2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

HAT kit with 2 DOF turn & tilt stand designed for Raspberry Pi. Includes the integrated PWM chip PCA9685 that allows RPi to control camera movement, and the TSL25911FN ambient light sensor that detects light intensity through the I2C interface.

LCD TFT Display Module 240x320 2.4 SPI features:
- LCD screen TFT 240x320 pixels
- 262,000 possible colors (18 bit)
- Pixel: RGB vertical band
- Driver ILI9341
- SPI interface
- 8-bit digital interface, 4-bit control lines
- Resistive touch screen 4 - cables
- Ideal for projects with ARDUINO, Uno R3, MEGA2560
Helpful Links:
Wiring of the TFT LCD screen 2.4 SPI
- Connect the TFT 2.4 SPI LCD screen with the UNO module
Display graphics and texts on the LCD TFT screen 2.4 SPI
Program a touch calculator on the LCD screen TFT 2.4 SPI

10mm copper tape - Conductor features:
- Material: copper foil - Size: 20 mm — 30 m - Copper foil thickness: 0.05 mm - Conductive - Adhesive - Approx Length: 30m Applications:
- EMI and RF shielding, - paper circuits, soldering, - electrical repairs, - slug repellent.

- It consists of a 20-character, 4-row display
- The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem
- Only two pins are needed for communication, SDA and SCL
- Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32
PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F
- It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2
20x4 2004 LCD display PCF8574T I2C Backlit Blue features:

- LCD screen, 20 characters and 4 lines
- 5V power supply
- HD44780 compatible controller

Contents: - 2x Round transparent chassis plate diameter of 14cm
- 2x DC 5V gear motor
- 2x 6.5cm wheels (Dia .) x 2.6cm (H)
- 2x Encoder discs
- 2x Idlers
- 2x HC-SR04 ultrasonic sensor, distance meter
- 2x Holder for HC-SR04
- 1x Battery holder 2xAA (batteries not included)
- Screws for assembly Motor characteristic: - Voltage: 3 at 6Vdc
- Reducer: 1:48
- No load speed: 100 RPM at 6Vdc
- No load current: 90mA at 3Vdc - 180mA at 6Vdc

  - The ideal kit to build a robot car
- Includes battery compartment for 6 AA batteries and ignition switch. (batteries not included)   2WD Smart Robot Car Distance UNO Kit DIY features:
  - Robot platform with 2 wheels and idler
- UNO CH340 board compatible with Arduino
- Prototype plate 170 points
- Micro servo 9g
- Platform for servo
- Distance sensor HC-SR04
- Sensor shield for sensors
- L298N motor controller   Motor 2WD Smart Robot Car Distance UNO Kit DIY features:
  - Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc

- The ideal kit to build a robot car
- Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included)
2WD Smart Robot Car Kit DIY features:
- Robot platform with 2 wheels and idler
- UNO CH340 board compatible with Arduino
- Prototype plate 170 points
- Micro servo 9g
- Platform for servo
- Distance sensor HC-SR04
- Sensor shield for sensors
- L298N motor controller
Motor 2WD Smart Robot Car Kit DIY features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Dimensions of the wheel: diameter 65mm - width 26 mm
Helpful Links:
Realization of a robot manageable by Infrared

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case 

Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white.