Solar Power Manager (C), Supports 3x 18650 Batteries, Multi Protection Circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output.    

Solar power manager (B), Built-in 10000mAh rechargeable Li-Po battery, Multiple protection circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output.

The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice.

This converter has internal DC/DC power supply and full isolation between USB and RS485 output and enables to establish reliable and secure communication. It adopts the original FT232RNL and SP485EEN chip solution, provides stable communication with built-in galvanic isolation, lightning protection and anti-electrostatic protection, etc., it is an ideal choice for industrial control equipment and/or applications with high communication requirements.

M12 high resolution lens, 16MP, 105° FOV, 3.56mm focal length, Raspberry Pi HQ camera M12 compatible.

RGB full-color LED matrix panel, 2.5mm Pitch, 64x32 pixels, adjustable brightness. At dusk, the dazzling neon lights of the streets and alleys illuminate the entire city, making it more dynamic. It's clear that the colour LED matrix panel plays an important role. Whether outside shops, on the bus or in a taxi, you can always see animations or advertising videos. Sounds great, why not give it a try? Provides open source development resources for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino.

The Portenta Breakout module extends the capabilities of the Arduino Portenta module with additional connectors and cables. The module includes a power switch, a DIP switch for selecting the start mode of the Arduino Portenta, as well as a series of connectors: USB A, RJ5, microSD, OpenMW, MIPI 20T JTAG. The board also includes the RTC chip, as well as a slot for the CR2032 battery, a screw connector for the power supply and all the cables for the Arduino Portenta module.

This SparkFun CO2, humidity and temperature sensor incorporates Sensirion's new generation of SCD40 photoacoustic CO2 sensors for highly accurate environmental readings. The sensor is capable of detecting concentrations from 0 to 40000 ppm with high precision above 400-2000 ppm ±(50 ppm+5%). The SCD40 has an integrated CMos® temperature and humidity sensor for greater precision.

The precision pocket screwdriver is a useful accessory not only for DIY enthusiasts. It will give good results, for example, for changing batteries in electronic toys and other repairs. Its small size makes it easy to store in your handbag, and its pen shape with an additional clip allows you to attach the product to your shirt or trouser pocket to have it at hand in any situation.

Do you want to have the right amount of essential tools for easy assembly and repair? Always be prepared for the job in hand. The 38-piece bit set from Rebel Tools is something every DIY enthusiast should have in their workshop. Each of the included accessories, i.e. the ratchet spanner, the magnetic adapter, the extension handle, the 9 socket spanners and the different types of bits will make your DIY work easier.

The SparkFun Qwiic Cable Kit includes 10 cables of different lengths and styles that will connect your Qwiic boards to each other, to a development platform or to a breadboard. Each Qwiic cable is colour coded red, black, blue and yellow with 1mm JST termination.

Do you want to have the right amount of essential tools to make assembly and repair easier? Always be prepared for the job in hand. This set of 100 Rebel Tools bits is something every DIY enthusiast should have in their workshop. Each of the accessories included, i.e. the magnetic holder, the 25 mm adapter and the different types of drill bits, will certainly make your DIY work easier.

Set of 18 screwdrivers made of chrome vanadium steel, with ergonomic handle. The set consists of 8 SL/PH screwdrivers and 10 SL/PH/Torx precision screwdrivers.

The Rebel tape measure is a must-have measuring instrument in every DIY enthusiast's toolbox. It is indispensable for measuring all kinds of materials and surfaces during major renovations, as well as for small repairs and home improvements.

Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip.

Set of 6 screwdrivers made of chrome vanadium steel, with ergonomic handle and magnetic tip. The set consists of straight and cross head screwdrivers.

A set of magnetic extension drills from the Rebel Tools range will come in very handy in any DIY workshop. The 60 mm long handle makes it easy to attach to any screwdriver. The set also includes 14 chrome vanadium steel tips, colour-coded for easy identification. The strong magnetic holder makes it easy to mount the bits for stable, comfortable work.

The pliers enable precise cutting and stripping of single and multi-core cables with diameters between 0.8 and 2.6 mm / 110-20 AWG.

SparkFun DataLogger IoT - 9DoF is a pre-programmed data logger to automatically log IMU, GPS and various pressure, humidity and distance sensors - all without having to write a single line of code! DataLogger automatically detects, configures and logs Qwiic sensors. It is specifically designed for users who only need to capture a large amount of data in a CSV or JSON file and return it to their larger project.

High quality and very flexible heat shrink tubing. Available in different sizes (1.6mm, 2.4mm, 3.2mm, 4.8mm, 6.4mm, 9.5mm) in 5 colours each 10 cm long.

High quality and very flexible heat shrink tubing. Available in different sizes (1.5mm, 2.5mm, 4mm, 6mm, 10mm and 13mm) in black colour each 10 cm long.

High quality and very flexible heat shrink tubing. Available in different sizes (1.5mm, 2.5mm, 4mm, 6mm, 10mm and 13mm) in six colours (black, white, red, yellow, yellow, green, blue), each 10 cm long.

Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia.

Official Raspberry Pi Mouse USB with wheel. Compatible with all Raspberry Pi products.

High quality and very flexible heat shrink tubing. Available in different sizes (2mm - 7mm) in five colours (black, red, yellow, yellow, green, blue), each 3.5 cm long.

LITHIUM POLYMER BATTERY Battery LIPO 3400mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3900mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2600mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2750mAh 3.7V

 Master Slave Bluetooth Modul for Arduino iOS Android. The HM10 supports Bluetooth 4.0 (low energy) and therefore has a relatively low power consumption.

Official Raspberry Pi keyboard suitable for all Raspberry Pi products. Comfortable ergonomic design.

LITHIUM POLYMER BATTERY Battery LIPO 2450mAh 3.7V

It is one of the most popular stepper motors with 200 steps per revolution and a maximum load of 2.6 kg/cm (0.25 Nm). It is supplied with a voltage of 12.0 V, consumes a current of 400 mA per coil. Dimensions: 42 x 42 x 34 mm (NEMA 17).  Comes with a 30 cm cable. We have the best stepper motors at the best prices!

Are you looking for a reliable USB to USB C cable that provides fast charging without getting hot? Choose the featured Surpass Series USB-C cable.

This cable will instantly charge the battery of your smartphone or tablet: it is compatible with devices equipped with a USB Type-C port. When connected to a computer, the cable works in two ways: it transmits data and also charges batteries.

Baseus i-wok2 USB LED desk lamp for monitor - black colour. Poor lighting in the workplace or poorly selected and positioned desk lamps can cause major inconvenience. Using our lamp will help you significantly improve your comfort at work.

Wall charger with 2 USB ports - type A and type C. Complies with Power Delivery and Quick Charge 3.0 requirements.

DDS UNI-T UTG932E 2-channel signal generator can generate sine wave, square wave, triangle wave, pulse wave and arbitrary wave, etc. The maximum output frequency of sine wave is 30MHz, sampling rate of 200 MSa/s.

UNI-T UTD2102CL+ Dual Channels Digital Storage Osciloscopio con 100MHz, 500MSa/s, 5000 wfms/s

Power Inverter - 12V DC to 220V AC 500W power converter. Supply voltage: 12V DC output voltage: 230 V AC; 50 Hz.

ESP32-WROOM-32E (ESP32-DEVKITC-32E) is an evaluation board with ESP32 processor, 4MB FLASH, 802.11 a/b/g/n (Wi-Fi, WiFi, WLAN) and BlueTooth® Smart Ready 4.x dual-mode. It is much faster than the ESP8266 processor (NodeMCU and similar), and very easy to use.

Creality 3D printer designed to print elements with maximum dimensions of 220 x 220 x 250 mm. Compact 3D printer with an excellent price-performance ratio.

Strip of 300 cold white coloured LED lights, 5 metres long.

A set of boards of different sizes, single or double-sided, ideal for testing or manufacturing printed circuit boards. The set contains about 10 boards of different sizes (e.g. 8x12 cm, 8x20 cm, 10x15 cm, 12x20 cm and others) and a total weight of about 0.5 kg.

Laminated Copper Clad Prototype PCB Circuit Board 30x20cm.

Power Inverter - 12V DC to 220V AC 300W power converter. Supply voltage: 12V DC output voltage: 230 V AC; 50 Hz.

The sensor measures the current flowing in the cable without cutting it. The measurement is made on a single insulated wire, the output is an analog voltage from 0 to 1 V. Sensor SCT-013-000, Non-Invasive 100A AC Current Meter

Mobile Charger 12V 2A USB-C 24W features:
- External power supply 220V to 12V / 2A 24W
- Plug type: USB C
- AC-DC adapter - 100-265V AC input, 50-60Hz
- 12V / 2A output 24W
- Cable length: 130cm
- RoHs, CE - High Quality

Mobile Charger 9V 2A USB-C 18W features:
- External power supply 220V to 9V / 2A 18W
- Plug type: USB C
- AC-DC adapter - 100-265V AC input, 50-60Hz
- 9V / 2A output 18W
- Cable length: 130cm
- RoHs, CE - High Quality

Car organiser - helps keep the boot tidy and therefore increases its capacity.

Resistencias 180 Ohm de tolerancia de 5%  y potencia de 0,25W. En el carbon film.

reComputer  J3011-Edge AI device with NVIDIA Jetson Orin™ Nano 8GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E and Key M slot, aluminium case, Jetpack system pre-installed with NVIDIA JetPack™ on 128GB NVMe SSD.

reComputer J4012-Edge AI Device with NVIDIA Jetson Orin™ NX 16GB module, 4xUSB 3.2, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPack™ on 128GB NVMe SSD

This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit does not include the micro:bit board.

This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit includes the micro:bit board.

APC220 433 MHz long range wireless modules with USB programming interface. The set provides wireless communication with a range of up to 1000 metres. Easy to configure solution for remote control of e.g. a robot.

GPIO breadboard extension board for Micro:Bit enables direct connection to the breadboard. The connection is very intuitive - you will have everything set up in seconds. It makes it easy to connect sensors and modules. An additional advantage of this board is the separate 5V and 3.3V supply pins. This makes it possible to use larger groups of sensors and modules.

USB A to Mini USB B cable 180cm

Colourful RGB Halo Light module for microbit, Arduino, Raspberry Pi. The module is equipped with 8 RGB LEDs and has three connection methods: alligator clip, DuPont cable and PH2.0 cable. Users can control it to turn into any colour by programming and achieve various lighting effects.

Wheels for 360 degree continuous rotation servo motors type SG90, FS90R, SG92r. The wheels have silicone tyres and measure 60 mm (2.36″) in diameter. Four additional mounting holes for 4-40 bolts allow the wheel to be used with several of our universal mounting bracket.