Creality's Halot-Mage resin 3D printer has a 10.3-inch LCD screen, giving it an extremely large working area of 228 x 128 x 230 mm. The Halot-Mage has a high resolution of 8K, resulting in prints of the highest precision.

The practical cable stripper from the Rebel Tools range is ideal for stripping the insulation from single or multi-conductor cables. The hardened jaws and blades allow for greater cutting precision and the serrated tip makes it easier to remove the insulation and minimises the risk of damaging the cable.

Nicla Sense ME is the smallest Arduino-developed board equipped with a range of the latest Bosch environmental and motion sensors. The module is based on the nRF52832 ARM Cortex M4 chip clocked at 64 MHz with 512 kB of Flash, 64 kB of RAM and 2 MB of SPI Flash and 2 MB of QSPI embedded memory. The Nicla Sense ME features the Bosch BHI260AP, BMP390, BMM150 and BME688 embedded sensors. 

Nicla Voice combines a powerful Syntiant® NDP120 Neural Decision Processor™ (NDP), a high-performance IM69D130 microphone, a BMI270 6-axis intelligent motion sensor, a BMM150 3-axis magnetometer and Bluetooth® Low Energy connectivity.

Nicla Vision combines a powerful STM32H747AII6 Dual ARM® Cortex® M7/M4 IC processor with a TinyML-enabled 2 MP colour camera, as well as a smart 6-axis motion sensor, integrated microphone and distance sensor. Supports MicroPython, and offers WiFi and Bluetooth® Low Energy connectivity.

Arduino Uno R4 WiFi is the original Arduino Uno module with the powerful 32-bit Renesas RA4M1 ARM Cortex M4 ARM Cortex M4 microcontroller. The board is equipped with 256 kB of Flash memory and 32 kB of SRAM, 14 digital I/O, including 6 PWM, 6 ADC and 1 DAC. Popular communication interfaces such as SPI, I2C, UART and CAN are available. It operates with a voltage of 5 V. The ESP32-S3-Mini chip handles WiFi and Bluetooth communication. The Uno R4 WiFi features a 12x8 matrix of addressable red LEDs as well as a Qwiic connector.

It is an 8-megapixel camera with a 160-degree field of view, equipped with a chip Sony IMX219.  The camera is designed for NVIDIA Jetson Nano and NVIDIA Jetson Xavier NX development kits.

Converter RS232/485/422 to Ethernet RJ45 has been designed for the industrial environment. It combines multiple functions including serial server, Modbus gateway, MQTT gateway, RS485 to JSON, etc. The module has an RS232/485/422 and Ethernet port (PoE function).Suitable for applications such as data acquisition, IoT gateway, IoT security. and smart device monitoring.

M12 Long Focal Length Lens, 5MP, Long Focal Length 25mm, F1.7 Large Aperture, Compatible with Raspberry Pi High Quality Camera M12

 M12 High Resolution Lens, 12MP, 69.5° FOV, 8mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. Long Focal Length.

M12 M12 High Resolution Lens, 12MP, 113° FOV, 2.7mm Focal length, Compatible with Raspberry Pi High Quality Camera M12. No distortion.

M12 High Resolution Lens, 12MP, 160° FOV, 3.2mm Focal length, Compatible with Raspberry Pi High Quality Camera M12

The LM570R-I laser spirit level is a handy tool used in the construction industry for horizontal and vertical levelling. The 10mW red laser is ideal for projects requiring accurate levelling in a two-dimensional area.

M12 High Resolution Lens, 14MP, 184.6° Ultra wide angle, 2.72mm Focal length, Compatible with Raspberry Pi High Quality Camera M12.

The assembled Original Prusa i3 MK3S+ is the latest version of the MK3 3D printer line. It has a new SuperPINDA probe for improved first layer calibration, high quality bearings have been added and a number of useful design tweaks have been made. Gratis - 1kg Prusa Orange PETG Filament and Textured Sheet with Double Sided PEI Powder Coating

Solar Power Manager (C), Supports 3x 18650 Batteries, Multi Protection Circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output.    

Solar power manager (B), Built-in 10000mAh rechargeable Li-Po battery, Multiple protection circuits. Compatible with 6V~24V solar panels, Rechargeable from solar panel or C-type power adapter. 5V/3A regulated output.

The micro:bit servo driver module, 16 channel, 12 bit, I2C interface. Have you ever had the problem of not having enough micro:bit PWM outputs when trying to create a robotic arm or other robot that requires multiple servos? At times like this a great solution comes to your aid. This servo controller will be the perfect choice.

This converter has internal DC/DC power supply and full isolation between USB and RS485 output and enables to establish reliable and secure communication. It adopts the original FT232RNL and SP485EEN chip solution, provides stable communication with built-in galvanic isolation, lightning protection and anti-electrostatic protection, etc., it is an ideal choice for industrial control equipment and/or applications with high communication requirements.

M12 high resolution lens, 16MP, 105° FOV, 3.56mm focal length, Raspberry Pi HQ camera M12 compatible.

RGB full-color LED matrix panel, 2.5mm Pitch, 64x32 pixels, adjustable brightness. At dusk, the dazzling neon lights of the streets and alleys illuminate the entire city, making it more dynamic. It's clear that the colour LED matrix panel plays an important role. Whether outside shops, on the bus or in a taxi, you can always see animations or advertising videos. Sounds great, why not give it a try? Provides open source development resources for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino.

The Portenta Breakout module extends the capabilities of the Arduino Portenta module with additional connectors and cables. The module includes a power switch, a DIP switch for selecting the start mode of the Arduino Portenta, as well as a series of connectors: USB A, RJ5, microSD, OpenMW, MIPI 20T JTAG. The board also includes the RTC chip, as well as a slot for the CR2032 battery, a screw connector for the power supply and all the cables for the Arduino Portenta module.

This SparkFun CO2, humidity and temperature sensor incorporates Sensirion's new generation of SCD40 photoacoustic CO2 sensors for highly accurate environmental readings. The sensor is capable of detecting concentrations from 0 to 40000 ppm with high precision above 400-2000 ppm ±(50 ppm+5%). The SCD40 has an integrated CMos® temperature and humidity sensor for greater precision.

The precision pocket screwdriver is a useful accessory not only for DIY enthusiasts. It will give good results, for example, for changing batteries in electronic toys and other repairs. Its small size makes it easy to store in your handbag, and its pen shape with an additional clip allows you to attach the product to your shirt or trouser pocket to have it at hand in any situation.

Do you want to have the right amount of essential tools for easy assembly and repair? Always be prepared for the job in hand. The 38-piece bit set from Rebel Tools is something every DIY enthusiast should have in their workshop. Each of the included accessories, i.e. the ratchet spanner, the magnetic adapter, the extension handle, the 9 socket spanners and the different types of bits will make your DIY work easier.

The SparkFun Qwiic Cable Kit includes 10 cables of different lengths and styles that will connect your Qwiic boards to each other, to a development platform or to a breadboard. Each Qwiic cable is colour coded red, black, blue and yellow with 1mm JST termination.

Do you want to have the right amount of essential tools to make assembly and repair easier? Always be prepared for the job in hand. This set of 100 Rebel Tools bits is something every DIY enthusiast should have in their workshop. Each of the accessories included, i.e. the magnetic holder, the 25 mm adapter and the different types of drill bits, will certainly make your DIY work easier.

Set of 18 screwdrivers made of chrome vanadium steel, with ergonomic handle. The set consists of 8 SL/PH screwdrivers and 10 SL/PH/Torx precision screwdrivers.

The Rebel tape measure is a must-have measuring instrument in every DIY enthusiast's toolbox. It is indispensable for measuring all kinds of materials and surfaces during major renovations, as well as for small repairs and home improvements.

Soldering Iron Holder comes supplied with a special replaceable sponge, for use in cleaning the tip.

Set of 6 screwdrivers made of chrome vanadium steel, with ergonomic handle and magnetic tip. The set consists of straight and cross head screwdrivers.

A set of magnetic extension drills from the Rebel Tools range will come in very handy in any DIY workshop. The 60 mm long handle makes it easy to attach to any screwdriver. The set also includes 14 chrome vanadium steel tips, colour-coded for easy identification. The strong magnetic holder makes it easy to mount the bits for stable, comfortable work.

The pliers enable precise cutting and stripping of single and multi-core cables with diameters between 0.8 and 2.6 mm / 110-20 AWG.

SparkFun DataLogger IoT - 9DoF is a pre-programmed data logger to automatically log IMU, GPS and various pressure, humidity and distance sensors - all without having to write a single line of code! DataLogger automatically detects, configures and logs Qwiic sensors. It is specifically designed for users who only need to capture a large amount of data in a CSV or JSON file and return it to their larger project.

High quality and very flexible heat shrink tubing. Available in different sizes (1.6mm, 2.4mm, 3.2mm, 4.8mm, 6.4mm, 9.5mm) in 5 colours each 10 cm long.

High quality and very flexible heat shrink tubing. Available in different sizes (1.5mm, 2.5mm, 4mm, 6mm, 10mm and 13mm) in black colour each 10 cm long.

High quality and very flexible heat shrink tubing. Available in different sizes (1.5mm, 2.5mm, 4mm, 6mm, 10mm and 13mm) in six colours (black, white, red, yellow, yellow, green, blue), each 10 cm long.

Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia.

Official Raspberry Pi Mouse USB with wheel. Compatible with all Raspberry Pi products.

High quality and very flexible heat shrink tubing. Available in different sizes (2mm - 7mm) in five colours (black, red, yellow, yellow, green, blue), each 3.5 cm long.

LITHIUM POLYMER BATTERY Battery LIPO 3400mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 3900mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2600mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2750mAh 3.7V

 Master Slave Bluetooth Modul for Arduino iOS Android. The HM10 supports Bluetooth 4.0 (low energy) and therefore has a relatively low power consumption.

Official Raspberry Pi keyboard suitable for all Raspberry Pi products. Comfortable ergonomic design.

LITHIUM POLYMER BATTERY Battery LIPO 2450mAh 3.7V

It is one of the most popular stepper motors with 200 steps per revolution and a maximum load of 2.6 kg/cm (0.25 Nm). It is supplied with a voltage of 12.0 V, consumes a current of 400 mA per coil. Dimensions: 42 x 42 x 34 mm (NEMA 17).  Comes with a 30 cm cable. We have the best stepper motors at the best prices!

Are you looking for a reliable USB to USB C cable that provides fast charging without getting hot? Choose the featured Surpass Series USB-C cable.

This cable will instantly charge the battery of your smartphone or tablet: it is compatible with devices equipped with a USB Type-C port. When connected to a computer, the cable works in two ways: it transmits data and also charges batteries.