Chemical Components

Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)
- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)
-the keyboard and the LCD screen

Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 41.5x28.2x0.3mm

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 011 features:
- Mixing ratio: 100: 8,
- Density: 0.97g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 021 features:
- Manufacturer: TermoPasty,
Mixing ratio: 100: 10,
Thermal conductivity: 1.2 W / mK,
Density: 1.12g / cm3,
Pre-crosslinking: 30-40 min,
Working temperature from -50ºC to + 200ºC,

The compound perfectly protects the electronics from negative environmental characteristics and protects sensitive modules from vibrations.
The silicone gel is crystalline, resistant to UV light and, therefore, is the perfect material for LED applications.
After curing, it is very soft.
Creates an excellent electrical insulation.
It has a wide range of temperatures, from -55 ° C to 200 ° C.
Silicone compound 031 Double-component gel features:
- Mixing ratio: 3: 2,
- Density: 0.98g / cm3,
- Pre-crosslinking: 50-60 min,
- Working temperature from -50ºC to + 180ºC,
- Viscosity at 25ºC: 2000 cP,
- Transparent color.
Mode of use:
- Clean, degrease and dry the system.

The product is a liquid, two component encapsulation mixture.
The curing takes place at room temperature.
The material provides thermal conductivity and low expansion.
Ideal for encapsulating or filling gaps in electronic heat generating components with metal enclosures or heat sinks.
It has an excellent fluidity when dosing and encapsulating.
After curing, it does not detach due to cyclic heating of the surface to which it adheres.
The cured product is dry to the touch.
Two-component silicone encapsulating compound 029 features:
- Manufacturer: TermoPasty,
- Mixing ratio: 100: 10,
- Thermal conductivity: 2 W / mK,
- Density: 1.15g / cm3,
- Pre-crosslinking: 30-40 min,
- Working temperature from -50ºC to + 200ºC,

Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides.

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features:
A protective film, transparent.
Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.
Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.
PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.
-Temperature of application: -40°C + 60°C.
-Operating temperature: -50°C + 150°C.

Self-adhesive label remover - removes labels form all kinds of packaging. Caution: the preparation may imperceptibly dissolve a colorful print under the removed label as well as dissolve some plastics - caution recommended!

Silicone and Protective Grease with Teflon 60g features:
- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
- Silicone and Protective Grease with Teflon 60g features:
a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment

A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - Made in EU
- No to the most usual materials of electrical systems

Cleaning of AG Printer Spray 400ml features:
- An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers

Ultrasonic Cleaning Liquid 1 litre features:
Suitable for use in ultrasonic baths, this cleaner completely removes all traces of contamination including light oils, silicones, etc.

Aqueous PCB cleaner
Water-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.
It causes the saponification of the rosin and the dissolution of the flow residues.
Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.
Does not attack metal and aluminum surfaces.
Water-Based Cleaner PCB features:
- Type of chemical preparation: aqueous stripper of PCB printed plates
- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components
- Form: Liquid
- Capacity: 1l

Liquid Flux Alcohol Base TK83 100ml 
Flux liquid alcohol based for electronic welding. Type of flux: rosin
No Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC.

Flux gel 100cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases).

Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. 

Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. 

Third hand stand for easy soldering of wires with a diameter from 1 to 5mm. Number of holes 5.