Ultrasound Distance Sensor HC-SR05 Ultrasonic sensors overcome many of the weaknesses of IR sensors by providing distance measurement regardless of the color and illumination of obstacles. Ultrasound Distance Sensor HC-SR05 features:- Power supply: 4.5-5.5 VDC - Supply current: 10 to 40 mA - Activation pin format: 10 μs digital pulse - Echo Pin Output: 0-Vcc - Echo Pin Format: the output is DIGITAL and directly proportional with range. See our conversion formula below - Measurement range: 2cm to ~ 4.5m - Measurement resolution: 0.3cm - Measurement angle: up to 15 degrees - Measurement speed: 40 Hz, - Connector: standard 5-pin male connector that can be connected directly to boards or breadboards: - 1: VCC - 2: Trig - 3: Echo Code S0047 ✗ Out-of-Stock Price €1.61
2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 ✗ Out-of-Stock Regular price €9.88 -€2.40 Price €7.48
Attiny85 Digispark USB Development Board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and have your own on the digispark wiki. Attiny85 Digispark USB Development Board features: -USB power supply -External power supply (7v-35v DC 12v maximum recommended) -5V DC 500mA regulator on board -Programmable with the Arduino IDE -Loaded with Micronucleus bootloader Code B0001 Last items in stock Price €4.09
XDS100V2 Emulator DSP/ARM CCS4/5/6 XP/ WIN7/8/10 00IC USB2.0 Supports TI DSP/Core The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for IT processors.The XDS100 family presents the lowest cost of the entire XDS family of debug probes while supporting the traditional JTAG standard (IEEE1149.1).In addition, all XDS debug probes support Core and System Trace on all ARM and DSP processors that have an Embedded Trace Buffer (ETB). The Spectrum Digital XDS100v2 connects to the target board via a 14-pin TI connector and to the computer via high-speed USB 2.0 (480 Mbps).It also requires a license of Code Composer Studio „¢ IDE running on the computer.Support for Code Composer Studio V4 (Does not support Code Composer Studio V3.3). XDS100V2 Emulator DSP/ARM CCS4/5/6 XP/ WIN7/8/> Code B0041 Last items in stock Price €40.45
LattePanda V1 - A powerful 2GB/32GB mini-PC This is a LattePanda (DFR0444) with 2GB RAM and 32GB EMMC memory. The minicomputer is equipped with a 1.92 GHz Intel Cherry Trail Z8350 Quad Core processor. In addition, it has WiFi, Bluetooth 4.0, 2x USB 2.0, 1x USB 3.0, microSD slot, Ethernet port and an additional ATmega32u4 microcontroller with 20 GPIO pins known from Arduino. This version comes with Windows 10 installed, but does not include a Windows 10 activation key. Code DF023 Available Regular price €125.95 -€12.00 Price €113.95
NanoPi NEO Plus2 CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency:4* Cortex-A53 1.5GHz Memroy RAM: 1GB DDR3 Storage eMMC: 8GB MicroSD Slot: MicroSD*1 for external storage up to 128GB Connectivity Ethernet: Gbps Ethernet, RTL8211E-VB-CG chip WiFi: 802.11b/g/n Bluetooth: 4.0 dual mode Antenna: IPX Connector*1 Audio Input/Output: 2.0mm pitch 5 pin-header USB USB 2.0*1: USB 2.0 Host Type A USB pin header*2 MicroUSB*1: Power input(5V/2A) Pin-header GPIO 1: 24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO GPIO 2: 12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO Serial Debug Port: 2.54mm pitch 4pin-header Button Power Key*1 Reset Key*1 MASKROM(BOOT) Key*1 Code B0046 ✗ Out-of-Stock Price €43.72
BeagleBone® Black Industrial SBC Seeed Studio Development Board (AM335x Ethernet) BeagleBone Black Industrial (102110423) is designed as a single board industrial computer (SBC). It uses the BeagleBone Black open source hardware design and supports temperatures from -40ºC up to 85ºC. Code SS024 Backorder Price €66.07
BeagleBone® Green SBC Seeed Studio Development Board (AM335x Ethernet) BeagleBone Green (102010027) is a powerful single board computer (SBC). The main change is the replacement of the HDMI interface with 2 Grove connectors. Grove is a great invention by Seeed, it is a standardised modular connector prototyping system that allows for solder- and cable-free applications. It uses the open source hardware design BeagleBone. Code SS045 Last items in stock Price €56.16
Jetson Nano Developer Kit (4GB) by NVIDIA NVIDIA® Jetson Nano ™ Developer Kit is a small computer with powerful capabilities that allows you to run multiple neural networks in parallel for applications such as image classification, segmentation, speech processing and object detection. All this in an easy-to-use platform that runs on just 5 watts. Thanks to this board, the power of modern Artificial Intelligence is now available to Makers, students and embedded developers everywhere. Discover the power of AI and robotics with the powerful 4GB NVIDIA Jetson Nano Developer Kit. Now educators, students, and any enthusiast can easily perform AI projects quickly and efficiently using their GPU-accelerated NVIDIA software. Code RA095 ✗ Out-of-Stock Price €198.34
NVIDIA Jetson Nano Module, Small AI SOM, 4GB/16GB EMMC NVIDIA Jetson Nano Module (B01), Production-Ready AI System On Module (SOM), 4GB 64-bit LPDDR4 with 16GB EMMC Flash. Code RA152 Last items in stock Price €137.11
DSP Learning Board ZQ28335 DSP28335 Microprocessor TMS320F28335 This product is a ZQ28335 development chart for learning including a TMS320F28335 processor with very broad features:. DSP Learning Board ZQ28335 DSP28335 Microprocessor TMS320F28335 features: - Main processor TMS320F28335 32-bit digital high-speed floating point processor, the maximum working frequency is 150 MHz- Memory on the chip: FLASH: 256Kx16 bit; SRAM: 34Kx16bit; Boot ROM: 8Kx16bit; OTP ROM: 1Kx16bit- Peripherals on the chip: ePWM (improved PWM version): 12 tracks; HRPWM (high resolution PWM): 6 tracks; EQEP (enhanced version orthogonal coding pulse unit): 2 channels; ADC: 2X8 channels, 12 bits, 80 ns conversion time, 0 ~ 3V range Code B0043 ✗ Out-of-Stock Price €75.00
Touch Board - Development board for Electric Paint - Bare Conductive This development board is specially designed to work with the Bare conductive Electric Paint, which makes it possible to convert touch into sound, light or any action you want. With its 12 capacitive electrodes you can create a multitude of innovative projects and scenes, combining them with the Electric Paint. It has an MP3 decoder and a MIDI synthesizer, as well as a 3.5 mm audio connector and support for micoSD cards (includes 128 MB microSD). It is based on the Arduino Leonardo and uses the ATmega32U4, which works at 16MHz and 5V. Do projects on touch and interactive proximity detection in a different and simple way thanks to this Touch Board. Code RA119 ✗ Out-of-Stock Regular price €70.17 -€2.00 Price €68.17
Attiny85 Digispark USB Development Board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and have your own on the digispark wiki. Attiny85 Digispark USB Development Board features: -USB power supply -External power supply (7v-35v DC 12v maximum recommended) -5V DC 500mA regulator on board -Programmable with the Arduino IDE -Loaded with Micronucleus bootloader Code B0001 Last items in stock Price €4.09
XDS100V2 Emulator DSP/ARM CCS4/5/6 XP/ WIN7/8/10 00IC USB2.0 Supports TI DSP/Core The Spectrum Digital XDS100v2 is the second generation of the XDS100 family of debug probes (emulators) for IT processors.The XDS100 family presents the lowest cost of the entire XDS family of debug probes while supporting the traditional JTAG standard (IEEE1149.1).In addition, all XDS debug probes support Core and System Trace on all ARM and DSP processors that have an Embedded Trace Buffer (ETB). The Spectrum Digital XDS100v2 connects to the target board via a 14-pin TI connector and to the computer via high-speed USB 2.0 (480 Mbps).It also requires a license of Code Composer Studio „¢ IDE running on the computer.Support for Code Composer Studio V4 (Does not support Code Composer Studio V3.3). XDS100V2 Emulator DSP/ARM CCS4/5/6 XP/ WIN7/8/> Code B0041 Last items in stock Price €40.45
LattePanda V1 - A powerful 2GB/32GB mini-PC This is a LattePanda (DFR0444) with 2GB RAM and 32GB EMMC memory. The minicomputer is equipped with a 1.92 GHz Intel Cherry Trail Z8350 Quad Core processor. In addition, it has WiFi, Bluetooth 4.0, 2x USB 2.0, 1x USB 3.0, microSD slot, Ethernet port and an additional ATmega32u4 microcontroller with 20 GPIO pins known from Arduino. This version comes with Windows 10 installed, but does not include a Windows 10 activation key. Code DF023 Available Regular price €125.95 -€12.00 Price €113.95
NanoPi NEO Plus2 CPU Model: Allwinner H5 Number of Cores: 64-bit Quad-Core Frequency:4* Cortex-A53 1.5GHz Memroy RAM: 1GB DDR3 Storage eMMC: 8GB MicroSD Slot: MicroSD*1 for external storage up to 128GB Connectivity Ethernet: Gbps Ethernet, RTL8211E-VB-CG chip WiFi: 802.11b/g/n Bluetooth: 4.0 dual mode Antenna: IPX Connector*1 Audio Input/Output: 2.0mm pitch 5 pin-header USB USB 2.0*1: USB 2.0 Host Type A USB pin header*2 MicroUSB*1: Power input(5V/2A) Pin-header GPIO 1: 24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO GPIO 2: 12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO Serial Debug Port: 2.54mm pitch 4pin-header Button Power Key*1 Reset Key*1 MASKROM(BOOT) Key*1 Code B0046 ✗ Out-of-Stock Price €43.72
BeagleBone® Black Industrial SBC Seeed Studio Development Board (AM335x Ethernet) BeagleBone Black Industrial (102110423) is designed as a single board industrial computer (SBC). It uses the BeagleBone Black open source hardware design and supports temperatures from -40ºC up to 85ºC. Code SS024 Backorder Price €66.07
BeagleBone® Green SBC Seeed Studio Development Board (AM335x Ethernet) BeagleBone Green (102010027) is a powerful single board computer (SBC). The main change is the replacement of the HDMI interface with 2 Grove connectors. Grove is a great invention by Seeed, it is a standardised modular connector prototyping system that allows for solder- and cable-free applications. It uses the open source hardware design BeagleBone. Code SS045 Last items in stock Price €56.16
Jetson Nano Developer Kit (4GB) by NVIDIA NVIDIA® Jetson Nano ™ Developer Kit is a small computer with powerful capabilities that allows you to run multiple neural networks in parallel for applications such as image classification, segmentation, speech processing and object detection. All this in an easy-to-use platform that runs on just 5 watts. Thanks to this board, the power of modern Artificial Intelligence is now available to Makers, students and embedded developers everywhere. Discover the power of AI and robotics with the powerful 4GB NVIDIA Jetson Nano Developer Kit. Now educators, students, and any enthusiast can easily perform AI projects quickly and efficiently using their GPU-accelerated NVIDIA software. Code RA095 ✗ Out-of-Stock Price €198.34
NVIDIA Jetson Nano Module, Small AI SOM, 4GB/16GB EMMC NVIDIA Jetson Nano Module (B01), Production-Ready AI System On Module (SOM), 4GB 64-bit LPDDR4 with 16GB EMMC Flash. Code RA152 Last items in stock Price €137.11
DSP Learning Board ZQ28335 DSP28335 Microprocessor TMS320F28335 This product is a ZQ28335 development chart for learning including a TMS320F28335 processor with very broad features:. DSP Learning Board ZQ28335 DSP28335 Microprocessor TMS320F28335 features: - Main processor TMS320F28335 32-bit digital high-speed floating point processor, the maximum working frequency is 150 MHz- Memory on the chip: FLASH: 256Kx16 bit; SRAM: 34Kx16bit; Boot ROM: 8Kx16bit; OTP ROM: 1Kx16bit- Peripherals on the chip: ePWM (improved PWM version): 12 tracks; HRPWM (high resolution PWM): 6 tracks; EQEP (enhanced version orthogonal coding pulse unit): 2 channels; ADC: 2X8 channels, 12 bits, 80 ns conversion time, 0 ~ 3V range Code B0043 ✗ Out-of-Stock Price €75.00
Touch Board - Development board for Electric Paint - Bare Conductive This development board is specially designed to work with the Bare conductive Electric Paint, which makes it possible to convert touch into sound, light or any action you want. With its 12 capacitive electrodes you can create a multitude of innovative projects and scenes, combining them with the Electric Paint. It has an MP3 decoder and a MIDI synthesizer, as well as a 3.5 mm audio connector and support for micoSD cards (includes 128 MB microSD). It is based on the Arduino Leonardo and uses the ATmega32U4, which works at 16MHz and 5V. Do projects on touch and interactive proximity detection in a different and simple way thanks to this Touch Board. Code RA119 ✗ Out-of-Stock Regular price €70.17 -€2.00 Price €68.17