Contented:
- 1x UNO R3 Atmega 328P 16U2 Compatible with Arduino
- 1x CNC Shield V3
- 4x A4988 Drivers
- 4x Heatsinks for A4988
- USB Cable
- Jumpers

Starter kit with the UNO R3 module sensors in a box for Arduino.
Compatible with Arduino
It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module
- 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x USBASP Programmer Adapter Cable Atmega8 Atmega128 AVR
- 5x Push Switch Button B3F Omron Yellow Key
- 1x Linear 5K Potentiometer OHM kΩ

The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use.

The USB (Universal Serial Bus), is an industrial standard bus that defines the cables, connectors and protocols used in a bus to connect , communicate and supply power between computers, peripherals and electronic devices.
This female type B USB connector adapter soldered on a PCB board is ideal for use in your projects.
It has connection points where you can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
USB Type B Female 2.0 Connector Adapter with PCB features:
- Connector type: USB Type B Female,
- Internal color: White,
- Nominal voltage: 30v DC,
- Maximum current: 1A DC,
- Insulation resistance: 1000Mohm,
- Operating temperature: -25ºC to + 85ºC,

Varta CR123A 3V lithium photography battery.

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:
> - Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation - Edge enhancement
- Noise level

Driver capable of handling up to two high consumption motors.
We can weld 5mm screw terminals (not included), making it easy to connect other gauge cables.

This module works under the characteristics of the integrated ISD1820 and allows you to make recordings of multiple messages or the reproduction thereof, it performs a non-volatile storage. Voice Recording and Reproduction Module ISD1820 features:
- Working voltage: 2.4 - 5.5 VDC
- Model: I073103
- Voice Recorder Chip ISD1820
- Automatic ignition mode dwon
cording duration: 8-20 seconds
- Manual or Automatic Control with an MCU
- With internal audio amplifier, this board can drive 8 ohm 0.5W speaker directly
- Includes a microphone on board to record directly
- The sampling frequency and duration can be different if a single module resistance is changed
- High quality, restored natural voice, can be used as a speaker module

Voltmeter LED Waterproof Digital Display DC Blue 3.5V 30V DC 0.56 features:
- Measuring range: from 3.5 VDC to 30 VDC ±% 1
- Operating current: <30mA
- Measuring refresh time: 500ms
- Dimensions: 54mm x24mm x15mm
- Cable length: 85 mm
- Color: Black
- Display: Blue LED
- Operating temperature: -10ºC to 65ºC

Voltmeter LED Waterproof Digital Display DC Green 3.5V 30V DC 0.56 features:
- Measuring range: from 3.5 VDC to 30 VDC ±% 1
- Operating current: <30mA
- Measuring refresh time: 500ms
- Dimensions: 54mm x24mm x15mm
- Cable length: 85 mm
- Color: Black
- Display: Green LED
- Operating temperature: -10ºC to 65ºC

W1209 DC 12V Thermostat + Transparent Box Temperature Controller features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50-110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measure accuracy: 0.1 ° C
- Refresh rate: 0.5s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Output power: 10A relay
- Probe sensor: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 ° c Humidity 20% -85%
- Dimensions: 48 x 40mm

IP66 Waterproof Infrared HD digital camera.
Waterproof RS232 IP66 HD Camera features:

- Supply voltage: 5 VDC,
- RS232 serial connection,
- Protection index: IP66,
- Includes a female SUB-D9 connector,
- Latest digital signal processing technology,
- Image stabilization technology,
- Automatic adaptation to digital noise reduction,
- HD PTC01 color infrared camera,
- Color: silver.

Learn how to weld in the most fun and useful way with this luminous Christmas tree. Follow our practical and simple guide step by step, and decorate your home with this flashing Christmas tree. Soldering is an essential technique in electronics and what better way to learn than with this specially prepared kit. Includes soldering iron, tin, pliers, desoldering iron, sponge, support and tree kit. Soldering kit comes in a practical and convenient case box.

Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips features:
- Pyrography type pencil, with 6 replacement tips with different shapes and thicknesses. Ideal for carpentry and joinery
- Can be used on different materials, the most common are wood, leather and rubber, but can also be used with other materials
- Number of nozzles: 6 units
- Power: 30W
- Voltage: 220-240V
- Caution: do not touch the tip of the pyrograph while it is hot. Change the mouthpiece with tweezers or wait for it to cool
- Certifications CE, RoHS, LVD

This Step-down voltage converter includes 5 functions in one module. It can be used as a voltmeter, ammeter and measurements can be recovered through its USB port.
The output voltage and voltage can be adjusted thanks to two potentiometers present in the module.
It has an efficiency Very high, it has a display screen for voltage, current and two buttons to configure what you want to see. Characteristic: - Voltage of input: 5.5 - 36 V
- Output voltage: 1.25-32 V continuously adjustable
- Output current: 4.5 A (Max 5A for a short time) adjustable with potentiometer,
- Power output: 75 W maximum (recommended to use 50 W, large pressure difference, please reduce power)
- Operating temperature: -40 ° C - + 150 ° C

Yellow 3D-pen for ABS / PLA filaments features:
This 3D pen is suitable for 1.75m ABS or PLA filaments.
It includes an LCD screen that allows you to read the temperature, speed and filament.
It also comes with button controls to control the extrusion speed.
You can use this powerful 3D pen to draw, draw or trace objects on the paper. Yellow 3D-pen for ABS / PLA filaments features:
- Input voltage: 12V,
- Current consumption: 2A,
- Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable,
- Pen color: yellow,
- Random color filaments,
- Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A,
- Recommended for adults and children 8 years and older.

ZD-8906 Digital Soldering Station 30W features:
- For general electronics and repairs
- High potency ceramic resistance that provides a fast recovery of temperature
- Soldering iron holder
- Heating element for soldering iron: 30W
- Resistance: Ceramic
- Temperature: 160 °C - 550 °C
- Power: 220-240Vac
- Certifications CE, RoHS, LVD