Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Last items in stock Price €2.95
3x Heat Sink Aluminium Adhesive A4988 DRV8825 3x Heat Sink Aluminium Adhesive A4988 DRV8825 features: - Package includes: 3x Heatsink with adhesive - Ideal for DRV8825, A4988 etc - Dimensions: 9 x 9 x 5mm Code I0046 Available Price €0.35
Thermally Conductive Silicone Paste H 100g Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors. Code Q0038 Last items in stock Price €5.49
5x Power LED Aluminum Heat Sink 1W 3W 5x Power LED Aluminum Heat Sink 1W 3W features: - Outside diameter: 36mm- Height: 15mm- Quantity: 5 units Code P0037 Available Price €1.48
Thermally Conductive Silicone Paste H 7g Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K Code Q0051 Available Price €1.45
3x Power LED Aluminum Heat Sink 3W 5W 3x Power LED Aluminum Heat Sink 3W 5W features: - Outside diameter: 36mm- Height: 30mm- Quantity: 3 units Code P0038 Available Price €1.95
3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.59
Thermal Paste Syringe 3.1W / mK - AG Copper Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.95
Aluminium Adhesive Heatsink pack 3pcs Kit 3x Aluminium Dissipative Adhesive features: - For Raspberry Pi 2 and Pi 3, B and B + - Heatsink includes thermal sticker - 1x aluminum heatsink for the microprocessor - Dimension: 14x14x5mm - 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator - Dimension 9x9x4mm - Quantity: 3 units Code RA005 Available Price €1.29
Copper Adhesive Dissipator For Raspberry Pi 2 and Pi 3, B and B +. The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm - Quantity: 1 unit Code RA006 Available Price €1.49
Thermal Pad - 1,5 W/mK - AG Thermopad Thermal Pad Silicone Heat Pad CPU GPU features: - The transfer of heat between the electronic components and the radiator is facilitated.- Thermal conductivity 1,5W / mK- Thickness 1mm quantity: 1 unit- High quality - manufactured in EU- Thermopad 100x20x1mm- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling Code Q0039 Available Price €1.29
Thermal Pad 6W/mK - AG Thermopad Thermal Pad Silicone Heat GPU CPU 130x20x1mm. The tapes are thermally used as an application of a thermal paste. Code Q0044 Available Price €4.39
Silicone Insulating Paste N 3.5g The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features: - The breaking voltage is ~ 30kV / mm.- Preserves rubber, plastic- A wide range of operating temperatures: -50 ° C to 200 ° C- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0049 Available Regular price €1.79 -€0.30 Price €1.49
Aluminum Heatsink with Adhesive LM2596 XL4015 Aluminum Heatsink with Adhesive LM2596 XL4015 features: - Ideal for LM2596, XL4015, etc...- Dimensions: 11x11x5.5mm Code A0025 Available Price €0.59
Silicone Insulating Paste N 60g The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. The breaking voltage is ~ 30kV / mm.Preserves rubber, plastic. A wide range of operating temperatures: -50 ° C to 200 ° C. Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU Code Q0048 Available Price €2.44
Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95
Aluminum Heat Sink 10x2.5cm Power LED 3W 5W The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high. Code P0049 Available Price €3.49
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Available Price €4.79
Aluminum Heat Sink 15x2cm LED 1W-3W Aluminum Heat Sink 15cm 2cm LED 1W 3W features:Aluminum heatsink for LED 1W-3W, Length: 15cm, Width: 2.0cm, Height: 0.6cm. Code P0051 Available Price €2.79
Heat Sink for NanoPi NEO Plus2 Includes Screws The perfect heatsink with aluminium adhesive for NanoPi Neo Plus module with screws Code B0050 Available Price €5.00
Thermal conductive paste HP 340°C 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Available Price €10.99
Insulation pad + Peltier cell thermal paste kit The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams. Code M0058 Available Regular price €7.35 -€2.45 Price €4.90
Kit 2x Adhesive Dissipaters of Covers and Blue Aluminium For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Characteristic: 1 cover sink: - Dimensions: 13x12x5mm 1 blue aluminum sink: - Dimensions: 9x9x12mm Code RA021 Available Price €2.49
Insulation pad Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. Code K0254 Available Price €0.59
Kit 2x Blue Aluminium and Gold flat metal heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat metal sink gold color: - Dimensions: 12x12x1mm Code RA022 Available Price €1.49
Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat gold metal sink: - Dimensions: 12x12x1mm 1 green aluminum sink: - Dimensions: 19x19x8mm Code RA023 Available Price €1.99
Transistor heat sink with TO-220/TIP120 box Heat sink for transistors with TO-220 / TIP120 box Transistor heat sink with TO-220/TIP120 box features: Aluminum heatsink: - Dimensions: 25x15x10mm Code T0069 Available Price €0.45
Thermally Conductive Silicone Paste HP 7g Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Code Q0146 Available Price €2.49
DC 12V CPU heatsink for high power 50W LED diodes High power 50W LED suitable for KTV light, projection lamps.Ideal for DIY projects. DC 12V CPU heatsink for high power 50W LED diodes features: - 35mm thick heat sink,- DC 12V Ø95 x 25mm fan,- 4 screws to fix the base carrying the LED diodes,- Step between screws: 71.5mm,- Includes thermal grease. Code P0138 Available Price €17.99
Heat Sink Aluminium Nema 17 Heat Sink Aluminium Nema 17 features: - MK8 Extruder Radiator Heatsink Printer - Ideal for NEMA17 motors and MK7 and MK8 extruders - Dimensions 40 x 40x 11mm Code I0038 Available Price €1.79
Heat Sink Aluminium Adhesive Radiator 25x25 Heatsink aluminium adhesive radiator for electronics components. Especially recomanded for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc. Good thermal conductivity, reduce the risk of hardware failure due to overheating, made of high quality Aluminum. Code A0117 Available Price €0.85
Heat Sink Aluminium Adhesive Radiator 25x25 Heatsink aluminium adhesive radiator for electronics components. Especially recomanded for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc. Good thermal conductivity, reduce the risk of hardware failure due to overheating, made of high quality Aluminum. Code A0118 Available Price €1.19