HDMI to HDMI mini adapter

5x Pushbutton B3F Green Key Omron Electronica Arduino Prototype Switch 12 features:
- 5x Pushbuttons B3F Omron
- 5x Keys
- Maximum current: 50mA
- Tension DC: 24V
- Operating force: 1.27N
- Switch terminals - Weldable
- Contact: SPST-NO
- Contact resistance: 100M Ohm
- Type of action: Superficial
- Measures: 12x12x7.3mm

DC Step Down Converter 3.3V 2A 3.4-6V features:
- Voltage drop module
- Input voltage: 3.4-6V
- Output voltage: 3.3V
- Current output: adjustable, max 2A
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 1.5MHz
- Efficiency conversion: up to 95%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 12 x 15 mm
- Full charge output ripple: Vpp <50 mV
- Output accuracy: ± 0.1V
- Current IQ without load: 0.2mA
- Stop current (EN) <10uA

32GB Class 10 MicroSD memory card with adapter features:
- Capacity 32GB
- Class 10
- Dimensions of the microSD 11 mm x 15 mm x 1 mm
- FAT32 format
- Operating temperature -25 ° C to 85 ° C
- Storage temperature -40 ° C to 85 ° C
- Voltage 3.3 - Includes adapter

RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features:
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable.
- They are based on the 5050 LEDs
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors per LED
- Communication One-wire
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Waterproof
- With 3M adhesive

10x Electrolytic Capacitor 100 uF 25V 105ºC Arduino features:
-Type: Electrolytic Capacitor
-Assembly: intern
-Value: 100uF
-Maximum tension: 25V
-Maximum temperature: 105º C
-Dimensions: 6x11mm
-Quantity: 10 units

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 2P2T 50V 0.5A features:
- Type: 2P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"

Resistors 2K Ohm 5% 0,25W 1/4W features:
-2 Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

Load Cell 1 kg Scale Sensor Weight Arduino 
Load cell to measure weight up to 1kg
The transducer measures the deformation of the metal structure and converts it into a few mV. Load cell Load Cell Weight Sensor 1kg features:
- Load range: 1kg
- Operating voltage: 3VDC ~ 14 VDC.
- Nominal output: 1.0 ± 0.15mV / V
- Repeatability: 0.03% FS
- Effect of the temperature at the outlet: 0.01% F.S / ° C