White Housing for Raspberry Pi 2, Pi3, Model B, B+ White Housing for Raspberry Pi 2, Pi3, Model B, B+ features: - White shell case - Housing for Raspberry Pi2 and Pi3, B and B + - The color white - Made of ABS - Dimension: 95x 62x 26mm. Code RA001 Available Price €2.70
7 inch TFT LCD 1024x600 for Raspberry Pi controller kit HDMI TFT LCD screen for Raspberry Pi included in a complete package (adapters, stands, cables) for a compatible connection very easy with the Raspberry Pi. 7 inch TFT LCD 1024x600 for Raspberry Pi controller kit features: Code RA036 Available Regular price €45.99 -€4.00 Price €41.99
Black Housing for Raspberry Pi 2, 3, Model B, B+ Black Housing for Raspberry Pi 2, 3, Model B, B+ features: - Black Case Shell Box - Housing for Raspberry Pi2, Pi3, B and B + - Color: Black - Made of ABS - Dimension: 95x 62x 26mm Code RA002 Available Price €2.70
Transparent housing for Raspberry Pi 2, Pi3 Model B, B+ Transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features: - Case Case Shell Box - Housing for Raspberry Pi 2 and Pi 3, B and B + - Transparent color - Made of ABS - Dimension: 95x 62x 26mm Code RA003 Available Price €2.70
LED Matrix 16x8 red MAX7219 Waveshare for Raspberry Pi Voltage sensor module 0.02445V ~ 25V directly connectable with any version of Raspberry Pi. LED Matrix 16x8 red MAX7219 Waveshare for Raspberry Pi features: - Manufacturer: Waveshare - LED Array: 16x8 - LED Driver: MAX7219 - Voltage operating: 5V - SPI communication - Output connector: supports any revision of Raspberry Pi (directly connectable) - Dimensions: 6.43 × 3.50 × 2.65cm. Code RA034 Available Regular price €8.99 -€1.00 Price €7.99
Aluminium Adhesive Heatsink pack 3pcs Kit 3x Aluminium Dissipative Adhesive features: - For Raspberry Pi 2 and Pi 3, B and B + - Heatsink includes thermal sticker - 1x aluminum heatsink for the microprocessor - Dimension: 14x14x5mm - 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator - Dimension 9x9x4mm - Quantity: 3 units Code RA005 Available Price €1.29
10.1 inch TFT LCD 1024x600 for Raspberry Pi controller kit HDMI TFT LCD screen for Raspberry Pi included in a complete package (adapters, stands, cables) for a compatible connection very easy with the Raspberry Pi. 10.1 inch (16:9) TFT LCD 1024x600 for Raspberry Pi controller kit features:Screen type: 1024 (R + G + B) * 600 dots LCD type: a-SI, Positive, Transmissive Display direction: 60 o'clock. Backlight: white LEDs. Interface: LVDS Operating temperature: -10ºC - + 60ºC. Active area: 222.72 x 125.28 mm. Code RA080 ✗ Out-of-Stock Price €78.99
Copper Adhesive Dissipator For Raspberry Pi 2 and Pi 3, B and B +. The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm - Quantity: 1 unit Code RA006 Available Price €1.49
10.1 inch IPS TFT LCD 1280x800 for Raspberry Pi controller kit HDMI IPS TFT LCD screen for Raspberry Pi included in a complete package (adapters, cables) for a compatible connection very easy with the Raspberry Pi. Code RA082 Last items in stock Price €99.99
Flat Cable GPIO 40 Pins M/F Flat Cable GPIO 40 Pins M/F features: - For Raspberry Pi 2 and Pi 3, B and B + - Total length 20cm - Quantity: 1 unit Code RA007 Available Price €2.85
7 Inch Full View LCD TFT Touch Screen 1024x600 HD HDMI Display Monitor 7inch HD TFT LCD touch screen can be used as general purpose HDMI monitor. You can connect it with a computer HDMI as the sub-display. Code RA083 Available Price €86.90
Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) Grey Flat Cable GPIO 40 Pins M/F Raspberry Pi (RPi2, RPi3, B and B+) features: -Length: 25cm -Quantity: 1 unit -Female connectors at both ends -High quality and good working condition -easy to install and use Code RA008 Available Price €2.95
7 Inch Full View LCD TFT Screen 1024x600 HD HDMI Display Monitor 7inch HD TFT LCD screen can be used as general purpose HDMI monitor. You can connect it with a computer HDMI as the sub-display. Code RA084 Available Price €75.90
50cm HDMI V1.3 Male to Raspberry PI 1080P Gold Silver 50cm HDMI V1.3 Male to Raspberry PI 1080P Gold Silver features: - For Raspberry Pi 2 and Pi 3, B and B + - HDMI V1.3b cable and full 1080P (category 2) resolution - Type A male at both ends - High quality gold shielded connectors - Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality - Refresh rates up to 120Hz - Length: 50cm - Quantity: 1 unit Code RA009 Available Price €1.69
7 inch Smart LCM DGUS 800x480 DMT80480T070-09WN 7-inches Smart LCM DGUS 800x480 DMT80480T070-09WN DWIN. Operating temperature: -30ºC - + 70ºC. DGUS is the abbreviation of a Graphic Application Service Software from DWIN Technology. It is an intelligent GUI software completely innovated by DWIN Technology.It is mainly designed for MCU users to quickly develop high-reliability full-graphics, touch screen HMI interface. It has the characteristics of simple development, flexible UI design, no operating system, fast running speed, strong reliability and stability. According to the application environment, it is divided into simple application grade, commercial grade, industrial grade, medical grade, military grade and automotive grade. Code RA090 Last items in stock Price €130.00
DS3231 Precision RTC Real Time Clock Module AVR ARM DS3231 Precision RTC Real Time Clock Module AVR ARM features: - Can be used in projects of Arduino, Raspberry Pi, PIC, AVR- Function compatible with the DS 3231- Power supply voltage: +2.3 V to +5.5 V- Temperature range: -40 ° C to + 85 ° C- Low energy consumption- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation- Two alarm calendar- Interface: I2C Code RA011 Available Price €2.95
10.1 inch IPS TFT LCD 1366x768 for Raspberry Pi controller kit HDMI IPS TFT LCD screen for Raspberry Pi included in a complete package (adapters, cables) for a compatible connection very easy with the Raspberry Pi. Code RA086 Last items in stock Price €114.99
VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features: > - Input voltage 2.5V-3V - Operating power 60mW / 15fps VGA YUV - Resolution VGA 640x480 pixels (30fps) - Maximum frame rate 30fps VGA - Flicker 50Hz / 60Hz automatic detection - Lens size 1/6 " - Angle of view 25 ° - Sensitivity 1.3V / (lux- seg) - SCCB (Serial Camera Control Bus) interface - Output format · 8 Bits - YUV / YCbCr 4: 2: 2 - RGB 565/555/444 - GRB 4: 2: 2 - RAW RGB data - High sensitivity Light operation - Automatic adjustment - Color level saturation - Edge enhancement - Noise level Code M0103 Available Regular price €5.79 -€1.00 Price €4.79
VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out). The interface is very easy to use because all operations are controlled by the internal DRAM memory controller. VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features: - Input voltage: 2.5V-3V - Controller: AL422B FIFO buffer - Operating power: 60mW / 15fps VGA YUV - VGA resolution: 640x480 pixels (30fps), - Maximum frame rate: 30fps VGA - Flicker: 50Hz / 60Hz auto detection - Lens size: 1/6 " - Angle of view: 25 ° - Sensitivity: 1.3V / (lux- sec) - SCCB (Serial Camera Control Bus) interface - Output format: 8 Bits - YUV /> Code M0114 Available Price €14.59
10.1" Diagonal - 1280x800 IPS HDMI/VGA/AV Display (Compatible with Raspberry Pi & LattePanda) This 10.1-inch high resolution 1280*800 IPS is specifically designed as a monitor for LattePanda (which can be used as a Windows 10 on-board development), Raspberry Pi and other mini PCs. HDMI/VGA/AV interfaces ensure its wide compatibility. Code RA157 Last items in stock Price €159.99
Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €6.85
T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin T-Cobbler Protoboard Extension Plate GPIO 40 Raspberry PI B+ Pin features: - Shield expansion module for Raspberry Pi 2 and Pi 3, B and B + - Dimension: 6 x 7.3x 1.9mm Code RA004 Available Price €2.99
5'' 800x480 TFT Raspberry Pi DSI Touchscreen for Raspberry Pi This is a 5" Raspberry Pi LCD touch screen with a resolution of 800*480 and a display area of 108×64.8mm. The product is compatible with Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points. Compatible with Raspberry Pi 3B/3B+/4B. Code RA158 Last items in stock Price €69.99
T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features: - Shield to connect with breadboard - Dimension: 6 x 7.3x 1.9mm - Flat cable female / female 40 pins - Total length: 25cm - Quantity: 1x shield 1x flat cable Code RA010 Available Price €5.94
7'' 800x480 TFT Raspberry Pi DSI Touchscreen for Raspberry Pi This is a 7" Raspberry Pi LCD touch screen with a resolution of 800*480 and a display area of 154.8 x 85.92mm. The product is compatible with Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points. Compatible with Raspberry Pi 3B/3B+/4B. Code RA159 Last items in stock Price €75.99
Mobile Charger 5V 3A 3100mA Micro USB 15W Mobile Charger 5V 3A 3100mA Micro USB 15W features: - Raspberry PI Red Power Supply - Charger for Raspberry Pi 2 and Pi 3, B and B + - External 220V a 5V / 3.1A (3100mA) 15W - Plug type: Micro USB - Additional USB A socket - AC-DC adapter - 100-265V AC input, 50-60Hz - Output 5V / 3.1A (3100mA) 15W - Cable length: 130cm - RoHs, CE - High Quality Code RA014 Last items in stock Price €10.99
RGB full-color LED matrix panel 64x32 pixels RGB full-color LED matrix panel, 2.5mm Pitch, 64x32 pixels, adjustable brightness. At dusk, the dazzling neon lights of the streets and alleys illuminate the entire city, making it more dynamic. It's clear that the colour LED matrix panel plays an important role. Whether outside shops, on the bus or in a taxi, you can always see animations or advertising videos. Sounds great, why not give it a try? Provides open source development resources for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino. Code WV004 Available Price €29.99
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
10.1-inch 1280 x 800 IPS touchscreen, HDMI for Raspberry Pi 4/3b+ Win7/8/10/11 The 10.1-inch touchscreen with HDMI adapters will be fully compatible with Raspberry Pi mini PC, Banana pi, BeagleBone and Windows 10/8/7 PC, Mac, Microsoft, TV. 1280*800 IPS LCD capacitive touchscreen, up to 10 touch points. Tempered glass design, hardness up to 6H, scratch resistant, durable. Code RA178 Available Price €95.99
Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features: - Interface type: USB - Supports IEEE 802.11e draft 802.11n - Supports USB 2.0, compatible with USB 1.1 and 1.2 - Support systems: - Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux - Operating distance: 91 meters indoors, 275 meters in open space - Transfer rate: 150Mbps (downlink) and 150Mbps (uplink) - Works with old Wireless-G and Wireless-B networks - WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM - Frequency range: 2.4 to 2.4835 GHz - Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment - Transmission mode: DSSS Code RA015 Available Regular price €8.49 -€2.00 Price €6.49
Raspberry Pi 2-3 Model B Multifunction Expansion GPIO Module This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included. The module offers a set of mini jumpers to configure the GPIO. Code RA016 Available Price €7.95
Acrylic Box with Fan and Screws for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. Code RA017 Available Regular price €7.50 -30% Price €5.25
Kingston Class 10 MicroSD 8GB Memory Card Kingston Class 10 MicroSD 8GB Memory Card features: - SDHC Class 10 UHS-I (SDC10G2 / 8GBSP) for Raspberry - Capacity: 8Gb - Class: 10 - MicroSD dimensions 11mm x 15mm x 1mm - FAT32 format - Service temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3V Code V0010 ✗ Out-of-Stock Price €6.95
Toshiba Class 10 16GB MicroSD Memory Card Toshiba Class 10 16GB MicroSD Memory Card features: - Capacity 16GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 Code V0011 Backorder Price €7.90
Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector features: - Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 5V- Output current: 2.5A- DC connector: USB A, without cable- Indicator of operation: LED diode Code A0083 Available Price €4.99
Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector features: - Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 5V- Output current: 2.5A- DC connector: micro USB- Cable length 85cm Code A0084 Available Price €4.99
Raspberry Pi 3 Model B+ 1.4GHz 64-Bit Quad Core Processor LAN 4.2/BLE The Raspberry Pi 3 Model B+ is the penultimate product in the Raspberry Pi 3 range. It is the significant evolution in board performance compared to Raspberry Pi 3 B with the increase in processor frequency from 1.2 GHz to 1.4 GHz. Compared to serial 2 the board offers standard 802.11 b-g-n and bluetooth BLE 4.1 connectivity. Code B0045 ✗ Out-of-Stock Price €62.00
3.5 inch LCD TFT Acrylic Case for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case Code RA018 Available Regular price €4.40 -25% Price €3.30
Black Box for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. Black Box for Raspberry Pi features: - Case size: 94x63.5x30mm - Does not include Raspberry Pi Code RA019 Available Price €4.50
Kit 2x Adhesive Dissipaters of Covers and Blue Aluminium For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Characteristic: 1 cover sink: - Dimensions: 13x12x5mm 1 blue aluminum sink: - Dimensions: 9x9x12mm Code RA021 Available Price €2.49
Kit 2x Blue Aluminium and Gold flat metal heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat metal sink gold color: - Dimensions: 12x12x1mm Code RA022 Available Price €1.49
Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat gold metal sink: - Dimensions: 12x12x1mm 1 green aluminum sink: - Dimensions: 19x19x8mm Code RA023 Available Price €1.99
Carcasa transparente para Raspberry Pi 2, Pi3 Model B, B+ - Caja Case Shell Box - Carcasa para Raspberry Pi 2 and Pi 3, B and B+- Color transparente- Dimensión: 89x70x25mm Code RA024 Available Price €2.35
Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ Black transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features: - Case Case Shell Box - Housing for Raspberry Pi 2 and Pi 3, B and B + - Color transparent black - Dimension: 89x70x25mm Code RA025 Available Price €2.35
Transparent green housing for Raspberry Pi 2, Pi3 Model B, B+ Transparent green housing for Raspberry Pi 2, Pi3 Model B, B+ features: - Case Case Shell Box - Housing for Raspberry Pi 2 and Pi 3, B and B + - Transparent green color - Dimension: 89x70x25mm Code RA026 Available Price €2.35
Clear blue housing for Raspberry Pi 2, Pi3 Model B, B+ Clear blue housing for Raspberry Pi 2, Pi3 Model B, B+ features: - Case Case Shell Box - Housing for Raspberry Pi 2 and Pi 3, B and B + - Transparent blue color - Dimension: 89x70x25mm Code RA027 Available Price €2.35
Ethernet Patchcord UTP 5e 1m Ethernet Patchcord UTP 5e 1m features: - For Raspberry Pi 2 and Pi 3, B and B + - HDMI V1.3b cable and full 1080P (category 2) resolution - Type A male at both ends - High quality gold shielded connectors - Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality - Refresh rates up to 120Hz - Length: 50cm - Quantity: 1 unit Code RA028 Available Price €1.69
Super SNES USB 1.5m controller SNES Controller / Joypad / USB Gamepad / Super SNES Controller Classic Super SNES USB Controller supports the operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond, Arcade, Nintendo, Raspberry pi and Model 2B pi emulator, Retro Pi OS The SNES controller works with any emulator you want to download and use. The Google SNES emulator, then the same for ROMs (for example: Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.) Super SNES USB 1.5m controller features: - USB SNES controller with standard USB 2.0 port, - Actual cable length: 1.5 meters (59 inches), - Works very well with the Raspberry emulation, - Weight: 200g. Code RA029 ✗ Out-of-Stock Price €3.99
5m UTP5 Ethernet patch cable Gray Patchcord UTP CAT5E Ethernet cable 5m length with RJ45 connectors. 5m UTP5 Ethernet patch cable features: - Connector: RJ45, - Data transmission at speeds up to 100 Mbps, - Frequencies: up to 100 MHz, - Cable length: 5m, - Cable type: UTP CAT5E 4x2x26AWG EIA / TIA 568B, - Color: gray. Carries its RoHS certificate . Code RA030 Last items in stock Price €4.85
Cable Ethernet Patchcord UTP 5e 1m The Ethernet Patchcord UTP 1m male A cable. Perfect for Raspberry Pi 2 and Pi 3, B and B+. ROHS certified Code RA031 Last items in stock Price €1.69
Raspberry Pi 3 Model A+ 512MB RAM The Raspberry Pi 3 Model A + extends the Raspberry Pi 3 range to the A + board format. - Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit 1.4 GHz SoC - 512MB LPDDR2 SDRAM - 2.4GHz and 5GHz IEEE 802.11.b / g / n / ac Wireless LAN, Bluetooth 4.2 / BLE - Extended 40-pin GPIO header - HDMI full size - Individual USB 2.0 ports - CSI camera port to connect a Raspberry Pi camera module - DSI display port to connect a Raspberry Pi Touch display - 4-pole stereo output and composite video port. - Micro SD port for charging your operating system and storing data. - 5V / 2.5A direct current input. Hardware Specifications: Code RA035 ✗ Out-of-Stock Price €32.90
300cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver 300cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features: - HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends - High quality gold shielded connectors - Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality - Refresh rates up to 120Hz - Length: 300cm - Quantity: 1 unit Code RA037 Available Regular price €4.99 -20% Price €3.99
500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver 500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features: - HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends - High quality gold shielded connectors - Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality - Refresh rates up to 120Hz - Length: 500cm - Quantity: 1 unit Code RA038 Available Regular price €6.99 -20% Price €5.59
32GB Class 10 MicroSD memory card with adapter 32GB Class 10 MicroSD memory card with adapter features: - Capacity 32GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0014 Available Price €5.99
Raspberry Pi 3 Modelo B + Kit 32GB The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @> Code RA059 ✗ Out-of-Stock Price €57.90
64GB Class 10 MicroSD memory card with adapter 64GB Class 10 MicroSD memory card with adapter features: - 64GB capacity - Class 10 - MicroSD dimensions 11mm x 15mm x 1mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0015 Available Price €9.80
Toshiba Class 10 MicroSD 16GB Memory Card with adapter Read speed: up to 100 MB / s 5 years warranty Shock resistant Waterproof Use with cameras, mobile phones Toshiba Class 10 MicroSD 16GB Memory Card with adapter features: - Capacity 16GB - Class 10 UHS-1 U1 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 Code V0016 ✗ Out-of-Stock Price €7.90
Controller Super SNES USB 1.5m Super SNES Classic Controller Super SNES USB Controller is compatible with operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond, arcade emulator, nintendo emulator, Raspberry pi and pi Model 2B, Retro Pi OS The SNES controller works with any emulator you want to download and use (Google SNES emulator, then the same for ROMs e.g. Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.). Code RA049 Available Price €3.99
Starter Kit for Raspberry Pi 3 Modelo B, B+ The Starter kit does not contain Raspberry PI. The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @> Code B0062 Backorder Regular price €23.80 -€6.87 Price €16.93
Raspberry Pi 3 Model B 1.2GHz 64-Bit Quad Core Processor LAN /BLE The Raspberry Pi 3 Model B is the third generation product in the Raspberry Pi range. The module was revolutionary for introducing the integrated WiFi and bluetooth connection which is still impressive for its quality. In addition, it introduced a processor upgrade to 1.2 GHz. Code B0063 ✗ Out-of-Stock Price €40.99