List of products by supplier abc-rc.pl

4-Port USB 3.0 Multipport HUB Ladder features:
- High speed multiplier strip

Suitable for a small solar power system, etc.
6V 2W Solar Panel Do-it-yourself Mobile Photovoltaic Charger Cell features:

- Working voltage: 6V
- Output power: 2W
- Product size: 136x 110x 3 mm
Applications:
- Charge cell phones
- Home lighting
- DIY solar powered toys

Cable chain 15x20 1m for CNC 3D printer features:
- Suitable for movements where cable displacement or twisting is needed, where cable protection is needed - Easy for installation And maintenance; Low noise, high speed wear resistant movement - The cable structure has been widely used in CNC machine tools, electronic equipment, fire fighting machinery and equipment, stone machinery, machinery glass, doors and windows of machines, injection molding machines, robots, overweight transport equipment, automated warehouses. - Internal widths 15x20mm
- External measurement 20x28mm
- Material: reinforced series polyamide
- Length: 1m
- Quantity: 1 unit

Converter DC USB Step Down 7V-24V to 5V 3A features:
- Voltage reduction module with USB connector
- DIY mobile power supply, to achieve the 5v output to charge the phone, mp3, mp4, psp, etc. can not charge for the ipad
- The USB output converter module has short circuit protection 5A current automatic protection
- Based on the monolithic MP2307 controller
- Rectification: not synchronous
- Input voltage: DC 7v to 24v
- Output voltage: DC 5v
- Output current: 3A (Little time 4A)
- Output connection: USB Type A female connector
- Input connection: Terminal with screws
- Efficiency of transformation: 96%
- Switching frequency: 340KHz
- Output ripple: 30mV (max.)
- Load regulation: ± 0.5%

Cutting Pliers 130mm features:
- This model is not isolated, please use it without current
- Use to cut soft materials, electronic components, cables, plastic card
- Can also be used for welding work

It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations.
Characteristic:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 45 V
- Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32
- Factory soldered temples
- 4-layer PCB, 2 oz. Copper for improved heat dissipation
- Short-circuit and overtemperature protection - Use potentiometer to adjust the current
- Measurements: 20x16x12 mm

Characteristic: - Voltage: 12V
- Consumption: 120mA
- Speed: 4800rpm -5600rpm
- Noise level: 25dB ± 10%
- Screw diameter: 4.5mm
- Life time: 40000 hours
- Operating temperature: -10 ° C to 65 ° C
- Length Cable: 28cm
- Dimensions: 40mm x 40mm x 20mm
- For cooling MK8 hotels

Fan 12V 2x 3D Printer Cables features:
- Voltage: 12V
- Consumption: 65mA
- Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10%
- Screw diameter: 4.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 11cm
- Dimensions: 40mm x 40mm x 10mm

Flexible Coupler 5mm/6.35mm Z-Axis 3D CNC Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 6.35 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 6.35mm - Quantity 2units

High quality flexible aluminum coupler, so you can join Nema 17, 6.35mm stepper motors to an 8mm threaded rod. They incorporate 4 captive screws so you can perfectly fix the couplings to the rod. Flexible Coupler 6.35mm/8mm shaft features:
- Material: Aluminum alloy
- Coupler height ( L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6.35mm / 8mm - Quantity 2 units

High quality flexible aluminum coupler, so you can join Nema 17, 6mm stepper motors to a 10mm threaded rod. They incorporate 4 screws studs so you can perfectly fix the couplings to the rod. Flexible Coupler 6mm/10mm shaft features:
- Material: Aluminum alloy
- Coupler height (L ): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 10mm - Quantity 2units

Flexible Coupler 6mm/8mm CNC 3D Printer Shaft features:
- Flexible coupling in high quality aluminum with which you can join Nema 17, 6mm stepper motors to an 8 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 6mm / 8mm

High quality flexible aluminum coupler, so you can join Nema 17, 8mm stepper motors to a 10mm threaded rod. They incorporate 4 screws captive so you can perfectly fix the couplings to the rod. Flexible Coupler 8mm/10mm shaft features:
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- External diameter: 19mm
- Shaft diameter: 8mm / 10mm - Quantity 2units

High quality aluminum flexible coupler, so you can join Nema 17, 8mm stepper motors to an 8mm threaded rod. They incorporate 4 screws studs so you can perfectly fix the couplings to the rod. Flexible Coupler 8mm/8mm shaft features:
- Material: Aluminum alloy
- Coupler height (L ): 25 mm
- Outside diameter: 19mm
- Shaft diameter: 8mm / 8mm - Quantity - 2units

The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want.

HDMI to FULL HD video and audio output converter with selectable 1080P or 720P switch Includes USB power cable.

10mm Bore Pillow Block Mounted Bearing is often suited to support rotating shaft applications.

Linear Bearing LM10UU 10mm Ball Bearing for 3D Printer RepRap Prusa features:

- Measurements:
* Internal diameter 10mm
* External diameter 19mm

* Length 29mm
- Enclosure material: chrome-plated anti-corrosion steel
- Internal support material: technical plastic

Mechanical End of Career CNC Ramps1.4 3D Printer features:
- Mechanical limit switch, Endstop
- 100% brand new and high quality
- 1A 125V AC switch - Cable length: 70cm
- PCB dimensions: 40mm x 15mm

Mini Fan 12V 2x 3D Printer Cables features:
- Voltage: 12V
- Consumption: 80mA
- Speed: 2600rpm +/- 10%
- Temperature operating: -10 ° C to 65 ° C
- Cable length: 12cm
- Dimensions: 25mmx 25mm x 10mm

One of the most popular stepper motors with 200 steps per revolution and a maximum load of 5 kg/cm. It comes with a 30 cm cable. We have the best stepper motors at the best prices!

Optical Limit Switch for 3D CNC Printer RepRap Prusa Ramps 1.4 features:
- 100% brand new and high quality
- Optical detector: TCST2103
- Length cable: 50cm
- Size: 32mm x 10mm

Supply voltage: 110 / 230V AC. Output voltage: 12V DC. Output amperage: 20A. Power at 12V: 240W

Power Supply DC 5V 6A 30W features:
- Supply voltage: 110 / 230V AC
- Output voltage: 5V DC - Output amperage: 6A
- Power at 5V: 30W
- Dimensions: 110mm x 78mm x 36mm

Pulley GT2 20 Teeth 6mm Aluminium Pulley 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 18mm
- Inner hole: 5mm
- Use with strap: 6mm and 6.35mm
- Ideal to fix on the axis of the motors of your 3D printer

Pulley GT2 20 Teeth 8mm Bore Aluminum 3D Printer Reprap features:
- Number of teeth: 20
- Pitch: 2mm
- Material: Aluminum alloy
- Outside diameter: 16mm
- Inner hole: 8mm
- Use with strap: 6mm and 6.35mm
- Toothed width 7mm
- Quantity: 1 unit
- Ideal for fixing on the axis of the motors of your 3D printer

SCS16UU is aluminum block shell. LM16UU linear bearing built-in.

It's a slide block for 16mm smooth rods.

SCS8UU is aluminum block shell. LM8UU linear bearing built-in.

It's a slide block for 8mm smooth rods

Shaft Coupling Motor Connector 5mm 5mm CNC features:
- Fixed coupler in high quality aluminum
- They incorporate 4 captive screws so you can perfectly fix the couplings to the rod
- Fixed couplers are used to connect the motors step by step, servo AC DC to the spindle
- Widely used to build CNC router, CNC Plasma, CNC Mill, CNC Laser, many automation machines and on occasion of mechanical transmission
- Material: Aluminum Alloy
- Coupler height (L): 25 mm
- Outside diameter: 14mm
- Shaft diameter: 5mm / 5mm
- Screws Position: 4mm
- Flexible Shaft Couplers 5mm*5mm

Shaft Coupling Motor Connector 5mm 8mm CNC features:
- Fixed coupler in high quality aluminum
- They incorporate 4 captive screws so you can perfectly fix the couplings to the rod
- Fixed couplers are used to connect the motors step by step, servo AC DC to the spindle
- Widely used to build CNC router, CNC Plasma, CNC Mill, CNC Laser, many automation machines and on occasion of mechanical transmission
- Material: Aluminum Alloy
- Coupler height (L): 25 mm
- Outside diameter: 14mm
- Shaft diameter: 5mm / 8mm
- Screws Position: 4mm
- Flexible Shaft Couplers 5mm*8mm

Shelly 1 is a universal smarthome relay enabled to work with all the key smart home systems, including Google Home and Amazon Alexa, as well as an original Shelly solution Shelly Cloud

Ideal to control the speed of DC motors. Speed controller for DC motor (PWM) 10V-30VDC 3A 120W features:
- Input voltage: 10-30VAC
- Max output DC current: 3A (max 4A)
- Max power: 120W (in case input voltage> 24V)
- Dimensions: 74x47x28mm
- PWM frequency: 500kHz
- Duty Cycle adjustable: 5% -95%
Please note that the voltage applied to the motor will be the supply voltage applied to the circuit

The Tinkerkit Braccio Robot, is a fully operational and functional robot arm, with 6 degrees of freedom, easily controlled through Arduino. It can be assembled in different ways to use it in the applications that are required, such as moving objects, connecting a camera or a solar panel.

Discover the unlimited potential of robotics and mechanics with BRACCIO!