300cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 300cm
- Quantity: 1 unit

3V CR1220 button lithium battery features:
- 3V battery
- Diameter: 12.5mm
- Voltage: 3V
- Capacity: 45mAh
- Quantity: 1 unit

The CR2032 20mm diameter 3V button cell lithium battery from Maxell. It has a capacity of 220mAh. Original - Made in Japan - batteries made in Japan.

Ideal for building a car with obstacle detector, light follower.
Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included). 4WD Robot Smart Car Chassis 4x Wheels DIY features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Dimensions of the wheel: diameter 65mm - width 26 mm

500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 500cm
- Quantity: 1 unit

5mm copper tape

Conductor features: material copper foil, size: 5 mm x30 m, copper foil thickness: 0.05 mm, conductive, adhesive, approx length: 30m. Applications:
 EMI and RF shielding, paper circuits, soldering, electrical repairs, slug repellent.

600W Boost Converter Booster Module DC voltage 12V to 80V features:
- Input voltage: 10V-60V
- Output voltage: 12-80V (adjustable)
- Output current: 10A
- Input current: 15A maximum
- Output power: 600W maximum
- Conversion efficiency: up to 95% (input 30V, output 40V 5A 93%)
- Wiring: solderless terminal
- The minimum difference between the output and input voltage: 2V
- The ambient temperature exceeds 40 ° C, increase the dissipation of heat
- Short circuit protection: If between reverse polarity protection: None
- Size: 85 x 63 x 64 mm
- Weight 275g
Applications:

Lot of 65 Male-Male jumper cables. Characteristic: -No soldering required
-You can easily modify or revise the circuits
-Quantity: 65 cables of different lengths and colors
-Cable lengths: 120mm, 150mm, 200mm, 240mm

HDMI TFT LCD screen for Raspberry Pi included in a complete package (adapters, stands, cables) for a compatible connection very easy with the Raspberry Pi.
7 inch TFT LCD 1024x600 for Raspberry Pi controller kit features:

The 8in1 Pen Screwdriver is a practical set containing 8 straight and Phillips screwdrivers for screwing and unscrewing various screws. The screwdriver is equipped with a detachable tip in which all the bits are stored.

Weight: 12.5g
Box size: 65 * 32 * 14mm

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box for Raspberry Pi 4 model B features:
- clear acrylic case x 1 pcs. - mounting screw x 1 set Note: Raspberry Pi board, LCD screen is not included.

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. 

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box with fan for Raspberry Pi 4 model B features:
- clear acrylic case x 1 You. - 5Vdc fan - mounting screw x 1 set Note: The Raspberry Pi board is not included.

Acrylic panel for Arduino Uno with a very simple structure with rubber feet. After assembly with the 400 points breadboard, the assembly looks professional and elegant.

The complete 4 DOF robotic arm kit ideal for beginners and educational environments. The kit contains a small and simple 4-axis robot arm together with the components to start robotic projects. Includes arm, 4 servos, UNO board and joysticks for control.

Perfect kit to learn and teach robotics in an easy way, as you can build it with the instructions in the description in less than an hour and ready to control the arm with a development board and simple program! Compatible with Arduino. Fully programmable.

This is a CH340G TTL UART 5V serial adapter, designed to allow adding a USB connection to your project.
In addition, this opens up the possibility of programming microcontrollers like the Arduino Pro mini.
This module allows you to connect your project, from programming small microcontrollers to a custom computer keyboard.
The module is ready for use of a UART connection.
This may require the installation of a driver; however, it is a standard driver distributed by Microsoft Windows Update, available in Linux and that can be configured in MAC OS.
Adapter module CH340G LC Technology -TTL UART 5V series features:
- Manufacturer: LC Technology,
- Communication chipset: CH340G
- Communication: UART,
- Pin connection:

Adjustable mounting bracket for laser diode that has a plate with holes to securely fix it to any surface.
It also has a screw to fix the laser diode and is adjustable in inclination, to obtain the perfect orientation of the diode. It can be used to support any object other than a laser diode that has a lower or equal diameter to the support.

Adventurer3 is the best choice for families, education, workshops and 3D printing beginners. The user-friendly interface design and powerful, easy-to-use functions make 3D printing easy.With a compact, enclosed printing chamber, Adventurer3 is lightweight and portable.

Producto de calidad con certificación de "seguridad probada" de TÃœV Süd y CE, LPS.