New products

Showing 121-180 of 448 item(s)

Solar Panel 6V 5W

Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame.

WV001

Price €19.95

Sonoff S26R2TPE - 3680W - WiFi Smart Plug

Sonoff S26R2 is the freshest version of an intelligent socket made for EU power standards. It is extremely user friendly - you only need to plug it in your socket and pair with your device and it should run! With the new version of the S26 socket, receivers with higher power consumption can now be connected - 3680W / 16A.

WS080

Price €15.99

Keyestudio Shield Sensors V2 micro:bit

Keyestudio Shield expansion board for the micro:bit. Allows connection to all outputs of the minicomputer via pin strip. Shield v2.0 for micro:bit incorporates 44-pin connectors to facilitate the connection of the various sensors to the minicomputer.

RA165

Price €9.45

USB GPS Receiver with 2m Extension Cable (Compatible with Raspberry Pi/ LattePanda/ Jetson Nano)

It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process.

RA160

Price €17.95

Grove Starter Kit for Seeed Studio BeagleBone® Green

This starter kit aims to quickly get you connected to Seeed Studio BeagleBone® Green. It contains 10 Grove modules and we provide you with 3 step-by-step projects to get you started quickly with all modules. The set comes in a handy box and is attractively priced!

SS040

Regular price €59.95 -€19.96 Price €39.99

Grove - Starter Kit for Arduino

The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want.

SS035

Regular price €66.95 -€8.00 Price €58.95

Gravity: IO Expansion Shield for Arduino V7.1

Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins.  Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules.

DF027

Price €14.95

Gravity: Analog TDS Sensor/ Meter for Arduino

Arduino compatible analog TDS (Total Dissolved Solids) sensor to measure water hardness, water purity. It can be used to test water quality in domestic, hydroponic and other applications. Measures TDS from 0 ppm to 1000 ppm. Power supply from 3.3V to 5.5V.

DF028

Price €15.99

Gravity: Starter Kit for Arduino

Gravity: Starter Kit for Arduino is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. The Gravity Kit presented here is equipped with numerous electronic components, such as a motherboard that works with the Arduino Uno - DFRduino Uno v3. DFRobot Gravity IO Expansion shield for Arduino is enclosed as well.

DF030

Price €95.95

Arduino Engineering Kit REV2

The Arduino Engineering Kit Rev 2 is a versatile and practical learning tool. By creating fun, real-world projects, you can understand basic engineering and mechatronics concepts and learn to program in MATLAB and Simulink. The versatility of the elements gives you the opportunity to adapt the content and create your own curriculum based on it. The kit includes online courseware, step-by-step instructions, lessons and exercises. It works best when studying in small groups.

AKX022

Regular price €289.95 -€15.00 Price €274.95

Jetson Nano Developer Kit (4GB) by NVIDIA

NVIDIA® Jetson Nano ™ Developer Kit is a small computer with powerful capabilities that allows you to run multiple neural networks in parallel for applications such as image classification, segmentation, speech processing and object detection. All this in an easy-to-use platform that runs on just 5 watts. Thanks to this board, the power of modern Artificial Intelligence is now available to Makers, students and embedded developers everywhere. Discover the power of AI and robotics with the powerful 4GB NVIDIA Jetson Nano Developer Kit. Now educators, students, and any enthusiast can easily perform AI projects quickly and efficiently using their GPU-accelerated NVIDIA software.

RA095

Regular price €239.99 -€21.00 Price €218.99

Solder fume extractor

The device absorbs the fumes generated during welding. Ideal equipment for school workshops, workplaces that use welders, eliminates the noxious fumes generated during work, which directly affect health, safety and comfort.

H0574

Price €44.90

Kit Raspberry Pi Zero W soldred - All in One

Raspberry Pi Zero W is a super small computer. This version includes WIFI, Bluetooth BLE 4.1 Pi Zero is the heart of a Raspberry Pi on a small 65mm x 30mm board. With mini-HDMI, micro-B OTG USB, and the same 40-pin GPIO, it still has a great connectivity. Raspberry Pi Zero 512MB RAM WIFI BLE 4.1. Supplied with a GPIO soldered connector.

RA156

Regular price €49.95 -€9.00 Price €40.95

reComputer J101 - Carrier Board for Jetson Nano

The reComputer J101 carrier board  is an NVIDIA Jetson Nano compatible support board, rich in cost and interface. It includes HDMI2.0, 2x USB 2.0, 1x USB 3.0, micro SD card slot, 2 xCSI, M.2 key E WIFI / BT, GPIO, I2C, I2S, Fan, and other rich peripheral interfaces. It has almost the same functional design and exactly the same size as the NVIDIA® Jetson Nano™ B01 Developer Kit carrier card.

RA155

Price €85.90

Pimoroni Pico Explorer Base

The Pico Explorer Base is an expansion board for the Raspberry Pi Pico, designed to teach circuit properties and allow you to perform science experiments, build small robots and inventions. The board includes functional components such as a mini prototyping board, motor drivers, ADC and GPIO cables, a speaker, a display with four usable buttons, switches and Breakout Garden rails for the expansion module.

PI046

Price €32.49

Pimoroni Pico Scroll Pack - White

The 17 x 7 rectangular matrix has a total of 119 white LEDs that can be controlled individually. A dedicated extension to the Raspberry Pi Pico. The device uses the 12C bus for communication and can be safely powered via the USB port.

PI044

Price €21.49

Pimoroni pHAT Stack - Solder kit

Can't stand to run out of pins in your Raspberry Pi? You have a cool new accessory but there's no way to plug it in? If you answered yes to any of the above, then this pHAT could be just for you. This piece has 6 sets of 40 GPIOS - one for your Pi and the rest (5) for your collection of HATs that you might want to plug in at the same time. Use it for a specific project or just to play with several HATs at once.  

PI045

Price €19.99

CMOS TTL logic tester

With the logic signal state tester it is possible to detect 0, 1, high impedance states. The indication reading is displayed by means of LEDs. The supply voltage is 5-15V.

K0556

Price €15.95

SONOFF S-MATE Switch Mate

Sonoff S-Mate works as a three-channel remote control, a transmitter that works with the Mini R3. Smart lights are disconnected when the switch is off? No neutral wire in the mounting box? Now S-MATE can help you solve this problem.

WS051

Regular price €8.49 -€1.00 Price €7.49

SONOFF MiniR3 Smart Switch

Smart lights are disconnected when the switch is off? No neutral wire in the mounting box? Now, S-MATE can help you solve this problem.

Sonoff Mini R3 - Wifi relay operated via the EweLink app, in combination with the S-Mate module can be used in installations without N-line

WS050

Price €11.99

TinyS3 - ESP32-S3 Development Board

TinyS3 is the latest in Unexpected Maker's popular range of "Tiny" development boards. It's packed with amazing features and peripherals, wireless connectivity, and stacks of Flash and PSRAM, all in the same tiny package size as the original TinyPICO!

W0122

Price €26.95

Power socket tester with RCD test function Uni-T UT07B-EU

The UT-07B-EU tester indicates the correct connection of L, N, PE cables in a socket. It also has a function to check the efficiency of residual current devices (RCD). The device is made of resistant plastic, which is very useful during installation work and ensures long-lasting correct operation. Attention! The RCD check is only possible if the phase is on the right-hand side.

H0564

Price €14.95

Digital Clamp Meters Uni-T UT202A+

The digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, with overload protection, high reliability, high safety and high accuracy. These meters can be used to measure high voltage frequency, AC/DC current, etc.

H0569

Price €34.95

SONOFF NSPanel PRO Smart Scene Wall Switch - HMI panel

NSPanel offers intelligent control of home appliances: lighting, thermostat, curtains, windows and wall switches. A colour touch screen with two buttons displays all the necessary information and allows you to conveniently navigate through the device's menu, making the Sonoff NSPanel the ideal control centre for your home. The NSPanel is designed to be mounted on the Sonoff switch frame (switch frame not included).

WS079

Regular price €109.95 -€3.00 Price €106.95

Temperature and humidity meter Uni-T UT333S

The UT333S is a digital temperature and humidity meter with stable, safe and reliable performance in a split design. The split design is ideal for monitoring small and difficult to access air ducts. Measure temperature and humidity in real time with the best UNIT technology!

H0361

Price €34.90

NFC-Tag

Do you want a faster way to control your SONOFF devices?  Now we have a solution for you. Tap the NFC tag with your phone to easily turn on the lights. You can use an NFC tag to control your SONOFF devices in a scene. Each NFC tag can be set to a smart scene. Peel off the NFC tag and stick it on the wall.  You can easily take it with you and use it wherever you want, or stick it on the wall so you can see it at a glance.

WS065

Price €4.99

MyoWare 2.0 Cable Shield

This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person.

SP045

Price €7.49

Tool box with handle, 330x175x150mm

Tool container with one compartment, suitable for small household items, DIY items or as a small first aid container. High impact polypropylene co-polymer material.

H0561

Regular price €8.95 -€0.96 Price €7.99

Component organizer for workshop / 16 drawers

Organise your resistors, capacitors, transistors and all kinds of electronic components in this practical organiser drawer with 16 compartments. It is perfect for workshops, garages and basements, with the possibility of hanging on the wall and linking with others.

H0559

Regular price €9.99 -€2.00 Price €7.99

SONOFF ZBBridge-P - Smart Zigbee Bridge Pro

The SONOFF ZigBee Bridge Pro is the heart of the smart home that allows you to remotely manage a variety of ZigBee devices and sensors to monitor and control the home. Compared to the previous version, the new ZBBridge-P allows the operation of up to 128 devices. In addition, it is equipped with an alarm control unit function. It is compatible with the new ZBMINI-L smart switch and S26R2ZB smart plug products, allowing you to easily automate your home.  Interact with all your Sonoff devices, both WiFi and ZigBee, thanks to this bridge.

WS078

Regular price €24.99 -€5.00 Price €19.99

LattePanda V1 - A powerful 2GB/32GB mini-PC

This is a LattePanda (DFR0444) with 2GB RAM and 32GB EMMC memory. The minicomputer is equipped with a 1.92 GHz Intel Cherry Trail Z8350 Quad Core processor. In addition, it has WiFi, Bluetooth 4.0, 2x USB 2.0, 1x USB 3.0, microSD slot, Ethernet port and an additional ATmega32u4 microcontroller with 20 GPIO pins known from Arduino. This version comes with Windows 10 installed, but does not include a Windows 10 activation key.

DF023

Regular price €152.40 -€12.00 Price €140.40