Raspberry Pi

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +. VGA camera 640x480 OV7670 B 0.3MPx 30fps Cmos features:
> - Input voltage 2.5V-3V
- Operating power 60mW / 15fps VGA YUV
- Resolution VGA 640x480 pixels (30fps)
- Maximum frame rate 30fps VGA
- Flicker 50Hz / 60Hz automatic detection
- Lens size 1/6 "
- Angle of view 25 °
- Sensitivity 1.3V / (lux- seg)
- SCCB (Serial Camera Control Bus) interface
- Output format · 8 Bits
- YUV / YCbCr 4: 2: 2
- RGB 565/555/444
- GRB 4: 2: 2
- RAW RGB data
- High sensitivity Light operation
- Automatic adjustment
- Color level saturation - Edge enhancement
- Noise level

Descripción:
El adaptador de HDMI a VGA le permite conectar un monitor, proyector o LCD analógico estándar que usa un conector o cable VGA a un cuaderno, DVD, TVbox, reproductor BIU-rog, computadora, proyector.
Característica:
- Tipo: adaptador/convertidor AV,
- Conector A: HDMI macho,
- Conector B: VGA hembra,
- Conexión Split / Duplicación: ninguna (1: 1),
- El adaptador dispone de una entrada audio Jack hembra,
- Ancho del cable del adaptador: 15cm,
- Incluye un cable audio Jack macho de ambos lados,
- Ancho del cable audio: 52cm,
- Color: blanco.

Camera module for Arduino, Raspberry Pi 2 and Pi 3, B and B +.
AL422B Video buffer consists of 3M-bits of DRAM, and it is configured as 393.216 x 8 bit FIFO (First In First Out). The interface is very easy to use because all operations are controlled by the internal DRAM memory controller. VGA Camera 640x480 FIFO AL422 Buffer OV7670 30fps features:
- Input voltage: 2.5V-3V
- Controller: AL422B FIFO buffer
- Operating power: 60mW / 15fps VGA YUV
- VGA resolution: 640x480 pixels (30fps),
- Maximum frame rate: 30fps VGA
- Flicker: 50Hz / 60Hz auto detection
- Lens size: 1/6 "
- Angle of view: 25 ° - Sensitivity: 1.3V / (lux- sec)
- SCCB (Serial Camera Control Bus) interface
- Output format: 8 Bits
- YUV />

Power Adapter 220VAC DC 5V 2.5A EU Plug USB A Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: USB A, without cable
- Indicator of operation: LED diode

The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video.

Power Adapter 220VAC DC 5V 2.5A EU Plug Micro USB Connector features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 5V
- Output current: 2.5A
- DC connector: micro USB
- Cable length 85cm

Kit 3x Aluminium Dissipative Adhesive features:
- For Raspberry Pi 2 and Pi 3, B and B +
- Heatsink includes thermal sticker
- 1x aluminum heatsink for the microprocessor
- Dimension: 14x14x5mm
- 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator
- Dimension 9x9x4mm
- Quantity: 3 units

HDMI to HDMI mini adapter features:
- Color: black - Manufacturer VCOM 

For Raspberry Pi 2 and Pi 3, B and B +.
The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm
- Quantity: 1 unit

Fan 5V 2x Cable 50x50x15mm features:
- Voltage: 5V
- Speed: 7000rpm ± 10%
- Screw diameter: 4.5mm
- Time lifespan: 50,000 hours
- Operating temperature: -10 ° C to 70 ° C
- Cable length: 28cm
- Dimensions: 50mm x 50mm x 15mm

T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features:
- Shield to connect with breadboard
- Dimension: 6 x 7.3x 1.9mm
- Flat cable female / female 40 pins
- Total length: 25cm
- Quantity:
1x shield
1x flat cable

This colourful protective case or cover is for the Raspberry Pi Zero v1.3 only. This case is not compatible with the Pi Zero W or the Pi Zero v1.2 (without camera connector) It does not include a Raspberry Pi Zero v1.3!

It has an ON / OFF switch that will cut off power when you don't need it.
USB to Micro USB On/Off Switch Arduino Charger Cable features:
- Black color
- Length: 150cm
- Maximum current 1A

Flat Cable GPIO 40 Pins M/F features:
- For Raspberry Pi 2 and Pi 3, B and B +
- Total length 20cm
- Quantity: 1 unit

It has an ON / OFF switch that will cut off the power when you don't need it and a blue LED indicator light for the power (ON switch). Characteristic: - Color: Black
- Length: 70 cm
- Current max 1A

7inch HD TFT LCD touch screen can be used as general purpose HDMI monitor. You  can connect it with a computer HDMI as the sub-display.

DS3231 Precision RTC Real Time Clock Module AVR ARM features:
- Can be used in projects of Arduino, Raspberry Pi, PIC, AVR
- Function compatible with the DS 3231
- Power supply voltage: +2.3 V to +5.5 V
- Temperature range: -40 ° C to + 85 ° C
- Low energy consumption
- Full clock calendar functions that include seconds, minutes, hours, date, month and year and valid until leap year compensation
- Two alarm calendar
- Interface: I2C

7inch HD TFT LCD screen can be used as general purpose HDMI monitor. You  can connect it with a computer HDMI as the sub-display.

Pimeroni Unicorn HAT is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. It is featured with a matrix of 64 RGB LEDs powered directly through the Pi board. The applications of the HAT spread from just a simple games in the classroom up to color indications in your robot. All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout

It has an ON / OFF switch that will cut off the power when you don't need it and a blue LED indicator light for the power (ON switch). 

Charging cables are always too short, while the distance between a power socket and electronic devices is always long? The solution to this and other problems is a 3in1 retractable cable from REMAX. This item is equipped with three most popular plugs: USB Type-C, Lightning and micro USB.

If you are into prototyping with your Raspberry (which you should be given that is what the board is for), Pimeroni Explorer HAT Pro is a great solution for you. Board is equipped with a range of inputs and outpu, which enables it to achieve range of potential applications from controlling motors, to analog sensors and 5V systems. As any Pimeroni accessory it is well compatible with all Raspberry boards and comes in with a range of Pythong libraries on github issued by Pimeroni team themselves

The perfect accessory for all devices with USB Type C, micro USB and Lightning ports. Why buy 3 different cables when you only need one.

Pimeroni Display-O-Tron is one of the most popular and at the same time easiest to use HATs in Pimoroni offering. It is featured with 16x3 character LCD supporting a complete ASCII character set. The shield is powered directly through the Pi board. The board comes with multiple capactive touch pads on top of that. All functions of the shield are accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimoroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout

Quickly charge your phone and other devices, thanks to the cable being adapted to support Quick Charge and Power Delivery.

Pimeroni Unicorn HAT HD is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. Compared to the Unicorn HAT it is equiped with twice as many LEDs in a row and a column giving a matrix of 256 LEDS! All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout

The Pimeroni Automation HAT (PIM213) is a great solution for home automation. The controller board includes relays, powered outputs and buffered inputs up to 24V as well as analog channels. Set of LEDs showing the current state of each of the channels. So if you need to get a light automation or garden sprinkling phasing set in place, this is the board just for you

Charging devices and transferring files simultaneously? No problem. All you have to do is select this cable to make it possible.

Can't stand to run out of pins in your Raspberry Pi? You have a cool new accessory but there's no way to plug it in? If you answered yes to any of the above, then this pHAT could be just for you. This piece has 6 sets of 40 GPIOS - one for your Pi and the rest (5) for your collection of HATs that you might want to plug in at the same time. Use it for a specific project or just to play with several HATs at once.  

Cable USB / micro USB con soporte de carga de hasta 3A (máx.), perfecto para renovar la energía de dispositivos móviles como smartphones y tabletas.

The 17 x 7 rectangular matrix has a total of 119 white LEDs that can be controlled individually. A dedicated extension to the Raspberry Pi Pico. The device uses the 12C bus for communication and can be safely powered via the USB port.

The 10.1-inch touchscreen with HDMI adapters will be fully compatible with Raspberry Pi mini PC, Banana pi, BeagleBone and Windows 10/8/7 PC, Mac, Microsoft, TV. 1280*800 IPS LCD capacitive touchscreen, up to 10 touch points. Tempered glass design, hardness up to 6H, scratch resistant, durable.

The Pico Explorer Base is an expansion board for the Raspberry Pi Pico, designed to teach circuit properties and allow you to perform science experiments, build small robots and inventions. The board includes functional components such as a mini prototyping board, motor drivers, ADC and GPIO cables, a speaker, a display with four usable buttons, switches and Breakout Garden rails for the expansion module.

Pimoroni Fan is the best you can do for your new Raspberry 4! It is a well known fact, Raspberries can get hot. Even though, there are plenty of solutions to that, you will find no better than this Pimoroni Fan. It is a no-solder device, hence you can put it on and off as you wish

Wireless speaker designed for everyday use at home or at work. Perfect for playing music or audio books. It was equipped with Bluetooth, FM radio, micro SD TF card reader, AUX output, USB.

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Characteristic: 1 cover sink:
- Dimensions: 13x12x5mm
1 blue aluminum sink:
- Dimensions: 9x9x12mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm 1 flat metal sink gold color:
- Dimensions: 12x12x1mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm
1 flat gold metal sink:
- Dimensions: 12x12x1mm
1 green aluminum sink:
- Dimensions: 19x19x8mm

The 28 sensor kit is a great extension kit for your micro: bit. Using Sensor shield for micro: bit you can connect all the modules included in the pack only by the connectors without the need to solder or wire any part. Now you can just concentrate on programming with your big mirco: bit.

This HAT for Raspberry has a lot of individual LED pixels to use it as a scrollable display. Control the brightness of its 119 pixels (17x7) individually by PWM and create animations or texts.

Ethernet Patchcord UTP 5e 1m features:
- For Raspberry Pi 2 and Pi 3, B and B +
- HDMI V1.3b cable and full 1080P (category 2) resolution
- Type A male at both ends
- High quality gold shielded connectors
- Manufactured with high quality copper conductors (OFC-Oxygen Free Copper- 99.99%) that guarantees the highest transmission quality
- Refresh rates up to 120Hz
- Length: 50cm
- Quantity: 1 unit

SNES Controller / Joypad / USB Gamepad / Super SNES Controller
Classic Super SNES USB Controller supports the operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond,
Arcade, Nintendo, Raspberry pi and Model 2B pi emulator, Retro Pi OS
The SNES controller works with any emulator you want to download and use.
The Google SNES emulator, then the same for ROMs (for example: Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.)
Super SNES USB 1.5m controller features:

- USB SNES controller with standard USB 2.0 port,
- Actual cable length: 1.5 meters (59 inches),
- Works very well with the Raspberry emulation,
- Weight: 200g.

Gray Patchcord UTP CAT5E Ethernet cable 5m length with RJ45 connectors.
5m UTP5 Ethernet patch cable features:

- Connector: RJ45,
- Data transmission at speeds up to 100 Mbps,
- Frequencies: up to 100 MHz,
- Cable length: 5m,
- Cable type: UTP CAT5E 4x2x26AWG EIA / TIA 568B,
- Color: gray.
Carries its RoHS certificate .

The Ethernet Patchcord UTP 1m male A cable. Perfect for Raspberry Pi 2 and Pi 3, B and B+. ROHS certified

Can't stand to run out of pins in your Raspberry Pi? You have a cool new accessory but there's no way to plug it in? If you answered yes to any of the above, then this pHAT could be just for you. This piece has 6 sets of 40 GPIOS - one for your Pi and the rest (5) for your collection of HATs that you might want to plug in at the same time. Use it for a specific project or just to play with several HATs at once.  

300cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 300cm
- Quantity: 1 unit

500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 500cm
- Quantity: 1 unit

The Pibow Coupé 4 is the ideal slim, hackable and attractive case for your Raspberry Pi 4.

The Pibow Coupé 4 is the ideal slim, hackable and attractive case for your Raspberry Pi 4.

Super SNES Classic Controller Super SNES USB Controller is compatible with operating system: Windows 98 / ME / Vista / 2000/2003 / XP / 7/7/8 / 8.1 / 10; Mac OS X and beyond, arcade emulator, nintendo emulator, Raspberry pi and pi Model 2B, Retro Pi OS The SNES controller works with any emulator you want to download and use (Google SNES emulator, then the same for ROMs e.g. Joystick Mapper / OpenEMU for Mac OS; Virtuans for Windows OS, etc.).

QWERTY mini keyboard with multimedia control keys and PC games control keys, mini touchpad for mouse control. Perfect for PC, laptop, Raspberry Pi, MacOS, Xbox 360, Xbox One, PS3, PS4, Android smartphones, TV Box, HTPC, IPTV, etc.

HDMI - Micro HDMI cable can be used to connect HDTVs to tablets, smartphones or any device equipped with a Micro HDMI socket to experience audio and video quality (up to 1080p) from home. Thanks to the built-in Ethernet network, this cable allows you to share the Internet connection between several devices without having to use a separate Ethernet cable for each of them. Check your device's user manual to make sure you have the right connectors. This cable, made of good materials for HDMI, guarantees clean transmission between HDMI devices. No interference or data loss in digital transmission. Compatible with all HD formats available on the market and suitable for 480p/480i/720p/1080i and 1080p resolutions. Also compatible with HDMI 1.3b.

USB to USB type C cable, this model of data cable is also very suitable for exchanging documents, photos and music with your smartphone or computer. It can be used for tablets, smartphones or any device that has a USB-C socket.

Universal microSD memory card reader with USB 3.0 interface. Allows you to transfer data from the card to your desktop and laptop. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive

Ethernet Patchcord UTP 5e 1.5m

Ethernet Patchcord UTP 5e 2m features:

Ethernet Patchcord UTP 5e 1.5m

Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and notebook computer. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive.

Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and notebook computer. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a Pen Drive.

Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and laptop. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a pen drive.