4WD Robot Smart Car Chassis 4x Wheels DIY Ideal for building a car with obstacle detector, light follower.Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included). 4WD Robot Smart Car Chassis 4x Wheels DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Dimensions of the wheel: diameter 65mm - width 26 mm Code R0004 Available Regular price €15.89 -€3.00 Price €12.89
DC Circular Electromagnet 12V 2kgf 3W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 2 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0006 Available Price €8.49
Speed controller for DC motor (PWM) 10V-30VDC 120W 5A 10A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 10-30VDC, - Max continuous output current: 5A (peak current 10A), - Max power: 120W, - Dimensions: 61x27.9x45.7mm, - PWM frequency: 16kHz, - Adjustable duty cycle: 5% -100%, - Integrates a regulator L7805CV TO- 220, - Incorporates a 10A fuse to protect the power circuit. Please note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0088 ✗ Out-of-Stock Price €8.49
Electric Door Lock 12V DC Electromagnetic Solenoid Easy to install for the electric door lock or other automatic door lock systems with the mounting board. Code M0218 Last items in stock Regular price €9.95 -€1.00 Price €8.95
Set of flat transmission belts - width 3.0mm A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick. Technical data: - width: 3.0mm - diameter from 27mm to 80mm - thickness: from 0.5 to 1mm Quantity tolerance +/- 5% Code H0177 Available Price €3.90
SOLAR AND HYDRAULIC ROBOT - 12 in 1 - KSR17 Educational Toy Solar and hydraulic educational robot kit 12 in 1. Have fun building and learning with this robot about solar energy and mechanical movement by means of a hydraulic system (by water). Try mounting its 12 different versions with just one kit as shown in the pictures. Perfect for children aged 8 and over to develop motor skills and reasoning. Code VE001 Last items in stock Price €34.90
SPACE EXPLORER ROVER SOLAR - KSR14 Educational Toy Solar educational robot explorer kit. Have fun building and learning with this robot about solar energy and the mechanical movement of its motor and wheels. Perfect for children 8 years and older to develop motor skills and reasoning by directly observing the movement of gears. Code VE002 Available Price €29.99
M3 Hexagonal Spacer 25mm Male - Female Brass Characteristic: -Metric thread M3 -Male-Female separator 25mm -Quantity: 5 units Code H0048 Available Price €0.45
Mini VNH3SP30 Stepper Motor Driver Module 30A Mini VNH3SP30 Stepper Motor Driver Modules capable of handling a high consumption motor. Code R0020 ✗ Out-of-Stock Price €4.85
Speed controller for DC motor (PWM) 12V-40VDC 0.01-400W 8A 10A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 12-40VDC, - Max continuous output current: 8A (peak current 10A), - Control power: 0.01- 400W, - Dimensions: 60x75x28mm, - PWM frequency: 13kHz, - Static current: 0.02 A (Standby), - Adjustable duty cycle: 10% -100% , - It integrates a L7812CV TO-220 regulator, - It incorporates a 10A fuse to protect the power circuit. Note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0089 Available Price €7.95
Acrylic robot 4 DOF arm full educational Kit (arm, servo, board,etc) The complete 4 DOF robotic arm kit ideal for beginners and educational environments. The kit contains a small and simple 4-axis robot arm together with the components to start robotic projects. Includes arm, 4 servos, UNO board and joysticks for control. Perfect kit to learn and teach robotics in an easy way, as you can build it with the instructions in the description in less than an hour and ready to control the arm with a development board and simple program! Compatible with Arduino. Fully programmable. Code R0089 Available Regular price €52.77 -€1.35 Price €51.42
Set of flat transmission belts - width 4.0mm A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick. Technical data: - width: 4.0mm - diameter from 27mm to 80mm - thickness: from 0.5 to 1mm Quantity tolerance +/- 5% Code H0178 ✗ Out-of-Stock Price €4.40
MECHANICAL ADJUSTABLE ROBOT - 5 in 1 - KSR19 Educational toy Educational robot kit ideal for developing STEM skills and learning by playing. Build and learn with its 5 different modes in one kit Perfect for children 12 years and older to develop programming, motor, cam mechanics and motion transmission skills. This educational toy has been designed to inspire future apprentices and lovers of mechanical engineering and/or programming. Code VE003 Last items in stock Price €39.90
L298N Motor Drive Controller Board Module Dual H Bridge DC It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. L298N Motor Drive Controller Board Module Dual H Bridge DC features: - Minimum operating voltage: 5 V- Maximum operating voltage: 35 V- Maximum current: ± 2 A- Logic voltage: 5V- PWM signal inputs for speed control- Outputs: for 2 DC motors or for a bipolar stepper motor- Measures: 43x43x24 mm Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles Code M0100 Available Price €2.79
DC Gear Motor 6V 1:48 for Arduino DC Gear Motor 6V 148 Arduino features:- Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Reduction: 1:48 Code R0008 Available Regular price €1.90 -€0.41 Price €1.49
Speed controller for DC motor (PWM) 6V-30VDC 300W 10A 20A Ideal to control the speed of DC motors. Characteristic: - Input voltage: 12-40VDC, - Max continuous output current: 10A (peak current 20A), - Max power: 300W, - Dimensions: 60x28x50mm, - PWM frequency: 21kHz, - Static current: 0.02 A (Standby), - Adjustable duty cycle: 5% -100%, - Adjustable speed range: 0% -100%, - It incorporates a 20A fuse to protect the power circuit. Please note that the voltage applied to the motor will be the supply voltage applied to the circuit. Code A0090 Available Price €9.95
TOBBIE, The intelligent assembly robot - KSR18 Educational toy A nice looking educational robot kit with which to learn the basics of mechanics. Have fun assemblying and learning with this robot about energy and mechanical movement using a mechatronic system with articulated legs and waist. It has two modes: exploration and tracking. Perfect for children of 7 years or more to develop motor skills and reasoning. Code VE004 Last items in stock Price €39.90
VNH3SP30 Stepper Motor Driver Module 30A Driver capable of handling up to two high consumption motors.We can weld 5mm screw terminals (not included), making it easy to connect other gauge cables. Code R0010 Last items in stock Regular price €15.58 -€2.50 Price €13.08
Mclon Car Chassis 2x DIY Wheels Ideal to build a car with an obstacle detector, light follower Characteristic: - Voltage: 3 to 6Vdc - No load speed: 100 RPM to 6Vdc - No load current: 90mA to 3Vdc - 180mA to 6Vdc - Wheel dimensions: diameter 65mm - width 26mm The kit includes: - aluminum platform - 2x wheels and 2x motors - 1x idler wheel - screws Code R0078 Available Price €23.95
DC Gear Motor N20 200 RPM 12V DIY Robot DC Gear Motor N20 200 RPM 12V DIY Robot features: - Voltage: 12V- Speed of rotation: 200RPM- Motor dimensions:* Diameter 12 mm* Height 24 mm- For Arduino, Smart Car, Robotics, Fans, Appliances Code R0035 Available Regular price €5.90 -€1.00 Price €4.90
Mclon Kit ProtoShield DIY The mClon kit is ideal for building a car with obstacle detection and light tracking. In addition to the platform, the kit contains the basic essentials for building your first robot including the Arduino Uno compatible board, distance sensors and many other components. Check the complete list in the product description Code R0085 Available Regular price €56.24 -€17.24 Price €39.00
TOBBIE II, The intelligent riding robot with micro:bit - KSR20 Educational toy A nice looking educational robot kit that includes the micro:bit development board, with which to learn the basics of mechanics and programming. Have fun riding, programming and learning with this robot about energy and mechanical movement using a mechatronic system with articulated legs and waist. It is a small hexapod robot (six legs) that works in many ways: explorer, follow me, sing and dance, follow the light, move it with your mobile and many more! You can also continue to create different projects with the loose plate. This educational toy has been designed to inspire future apprentices and lovers of mechanical engineering and/or programming. Code VE005 Last items in stock Regular price €99.95 -€10.00 Price €89.95
Continous Rotation 360 Degree Servo S3003 Continous Rotation 360 Degree Servo S3003 features: - Operating voltage: 4.8 V to 6 V- Torque max.: 4.1kg / cm (6V)- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)- Radio max.: 360º- Temperature range: -20º + 60ºC degrees- Weight: 38 g- Cable length: 26cm- Dimensions: 40.5 x39x 20 mm- Servo connector: JR- Chinese manufacture Code R0019 Available Regular price €7.95 -€0.96 Price €6.99
Micro Digital Servo Right Symmetry 1.5g 4.8V This right symmetry micro digital servo is of excellent quality and very light weight. Its high speed and rotational capacity is great advantage to develop sensitive projects with quick response. Characteristic: - Symmetry of the servo: for incorporation to the right - Plug: 1- red wire: positive polarity (+) 2- black wire: negative polarity (-) 3- white wire: control signal - Model: GS-1502 - Type: Analog Servo - Rotation angle: 180 ° - Torque: - 0.20kg / cm if Vin = 4.8V - 0.24kg / cm if Vin = 6V - Speed: - 0.11sec if Vin = 4.8V - 0.09sec if Vin = 6V - Operating voltage: 3.7V-5V - Material type: Nylon - PCB size: 21x15x12 mm Code F0002 Available Price €8.49
Micro Servo Compatible with MG90S Micro Servo Compatible with MG90S features: - Operating voltage: 4.8Vdc (5V) or 6Vdc - Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V - Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V - Gear type: metallic - Turning width: 180º - Temperature working: from -30 to 60 ºC - 3 plastic propellers / arms - Fixing screws - Size: 22.6 x 11.8 x 31 mm - Weight: 13.4 gr Code R0015 Available Price €3.99