USB Cable for Arduino Type A-B USB Cable for Arduino Type A-B features: - Length: 50cm- Color: Blue Code K0158 Available Price €1.49
Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development Mini ESP8266 ESP12E CH340 WiFi Development NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu it is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC It works as a standard WiFi 802.11 b / g / n 2.4 GHz Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development features: - Compatible with Arduino, programming with the Arduino IDE - Power supply voltage: 5V - LOGICAL LEVELS: 3.3V - 11 input / output pins - 1 ADC (input: 0-3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and power management units Integrated Code W0061 Available Price €3.49
HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.79
Arduino compatible UNO R3 board - It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features: - Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal - Microprocessor: ATmega328 - Operating voltage: 5V - Input voltage (recommended): 7-12V - Input voltage (limits): 6-20V - Clock speed: 16 MHz - Digital I / O Pins: 14 - Analog input pins: 6 - DC current per I / O Pin: 40 mA - DC Current per Pin 3.3V: 50 mA - Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328 - SRAM 2 KB - Atmega328 Code B0009 Available Price €9.95
Photoresistor GL5516 LDR 10x Photoresistor 5mm GL5516 LDR 5-10k for Arduino.Photoresistor is a resistor whose resistance decreases when increasing the intensity of the light that falls on it. 10x Photoresistor GL5516 LDR features: - Model: GL5516- Spectral peak: 540nm- Maximum DC voltage: 150V- Maximum power: 90mW.- Resistance with light (10lux): 5-10KΩ- Resistance with darkness (0lux): 0.5MΩ- Response time: 20ms- Operating temperature: -30ºC - 70ºC Code S0012 Available Price €0.15
Resistor 200R Ohm 5% 0,25W 1/4W Resistor 200R Ohm 5% 0,25W 1/4W features:-200R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0007 Available Price €0.08
Resistor 1K Ohm 5% 0,25W 1/4W Resistor 1K Ohm 5% 0,25W 1/4W features:-1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0013 Available Price €0.08
Acrylic platform for Arduino UNO Acrylic panel for Arduino Uno with a very simple structure with rubber feet. After assembly with the 400 points breadboard, the assembly looks professional and elegant. Code PB030 Available Regular price €2.49 -€0.60 Price €1.89
Soldering Iron Tip Cleaner Ball Soldering tip cleaner allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip. Code H0198 ✗ Out-of-Stock Price €2.99
Third hand support for cable soldering Third hand stand for easy soldering of wires with a diameter from 1 to 5mm. Number of holes 5. Code MX0001 ✗ Out-of-Stock Regular price €3.79 -€0.90 Price €2.89
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €6.75
Soldering PCB Holder 200x140mm Adjustable 360 Degrees Soldering PCB Holder 200x140mm Adjustable 360 Degrees features: - Support for welding, repair- Adjustable support 360 degrees- Tool for mobile repair- Circuit Board Repair Moviles- High quality- Weight: 0.7kg- Dimensions: Approx. 300x165x125mm Code H0050 Last items in stock Price €12.95
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.49
Helping Hand Magnifier LED Light with Soldering Stand - ZD-126-3 Third hand stand with LED lamp and crocodile clips. It has a backlight with 5 bright LEDs and two additional mini-lights. Code H0571 Available Price €18.95
Soldering Iron Holder Soldering Iron Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Dimensions of base: 84 x 130 mm- Weight: 0.2kg Code H0095 Available Price €3.99
Vacuum Pump Components SMD Suction Cup Suction Vacuum Pump Components SMD Suction Cup Suction features: - An economical option for suction for handling SMD components- Includes 3 suckers of different sizes Code H0118 Available Price €2.73
Soldering Iron Tip Cleaner Ball Soldering tip cleaner allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip. Code H0198 ✗ Out-of-Stock Price €2.99
Third hand support for cable soldering Third hand stand for easy soldering of wires with a diameter from 1 to 5mm. Number of holes 5. Code MX0001 ✗ Out-of-Stock Regular price €3.79 -€0.90 Price €2.89
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €6.75
Soldering PCB Holder 200x140mm Adjustable 360 Degrees Soldering PCB Holder 200x140mm Adjustable 360 Degrees features: - Support for welding, repair- Adjustable support 360 degrees- Tool for mobile repair- Circuit Board Repair Moviles- High quality- Weight: 0.7kg- Dimensions: Approx. 300x165x125mm Code H0050 Last items in stock Price €12.95
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €3.49
Helping Hand Magnifier LED Light with Soldering Stand - ZD-126-3 Third hand stand with LED lamp and crocodile clips. It has a backlight with 5 bright LEDs and two additional mini-lights. Code H0571 Available Price €18.95
Soldering Iron Holder Soldering Iron Holder features: - Comes supplied with a special replaceable sponge, for use in cleaning the tip- Suitable for use with most welders- Dimensions of base: 84 x 130 mm- Weight: 0.2kg Code H0095 Available Price €3.99
Vacuum Pump Components SMD Suction Cup Suction Vacuum Pump Components SMD Suction Cup Suction features: - An economical option for suction for handling SMD components- Includes 3 suckers of different sizes Code H0118 Available Price €2.73