Power Supplies

Power Supply Transformer 220V AC/DC 2A 12V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 12V
- Output current: 2A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

Rechargeable battery XTAR 18650 2200mAh Li-ion features:
- With PCB protection circuit that protects the battery against overcharges and over discharges, increasing battery life
- Quantity: 1 unit
- Authentic Protection Battery

Power Supply Transformer 220V AC/DC 1A 9V features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 9V
- Output current: 1A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

Lithium Battery 3V CR2032 Button with PCB Pins features:
- 3V battery for horizontal mounting PCB printed circuit
- Quantity: 1 unit
- Diameter: 20mm
- Voltage: 3V
- Capacity: 220mAh

Power Supply Transformer 220V AC/DC 1A 5V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 5V
- Output current: 1A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

Power Supply Transformer 220V AC/12V DC 1A features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 12V
- Output current: 1A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: approx. 90 cm
- Indicator of operation: LED diode

Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh features:
- 9V Varta Industrial 6F22 Battery
- High quality, made in Germany
- Quantity: 1 unit

Characteristic:
- For long periods of storage it must be stored below 45 ° C
- After periods of Long storage will probably need to do a few charge cycles to increase capacity again
- Quantity: 1 unit
Precautions:
No Change polarity.
Do not heat the battery, or expose it to high temperatures.
Do not wet or expose to high humidity environments.

Mobile Charger 5V 3A 3100mA Micro USB 15W features:
- Raspberry PI Red Power Supply
- Charger for Raspberry Pi 2 and Pi 3, B and B +
- External 220V a 5V / 3.1A (3100mA) 15W
- Plug type: Micro USB
- Additional USB A socket
- AC-DC adapter - 100-265V AC input, 50-60Hz - Output 5V / 3.1A (3100mA) 15W
- Cable length: 130cm
- RoHs, CE - High Quality

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 2600mAh (discharge of 0.2C, 2.75V)
- Minimum capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.63V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1300mA, fast charge: 2600mA
- Charging time: standard charge: 3 hours, fast charge: 2.5 hours
- Max. Charging current: 2600mA (ambient temperature 25 °)
- Max. Discharge current: 5200mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.75V
- Cell weight: 47.0g maximum
- Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max.

Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: USB A, without cable
- Indicator of operation: LED diode

Rechargeable Battery XTAR 18650 2600mAh Li-ion features:
- With PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life
- Quantity: 1 unit

Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: micro USB
- Cable length 85cm

Panasonic rechargeable battery NCR18650B 3400mAh Li-ion 3,6V features:
- Nominal capacity: 3350mAh (0.2C, 2.5V discharge)
- Minimum capacity: 3250mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: CC-CV (constant voltage with limited current )
- Charging current: standard charge: 1625mA,
- Charging time: standard charge: 4 hours,
- Max. Discharge current: 6500 mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.5V
- Cell weight: 47.5g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum
- Operating temperature: charge: 0 to 45 ° C, discharge: -20 to 60 ° C

Power Supply Transformer 220V AC/DC 2A 9V features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 9V
- Output current: 2A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

Mobile Charger 5V 3A 3100mA  with connector USB-C. This power supply has an additional USB-A connector.

The official Raspberry 4 power supply with USB-C connector up to 3.1 A in white.

Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features:
IMPORTANT: This battery does not have a protection circuit.
Use it at your own risk.
Do not charge over 4.2V
Do not discharge below 3V
Do not change polarity
Do not heat the battery, or expose it to high temperatures
Do not wet or expose to environments of High humidity
For long periods of storage it should be stored below 45 ° C
After long periods of storage you will probably need to do some charging cycles to increase the capacity again.
Quantity: 1 unit
Nominal capacity: 2500mAh (0.2C, 2.75V discharge)
Minimum capacity: 2450mAh (0.2C, 2.75V discharge)
Charging voltage: 4.2 ± 0.05 V

Power Supply Transformer 220V AC/DC 2A 5V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 5V
- Output current: 2A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

Battery Varta Industrial AA - 4006 LR06 Mignon 1,5V- pack 4unds features:
- 1.5V Varta Industrial LR06 Battery
- High quality, made in Germany
- Quantity: 4 units

Power Supply Transformer 220V AC/DC 2A 15V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 15V
- Output current: 2A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm

Producto de calidad con certificación de "seguridad probada" de TÃœV Süd y CE, LPS.

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 3450mAh (0.2C, discharge of 2.5V)
- Minimum capacity: 3350mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1675mA,
- Max. Discharge current: 10A (ambient temperature 25 °)
- Charging time: standard charge: 4 hours,
- Discharge cut-off voltage: 2.5V
- Cell weight: 47g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum

Mobile Charger 5V 3A 3100mA USB-C 15W features:
- Raspberry PI Mains Power Supply
- Charger for Raspberry Pi 4
- External power supply 220V to 5V / 3.1A (3100mA ) 15W
- Plug type: USB C
- AC-DC adapter - 100-265V AC input, 50-60Hz
- 5V / 3.1 output A (3100mA) 15W
- Cable length: 130cm
- RoHs, CE - High Quality

3V CR1220 button lithium battery features:
- 3V battery
- Diameter: 12.5mm
- Voltage: 3V
- Capacity: 45mAh
- Quantity: 1 unit

Mobile Charger 5V 3A 3100mA USB-C 15W with switch on/off for Raspberry Pi 4.

features:
- Raspberry PI Mains Power Supply
- Charger for Raspberry Pi 4
- External power supply 220V to 5V / 3.1A (3100mA ) 15W
- Plug type: USB C
- Additional socket USB A
- AC-DC adapter - 100-265V AC input, 50-60Hz
- 5V / 3.1 output A (3100mA) 15W
- Cable length: 130cm
- RoHs, CE - High Quality

4x everActive R6 / AA 2000 mAh Ni-MH 1.2V rechargeable batteries features:
- Batteries in Blister
- Nominal capacity: 2000mAh
- Minimum capacity: 1900mAh - Nominal voltage: 1.2V
- Cell dimension: Height: 50.50 mm max
- Diameter: 14.50 mm max

Power Adapter 220VAC DC 5.1V, 3A USB-C features:
- Input voltage: 100 ~ 240V AC 50Hz
- Output voltage: 5.1V DC
- Output current: 3A
- DC connector: USB-C
- Cable length 80cm

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3500mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3500mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.6A
- recommended maximum discharge current 10A - maximum charging voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

Sonoff power supply for camera Sonoff GK-200MP2-B black (M0802050002) 5V 1.2A.

The 3.5x1.3mm plug is also popular, e.g. in USB HUBs, where it can also be used.

LITHIUM POLYMER BATTERY Battery LIPO 180mAh 3.7V features:
-Battery type-lithium polymer. -Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 180 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit Dimensions: -Length / depth of the battery- 20 mm -Battery width / diameter -31 mm It has three cables with a 3-pin connector with a separation of 2 mm. Wires: Red: positive. Black: negative. Yellow: thermistor output. The technical file: Battery LIPO.pdf

LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Wall charger with 2 USB ports with small size and low weight.

LITHIUM POLYMER BATTERY Battery LIPO 210mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 210 mAh. - Embedded PCM security chip (protection against overcharging, over discharge, short circuit) Dimensions: -Length / depth of battery- 25mm -Battery width / diameter- 31 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

A compact gadget with USB port, perfect for charging the batteries of mobile devices such as smartphones and tablets. The charger supports the most popular Quick Charge (QC 3.0 + QC 2.0) and VOOC fast charging technologies.

LITHIUM POLYMER BATTERY Battery LIPO 2650mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2650 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 71 mm -Width / diameter of the battery- 95 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Fast AC charger (EP-T1510NBEGEU). Features a USB Type-C port that allows charging up to 15W. Allows fast charging of devices, including Power Delivery and AFC standards. It is made of fireproof PC material. It has been equipped with many protections, such as overheating, overvoltage, high voltage or overcharging.

Multi-range switching power supply with output voltage regulation. It can generate output voltages of the following values: 3.0, 4.5, 6.0, 7.5, 9.0 or 12V.

LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Multi-range switching power supply with output voltage regulation. It can generate output voltages of the following values: 3.0, 4.5, 6.0, 7.5, 9.0 or 12V.

Specifications: Voltage: 6V
Capacity: 4.5Ah
Dimension
- length: 70mm
- width: 48mm
- height: 100mm
- total height (with terminals): 106mm
Weight: 0.71 kg Gel Battery 6V 4.5Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current:

Mobile Charger 9V 2A USB-C 18W features:
- External power supply 220V to 9V / 2A 18W
- Plug type: USB C
- AC-DC adapter - 100-265V AC input, 50-60Hz
- 9V / 2A output 18W
- Cable length: 130cm
- RoHs, CE - High Quality

Specifications: Voltage: 6V
Capacity: 3.3Ah
Dimension
- length: 134mm
- width: 34mm
- height: 60mm
- total height (with terminals): 67mm
Weight: 0.69 kg Gel Battery 6V 3.3Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current: - 0 ºC: 85%
- -15 ºC: 62%
Self discharge (25 ºC)
- capacity after 3 months of storage: 91%
- capacity after 6 months storage: 82%
- capacity after 12 months storage: 64%

Mobile Charger 12V 2A USB-C 24W features:
- External power supply 220V to 12V / 2A 24W
- Plug type: USB C
- AC-DC adapter - 100-265V AC input, 50-60Hz
- 12V / 2A output 24W
- Cable length: 130cm
- RoHs, CE - High Quality

Specifications: Voltage: 6V Capacity: 1.3Ah Dimension
- length: 96mm - width: 24mm
- height: 51mm
- total height (with terminals): 58mm
Weight: 0.31 kg Gel Battery 6V 1.3Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current: Capacity (25 ºC)
- 20 hour rate: 1.30Ah
- 10 hour rate: 1.24Ah
- 5 hour rate: 1.09Ah
- Rate 1 hour: 0.78Ah
Internal resistance (full charged battery, degree 25 ºC): 36 mOhm
Capacity affected by temperature
- 40 ºC: 102%
- 25 ºC: 100%
- 0 ºC: 85%
- -15 ºC: 62%
Self-discharge (25 ºC)

Wall charger with 2 USB ports - type A and type C. Complies with Power Delivery and Quick Charge 3.0 requirements.

Lead-acid battery made of AGM (Absorbent Glass Mat). Lead plates and high-quality electrolyte ensure the reliability of the power supply voltages that support most systems, such as UPS and emergency power systems.
Application: Alarm systems Cable television systems Telecommunications equipment Monitoring equipment Protection systems Medical equipment Ups Emergency Power Supply Toys
General Gel Battery 12V 2.3Ah Xtreme features:
Maintenance-free Design prevents leaks Watertight case Explosion safety valve protection High quality and reliability Extremely strong capacity recovery property Low self-discharge characteristics Can be installed in multiple positions

This USB adapter is a perfect wireless switch for controlling all kinds of devices, lights or charging your devices, from your mobile or your voice assistant such as Alexa or Google Home.

Sonoff Micro allows you to have intelligent control of your devices, as long as your mobile has a network, you can switch them on or off remotely from anywhere and at any time. You can automate routines by setting schedules for your devices, making your day-to-day life easier and more convenient. The free eWeLink application allows you to control your devices easily.

The batteries are manufactured on a modern production line. They have a gel-shaped electrolyte, so they are maintenance-free batteries. The batteries are designed to function as both shock absorbers and cyclic. They are characterized by their durability and a very favorable price-performance ratio. Gel Battery 12V 2.3Ah features:
> Long service life - both on the job and on the cyclic damper. No delamination effect of gelled electrolyte. Tolerates high operating temperatures. Fully returns to initial deep discharge volume. Very high performance. Capacity (Ah): 2,3 Nominal voltage (V): 12 LxAnxAl dimensions (mm): 177x33x60 Gross weight: 0.96

The batteries are manufactured on a modern production line. They have a gel-shaped electrolyte, so they are maintenance-free batteries. They are characterized by their durability and a very favorable value for money. Gel Battery 12V 0.8Ah features:
Long service life-both on the job and on the cyclic damper. No delamination effect of gelled electrolyte. Tolerates high operating temperatures. Fully returns to initial deep discharge volume. Very high performance. Capacity (Ah): 0.8 Tensi Nominal ion (V): 12 LxAnxAl dimensions (mm): 96x28x61 Gross weight (kg): 0.32

Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use features:

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3000mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3000mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.5A
- recommended maximum discharge current 4.5A
- maximum charge voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

Lithium polymer battery 3.7 V with the capacity of 590 mAh. Includes PCM safety chip (protection against overcharge, over-discharge, short circuit).

Battery terminal type-3 wires.

Battery voltage-3.7 V

Battery capacity- 590 mAh.

Gel Battery 12V 7Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Gel Battery 6V 4Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Gel Battery 12V 1.2Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Nickel strip in the shape of a square plate to join 4 poles of 4 welded batteries with connection projection. Tape sheets, lithium battery welding.

Nickel tape to join the battery poles welded with connection projection. A roll of 1kg / 260m.

Nickel tape to join the battery poles welded with connection projection. A roll of 1kg / 105m.