Speed controller for DC motor (PWM) 10V-30VDC 3A 120W
  • Speed controller for DC motor (PWM) 10V-30VDC 3A 120W
  • Speed controller for DC motor (PWM) 10V-30VDC 3A 120W
  • Speed controller for DC motor (PWM) 10V-30VDC 3A 120W

Speed controller for DC motor (PWM) 10V-30VDC 3A 120W

A0087

Ideal to control the speed of DC motors. Speed controller for DC motor (PWM) 10V-30VDC 3A 120W features:
- Input voltage: 10-30VAC
- Max output DC current: 3A (max 4A)
- Max power: 120W (in case input voltage> 24V)
- Dimensions: 74x47x28mm
- PWM frequency: 500kHz
- Duty Cycle adjustable: 5% -95%
Please note that the voltage applied to the motor will be the supply voltage applied to the circuit

OEM
5905323236264
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Speed controller for DC motor (PWM) 10V-30VDC 3A 120W description

Ideal to control the speed of DC motors.

Speed controller for DC motor (PWM) 10V-30VDC 3A 120W features:

- Input voltage: 10-30VAC
- Max output DC current: 3A (max 4A)
- Max power: 120W (in case input voltage> 24V)
- Dimensions: 74x47x28mm
- PWM frequency: 500kHz
- Duty Cycle adjustable: 5% -95%
Please note that the voltage applied to the motor will be the supply voltage applied to the circuit p >

Data sheet

Voltages
Hasta 30V
Intensidad de corriente
5A
Potencia
120W

Customers who bought this product also bought

W1209 12V DC Thermostat Digital Temperature Controller Switch

W1209 12V DC Thermostat Digital Temperature Controller Switch features:
- Model: W1209
- Supply voltage: DC 12V
- Temperature control mode: ON / OFF
- Temperature range: -50 -110 ° C
- Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C
- Measurement accuracy: 0.1 ° C
- Refresh rate: 0.5 s
- Temperature protection 0-110 ° C
- Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA
- Power of output: 10A relay
- Sensor probe: NTC waterproof sensor (10K 0.5%)
- Environmental requirements: -10 ~ 60 ° C Humidity 20% -85%
- Dimensions: 48 x 40 mm

M0102

Price €3.13

Fan 12V 2x Cable 50x50x15 3D Printer Reprap

Fan 12V 2x Cable 50x50x15 3D Printer Reprap features:
- Voltage: 12V
- Speed: 7000rpm ± 10%
- Screw diameter: 4.5mm
- Time lifespan: 50,000 hours
- Operating temperature: -10 ° C to 70 ° C
- Cable length: 28cm
- Dimensions: 50mm x 50mm x 10mm

I0120

Price €1.73

DS18B20 Waterproof Digital Temperature Sensor Probe 3m

Encapsulated with water resistant stainless steel with sensor dimensions 6 * 50mm, cable length 300 cm. DS18B20 Waterproof Digital Temperature Sensor Probe 3m features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 ° C to 125 ° C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
             - Vcc red
             - Yellow digital output
- Inocidable steel
- Cable length: 3m

S0008

Price €4.01

3.5 inch LCD TFT Acrylic Case for Raspberry Pi

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case 

RA018

Regular price €3.64 -25% Price €2.73

SparkFun Biomedical sensor pad set 10pcs

This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel.

This is not a medical device and is to be used for strictly educational purposes.

SP029

Price €10.70

Cable Double Red Black Flexible 26AWG PVC - 1m

Double Cable 26AWG Red Black Flexible PVC - 0,13mm² Prototype features:
- Ideal for your electronic projects.
- Length: 1m
- Conductor: flexible copper
- Insulation: PVC
- Low voltage electric cables
- Cable type: 26AWG
- Resistance to 20ºC: 133.9 Ohm / Km
- Diameter: 0.40mm

K0093

Price €1.12

Red Laser Diode Module 650nm 5mW 6mm 5V lL2N4

This module adapted for the arduino includes a laser diode and a 3-pin connector for a simple and quick adaptation with the Arduino. The diode is mainly used for laser toys, all kinds of level meter, instruments, stylus pen, mini LCD projector, remote listeners laser, alarm anti-theft light remote control. Light shots and different display can make the color of the image element a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC
- Connector of 3 pins:
1- GND
2- VCC
3- Light control of the laser diode
- Point mode: point facula
- Continuous output
- Operating temperature: -36 ° C - + 65 ° C
- Laser wavelength: 650nm (red)

M0077

Price €1.23

HX711 Module Weighing Pressure Sensor 24 Bits

The module uses a 24-bit high precision A/D conversion chip HX711.
The input circuit can be configured to provide a bridge.
The electric bridge voltage sensor model (such as pressure, weight) is an ideal sampling module with high precision and low cost. HX711 Module Weighing Pressure Sensor 24 Bits features:
- Two selectable differential input channels
- Active low noise PGA with selectable gain of 32, 64 and 128
- Power supply regulator for load cell and ADC analog power supply
- Oscillator on chip that does not require external component with optional external glass
- Power-on-reset on the chip
- Simple serial control and serial interface: controls driven by pins, programming is not required
- Output data rate 10SPS or 80SPS selectable

M0118

Regular price €2.31 -€0.39 Price €1.92
€6.19

6,19 tax excl.

1
21 items
Price €6.19

Order until 4pm we will send today
30 days return