Thermally Conductive Silicone Paste H 100g Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors. Code Q0038 Last items in stock Price €5.49
Thermally Conductive Silicone Paste H 7g Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K Code Q0051 Available Price €1.45
AG Extreme thermal grease 3g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK. Code Q0087 Available Price €6.85
AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €9.85
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK. Code Q0089 Available Price €3.90
AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.Thermal conductivity:> 2.8 W / mK, Code Q0090 Available Price €4.25
AG Extreme thermal grease 1g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. The application method guarantees simplicity of use, and the product can be easily applied to various computer accessories and LEDs. Ideal as a heat transmitter from the heat pipe condenser to the heat exchanger in a vacuum solar collector. Thermal conductivity: 6 W / mK. Code Q0091 Available Price €3.75
Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum. Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Code Q0097 Last items in stock Price €3.19
Grease for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Code Q0098 Last items in stock Price €3.79
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.59
Machine Cup Grease with Dispenser 65ml Machine Cup Grease with Dispenser 65ml features: - Product designed for lubrication of various bearings, joints and guideways. It works in temperatures from -24°C to 135°C at high loads. Resistant to washing-out with cold water. Provides protection against corrosion Code Q0062 Available Price €3.49
Grease TF silicone + PTFE 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Last items in stock Price €3.39
Grease TF silicone + PTFE 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Last items in stock Price €1.29
Grease TF silicone + PTFE 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 ✗ Out-of-Stock Price €6.49
AG Silver thermal grease 1g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive. Thermal conductivity:> 3.8 W / mK, Code Q0092 Available Price €2.19
Thermal Paste Syringe 3.1W / mK - AG Copper Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features: - The thermal conductivity of ~ 3.1 W/mK- Not suitable for aluminum radiators- No driver- 1,5ml content Code Q0042 Available Price €2.95
Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.95
Silicone Thermal Paste Syringe 25g Silicone Thermal Paste Syringe 25g features: - Density at 20°C: 2.58 G/cm3- Flashpoints: 350°C- Freezing point: -50°C- Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K- Constant dielectric at 100 Hz: 4.7 (± 0.1)- Cross resistance: 5 x 10 to the power 14 Ohm x cm- Loss rate at f = 100 Hz: 0.020 (± 0.003)- Range of operating temperature: -50~200°C Code Q0008 Available Price €4.79
Thermal conductive paste HP 340°C 100g The transfer of heat between the electronic components and the radiator is facilitated.It is necessary for the correct operation of any type of temperature sensors.It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features: - It has a very wide range of working temperatures: -30 °C ~ 300 °C- Maximum momentary working temperature 340 °C- Thermal conductivity> 1.5 W / mK Code Q0050 Available Price €10.99
Thermally Conductive Silicone Paste HP 7g Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Code Q0146 Available Price €2.49