A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick.
Technical data:
- width: 1.0mm
- diameter from 27mm to 80mm
- thickness: from 0.5 to 1mm
Quantity tolerance +/- 5%

A set of flat drive belts with a diameter from 27mm to 80mm. The kit includes approximately 50 pieces of strips from 0.5 mm to 1 mm thick.
Technical data:
- width: 0.5 mm
- diameter from 27 mm to 80 mm
- thickness: from 0.5 to 1 mm
Quantity tolerance +/- 5%

CR-10 is a pre-assembled kit, it comes with three parts. It only takes about 10 minutes to build it. CR-10 makes your connectivity easier by grouping the wiring into simple direct connections to the fully assembled external 3D printer electronics box. This 3D printer has a volume of 300 x 300 x 400 print, which makes it a valid machine for a large number of applications. The results of CR-10 are professional and will be available to any user. It has a large and very stable structure, to provide precision in its movements and avoid vibrations and inertias. Creality3D Printer CR-10 features:
- can print large models, the maximum print size is 300x300x400mm / 11x11x15 inches.

UV photosensitive resin for 3D DLP LCD printers Red Color 500g It is compatible with all UV DLP, laser or LCD resin printers. Safe formula, which reduces odor and irritation. It allows us a quick impression since its design has been created to reduce training times. Note! Recommendations for use for resin for 3D printers: - Use gloves for handling while it is liquid. (It is not necessary once it is solid). - It is recommended to shake the resin before use and store it in places hidden from sunlight. - Avoid contact with food - Keep out of the reach of children Resin developed by Creality. Package of 500g.

UV photosensitive resin for 3D DLP LCD printers Red Color 500g It is compatible with all UV DLP, laser or LCD resin printers. Safe formula, which reduces odor and irritation. It allows us a quick impression since its design has been created to reduce training times. Note! Recommendations for use for resin for 3D printers: - Use gloves for handling while it is liquid. (It is not necessary once it is solid). - It is recommended to shake the resin before use and store it in places hidden from sunlight. - Avoid contact with food - Keep out of the reach of children Resin developed by Creality. Package of 500g.

UV photosensitive resin for 3D DLP LCD printers Red Color 500g It is compatible with all UV DLP, laser or LCD resin printers. Safe formula, which reduces odor and irritation. It allows us a quick impression since its design has been created to reduce training times. Note! Recommendations for use for resin for 3D printers: - Use gloves for handling while it is liquid. (It is not necessary once it is solid). - It is recommended to shake the resin before use and store it in places hidden from sunlight. - Avoid contact with food - Keep out of the reach of children Resin developed by Creality. Package of 500g.

The batteries are manufactured on a modern production line. They have a gel-shaped electrolyte, so they are maintenance-free batteries. They are characterized by their durability and a very favorable value for money. Gel Battery 12V 0.8Ah features:
Long service life-both on the job and on the cyclic damper. No delamination effect of gelled electrolyte. Tolerates high operating temperatures. Fully returns to initial deep discharge volume. Very high performance. Capacity (Ah): 0.8 Tensi Nominal ion (V): 12 LxAnxAl dimensions (mm): 96x28x61 Gross weight (kg): 0.32

PLA Lavender Filament 3mm 1kg for 3D Printer features:
- 3mm filament
- Premium Coil for 3D Printer
- 1 kg coil

Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC

12V Momentary LED Pushbutton Red 16mm N/A NO features:
- Type of operation: momentary (automatic return)
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Red

Anti-Adhesive No-Fat Dry Spray Based on PTFE. Dry, no-fat, anti-adhesive agent based on pure PTFE. Perfect greasing solution for surfaces that must be slippery, especially when it is required to protect them against contamination present in the environment. Very low friction factor.

- Caja Case Shell Box
- Carcasa para Raspberry Pi 2 and Pi 3, B and B+
- Color transparente
- Dimensión: 89x70x25mm

CPU Model: Allwinner H5
Number of Cores: 64-bit Quad-Core
Frequency:4* Cortex-A53 1.5GHz Memroy RAM: 1GB DDR3 Storage eMMC: 8GB
MicroSD Slot: MicroSD*1 for external storage up to 128GB Connectivity Ethernet: Gbps Ethernet, RTL8211E-VB-CG chip
WiFi: 802.11b/g/n
Bluetooth: 4.0 dual mode
Antenna: IPX Connector*1 Audio Input/Output: 2.0mm pitch 5 pin-header USB USB 2.0*1: USB 2.0 Host Type A
USB pin header*2
MicroUSB*1: Power input(5V/2A) Pin-header GPIO 1: 24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO GPIO 2:
12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO Serial Debug Port: 2.54mm pitch 4pin-header Button Power Key*1
Reset Key*1
MASKROM(BOOT) Key*1

PETG Transparent Filament 1.75mm 1kg features:
- Premium Coil for 3D Printer
- 1000g coil
- Extrusion temperature: 220ºC - 250ºC
- Hot bed temperature / Hotbed: 40ºC- 70ºC  

White Flexible TPU 3D Printing Filament 1.75mm 800g features:
- Premium Coil for 3D Printer
- 800g coil

- Use the right tool for every need.
- It is a special electrostatic brush for cleaning electronic components or places where the electrostatic charge has to be taken into account. Electrostatic Brush ZD-155H 255 mm features:
- Model: ZD-155H
- Brush length: 255 mm
- Hair length: 32 mm
- Number of hair groups: 17

The decode card with 5V amplifier is applied with the speaker directly. It has a support feeding memory. Mini USB TF Card MP3 Player Decoder with IR Remote Control Player features:
- Power supply: 5 VDC
- FAT16 support, FAT32 file system
- Compatible with MP1 Layer3, MP2 Layer3, MP3 Layer3 version of the song
- Can read the U disk, MP3 songs from the TF card
- "TF" Jack: Connecting the MP3 song with SD or MMC card can play automatically
- "USB": U disk Jack, connect MP3 songs with U disk can play automatically
- "Play / Pause": on the USB / SD short press to play / Pause
- Support for Bluetooth, you need to buy a USB Bluetooth device to support the use
- Two-channel audio output, suitable for car and amplifier in the installation

It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 5V Blue Backlight 8x2 JMD0802B 2 White Characters features:
- Operating voltage: 5V
- Model JMD0802B see: 2
- Matrix of points: 8x2
- Size of the viewing area: 38x16 mm
- Linear controller controller: AIP7660E0 8 pin N-FET
- Size: 58x32x13.2 mm

The pixel board is equipped with a WS2812 that is actually RGB LED with a WS2811 built into the LED.
Several of these individual sessions can be chained together to form a screen or an addressable string.
Each LilyPad is creatively designed to have large connecting pads so that they can be sewn on clothes. Pixel Board WS2812 for Lilypad features:
- Use the WS2812S chip
- RGB color lights
- Each LED can be controlled individually
- You only need one control line and two power cables
- Arduino libraries and routines available
- Density of the PCB: 0.8 mm
- Size: 20x3 mm

ABS Grey Filament for 3D Printer 1.75mm 1kg features:
- Premium Coil for 3D Printer

ABS Fluo Orange Filament 1.75mm 1kg for 3D Printer features:
- Premium Coil for 3D Printer

ABS Blue Filament 1.75mm 1kg for 3D Printer features:
- Premium Coil for 3D Printer

ABS Yellow Filament 1.75mm 1kg for 3D Printer features:
- Premium Coil for 3D Printer

ABS Orange Filament 1.75mm 1kg for 3D Printer features:

- Premium Coil for 3D Printer

ABS Red Filament 1.75mm 1kg for 3D Printer features:
- Premium Coil for 3D Printer

ABS White Filament 1.75mm 1kg for 3D Printer features:
- Premium Coil for 3D Printer

Flexible Coupler 5mm/6.35mm Z-Axis 3D CNC Printer features:
- High quality flexible aluminum coupler with which you can connect Nema 17, 5mm stepper motors to a 6.35 mm threaded rod
- They incorporate 4 captive screws so that you can perfectly fix the couplings to the rod
- Material: Aluminum alloy
- Coupler height (L): 25 mm
- Outside diameter: 18mm
- Shaft diameter: 5mm / 6.35mm - Quantity 2units

Power supply DC 24V 5A 120W features:
- Supply voltage: 110 / 230V AC
- Output voltage: 24V DC - Output amperage: 5A
- Power at 24V: 120W
- Dimensions: 199mm x 99mm x 43mm
- With LED Strip

Screen OLED 1.3" A Blue 128x64 SPI/I2C features:
- Oled 1.3 "128 * 64 pixel screen
- Drive IC model SH1106
- Power: 3V-5.5V - Viewing angle: 160 degrees
- SPI interface (I2C can be changed)
- Low consumption 0.08W
- Use temperature: -20 to 70 ºC
- PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption

Ceramic Grease Spray Non-stick Antifriction 100ml features:
The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C. Prevents the €˜seizure€™ of metals. Anti-corrosion and anti-seizure properties - excellent protection. Facilitates dismounting of the pre-lubricated parts. It does not contain metal compounds or silicone. It is resistant to chemicals, water and weather conditions. Application:  - Installation of boilers, furnaces, motors, heating systems, water pumps
- Exhausts, manifold mounting screws, heads, hubs
- Breaking systems, ABS, ASR and ESP systems

Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips features:
- Pyrography type pencil, with 6 replacement tips with different shapes and thicknesses. Ideal for carpentry and joinery
- Can be used on different materials, the most common are wood, leather and rubber, but can also be used with other materials
- Number of nozzles: 6 units
- Power: 30W
- Voltage: 220-240V
- Caution: do not touch the tip of the pyrograph while it is hot. Change the mouthpiece with tweezers or wait for it to cool
- Certifications CE, RoHS, LVD

Transparent housing for Raspberry Pi 2, Pi3 Model B, B+ features:
- Case Case Shell Box
- Housing for Raspberry Pi 2 and Pi 3, B and B +
- Transparent color
- Made of ABS
- Dimension: 95x 62x 26mm

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tablet
The advantages of LED COB:
- A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Opening angle of up to 160º

Arduino Mega2560 dimensional motherboard to build a Mega by yourself

Ideal for car, motorcycle, does not need a battery.
Voltmeter LED Waterproof Digital Display Red 3,5V 30V 0,56 features:
- Measuring range: from 3.5 VDC to 30 VDC ±% 1
- Operating current: <30mA
- Measuring refresh time: 500ms
- Dimensions: 54mm x24mm x15mm
- Cable length: 85 mm
- Color: black
- Screen: Red LED
- Operating temperature: -10ºC to 65ºC

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.
The advantages of LED COB:
- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light
Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.