step drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change stepper motors and motors that users like.- Reserve the signal from the external controller, available to connect an external high current driver to drive stepper motors 57 and 86.se high quality MOSFET, better cooling and more stable. Code I0143 Available Regular price €31.90 -€2.00 Price €29.90
Makerbase MKS TFT35 V1.0 touch screen smart display controller 3d printer Touch screen / intelligent controller MKS TFT35 for 3D RepRap printers. The MKS TFT35 is a 3.5 "color touch screen for various RepRap or open source 3D printers. The screen is compatible with MKS boards such as MKS Base, MKS Gen and MKS Mini. It is easy to connect and can be easily used with marlin.It is completely open software and allows any adjustment. To simplify an individual project, various projects can be selected in the standard internal software. In addition, 13 buttons can be freely assigned to activate various functions at the touch of a button. The firmware can be quickly and easily customized using a file on the SD card and can be changed without external programs.. Code I0184 Last items in stock Price €55.90
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €8.95 -20% Price €7.16
Ramps 1.4 Reprap - Arduino Mega Pololu Shield RepRap Arduino Mega Pololu Shield (RAMPS) version 1.4 for 3D printer. RAMPS is a shield for the Arduino Mega - The outputs of the Arduino board are redirected to the motor drivers. To have the complete electronics for a 3D printer you need a RAMPS, an Arduino Mega and at least four stepper motor drivers Code I0019 Available Price €4.95
NTC thermistor 100K 3950 1m RepRap cable Sensor used to measure the temperature of the hotend or hot bed of your 3D printer Characteristic: - NTC Thermistor 100 K 3950 - Impedance: 100 K (25º of Temperature) - Accuracy: 1% - Sensor Diameter: 1.8 mm - Cable Length: 1 m - Cable: AWM UL 3398 150 ° C 300V - Ready to be installed and used. Fully insulated - Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS Code I0018 Available Price €1.10
Ramps 1.6 Reprap - Arduino Mega Pololu Shield RepRap Arduino Mega Pololu Shield (RAMPS) version 1.6 for 3D printer. Updated 4-layer PCB control panel motherboard with 5-piece DRV8825 driver for 3D printer. Includes heatsink and jumpers. RAMPS board is a shield for the Arduino Mega2560. The outputs of the Arduino board are redirected to the motor drivers. To have the complete electronics for a 3D printer you need a RAMPS, an Arduino Mega and at least four stepper motor drivers A4988, DRV8825. Code I0194 ✗ Out-of-Stock Price €9.90
Ramps 1.5 Reprap - Arduino Mega Pololu Shield RepRap Arduino Mega Pololu Shield (RAMPS) version 1.5 for 3D printer. Includes jumpers. RAMPS plate is a shield for the Arduino Mega2560. The outputs of the Arduino board are redirected to the motor drivers. To have the complete electronics for a 3D printer you need a RAMPS, an Arduino Mega and at least four stepper motor drivers A4988, DRV8825. Code I0193 Available Price €5.99
Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.79
MKS-GEN L V2.1 Integrated Controller Compatible with Ramps 1.4/Mega2560 R3 The integrated Mainboard MKS-GEN L V2.1 3D printer controller has been developed by Makerbase to optimise existing problems on the open source controller board such as Ramps 1.4. The MKS Gen L V2.1 is recommended as the main board for the OAT when using NEMA steppers. Code I0191 Available Price €31.90
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.79
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €24.90
Assembled MK8 Extruder Direct for Printer 3D Assembled MK8 Extruder Direct for Printer 3D features:- This extruder is ready for assembly and printing- 0.4mm nozzle- NTC 100k 3950 thermistor with cable- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable- Filament stud 1.75mm- Fan 12V 2 cables 40x40mm with metal protection- MK8 heat sink- MK8 aluminum extruder- PN Nema17 3.25V 1.3A motor with cable- Able to load with 4.48 kg/cm Code I0089 Last items in stock Price €26.90
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
Self-leveling sensor BLtouch 3D printer This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface. It can greatly improve the printing precision of your 3D printer. Its features: are simple, smart and precise. It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch. Self-leveling sensor BLtouch 3D printer features: - Supply voltage: 5V. - Supply current: 15mA - Max. Current: 300mA - Len3Dh cable: 150mm - Wiring: - 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal) Code I0094 Last items in stock Price €19.90
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Regular price €13.49 -€2.00 Price €11.49
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.59
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49