ZPHS01B is an all-in-one air quality module, which integrates laser dust sensor, infrared CO2 sensor, electrochemical formaldehyde, ozone and carbon monoxide sensors, VOC sensor, NO2 sensor, temperature and humidity sensor.

The 6 DOF - 6-axis black aluminium arm is widely used in the field of teaching, personal production and amateur education, it can be seen as a demonstration platform with multiple degrees of freedom, its power system consists of six servo motors. So the arm can move, sideways and sideways, up and down, left and right to grasp any object. It comes with 6 servos already in set.

Amplifier for speakers, especially for cars, dual channel and with subwoofer. It operates at 12/24V and offers an output power of 50W for each channel + 100W subwoofer. Create your 2.1 speaker system with this amplifier.

The kit includes the UNO R3 Arduino compatible board and DIY protection box. UNO R3 Arduino board compatible has an Atmega328P chip running at 16Mhz with factory loaded bootloader. The module has all the connectors as the Arduino Uno R3 and is compatible with all Arduino shields. DIY protection box for Arduino UNO R3 made of high quality acrylic material.

The Arduino Engineering Kit Rev 2 is a versatile and practical learning tool. By creating fun, real-world projects, you can understand basic engineering and mechatronics concepts and learn to program in MATLAB and Simulink. The versatility of the elements gives you the opportunity to adapt the content and create your own curriculum based on it. The kit includes online courseware, step-by-step instructions, lessons and exercises. It works best when studying in small groups.

Arduino Mega 2560 R3  A000067 has been designed with larger and more ambitious projects in mind. It has 54 digital input / output pins (15 of which can be used as PWM outputs), 16 analog inputs, 4 UART (i.e. hardware serial ports). The large number of analog and digital pins, along with larger MEMORY, make the Mega 2560 ideal for devices such as 3D printers and other demanding applications. The Mega 2560 board is compatible with most shields designed for Arduino Uno.

The Portenta Breakout module extends the capabilities of the Arduino Portenta module with additional connectors and cables. The module includes a power switch, a DIP switch for selecting the start mode of the Arduino Portenta, as well as a series of connectors: USB A, RJ5, microSD, OpenMW, MIPI 20T JTAG. The board also includes the RTC chip, as well as a slot for the CR2032 battery, a screw connector for the power supply and all the cables for the Arduino Portenta module.

Imagine the simplicity of the Arduino One connected to the communication module. Seems too good to be true, right? That's Arduino One WiFi. Arduino Uno WiFi REV2 (ABX00021) with its integrated IMU (Inertial Measurement Unit) and WiFi is the ideal board to start making your first Internet application from scratch, or to use in the educational field. It has 14 digital input / output pins (5 of which are PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, an accelerometer, an RGB LED, a power connector and an ICSP header.

Barometric Pressure, Temperature and Altitude Sensor BMP180 features:
- Module based on the atmospheric pressure sensor BMP180
- Supply voltage: 1.8 - 3.6 V
- Energy consumption: 0.5uA
- I2C interface
- Measuring range: 300 - 1100hPa
- Dimensions: 10 x 13 mm
- Includes soldering pins

Basic Kit Soldering Iron 40W + Tin Roll + Mesh + Support Free Soldering Kit features:
- Tin soldering iron 40W 230V
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long tip length 1mm
- Anti-thermal handle
- Certifications CE, RoHS and TUV
- Rollo tin 10gram welding wires 1mm
- Copper mesh for desoldering 2mm / 1.5m
- FREE mini soldering iron holder

18650 battery base for soldering to PCB. Characteristic: - Measurements 78x 20x 21mm
- Weight: 10 gr. ( approx.)
- Stack length max 67mm

Battery holder for 18650 batteries connected in series.

Base of two 18650 batteries to solder on PCB. Characteristic: - Measurements 78x 40x 21mm
- Weight: 10 gr . (approx.)
- Stack length max 67mm

Battery Holder Button 3V CR2032 PCB CR2032 PCB features:
- Battery compartment for PCB printed circuit
- Quantity: 1 unit

LITHIUM POLYMER BATTERY Battery LIPO 1520mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 1520 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 51 mm -Battery width / diameter- 34mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2450mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2600mAh 3.7V

LITHIUM POLYMER BATTERY Battery LIPO 2650mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2650 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 71 mm -Width / diameter of the battery- 95 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2750mAh 3.7V