Water-Based Cleaner PCB 1L
  • Water-Based Cleaner PCB 1L
  • Water-Based Cleaner PCB 1L

Water-Based Cleaner PCB 1L

Q0031

Aqueous PCB cleaner
Water-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.
It causes the saponification of the rosin and the dissolution of the flow residues.
Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.
Does not attack metal and aluminum surfaces.
Water-Based Cleaner PCB features:
- Type of chemical preparation: aqueous stripper of PCB printed plates
- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components
- Form: Liquid
- Capacity: 1l

Termopasty
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Water-Based Cleaner PCB description


Aqueous PCB cleaner
Water-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.
It causes the saponification of the rosin and the dissolution of the flow residues.
Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.
Does not attack metal and aluminum surfaces.

Water-Based Cleaner PCB features:


- Type of chemical preparation: aqueous stripper of PCB printed plates
- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components
- Form: Liquid
- Capacity: 1l

Customers who bought this product also bought

LED Display 1-Digit 7-Segment Red Common Anode

This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.
It works with very low current consumption.
The segments of this screen are connected with a common anode point.
LED Display 1-Digit 7-Segment Red Common Anode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Digit numbers: 1
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C

P0117

Price €0.70

Female Strip 40 Short Pins

Female Strip 40 Short Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 1 unit of strips of 40 female pins each

K0139

Price €0.57

DHT11 Module Temperature and Humidity Sensor

The DHT11 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement.
Characteristic:
- Operating voltage: 3 to 5 VDC - Humidity measurement range: 20-95% ± 5% accuracy
- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy
- Maximum sampling rate: 2 seconds - Working current 2.5mA
- 1-wire interface
- Dimensions: 32 x14 mm
- Quantity: 1 unit with 3x female / female cables

S0001

Price €2.47

Arduino compatible Nano V3.0 CH340 board

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0006

Price €7.40

Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml

A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - manufactured in EU

Q0028

Price €5.78

Heat Shrinkable Tube 5 Colors 3 Meters Package

Heat Shrinkable Tube 5 Colors 3 Meters Package features:
- Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas.
- These heat shrink tubes are very flexible and of high quality. Made in EU
- Different sizes of 20 cm each are delivered:
* 1,6mm: black, brown, red, yellow, orange
* 2,4mm: black, brown , red, yellow, blue
* 3,2mm: black, brown, red, yellow, blue
- Quantity: 15 units
- Material: polyolefin
- Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter)
- Minimum shrinkage temperature: 115 ° C maximum 200 ° C

K0047

Price €1.61

Related articles on blog

No related article on blog

€4.88

4,88 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €4.88

Order until 4pm we will send today
30 days return