Chemical Components

In this category we offer you products to ensure cleanliness of technical elements in your project, lubricants, adhesives and varnishes. Any chemical liquid you need, look for it in this category. All the products we offer come from renowned producers, mostly from Europe. We have wide range of alcohols IPA in spray as well as IPA in liquid. Our alcohols have the highest quality ensured by the leading European brand - Termopasty. Additionally, we offer a line of lubricants, vaseline and laquers. Thanks to the cooperation with European providers, we have one of the highest availabilities on Spanish market. 

Chemical Components
Showing 1-8 of 8 item(s)

Thermally Conductive Silicone Paste H 7g

Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K

Q0051

Price €1.45

Silicone Thermal Conductive Paste H 0.5g

Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:
It facilitates the transfer of heat between the electronic components and the radiator.
It's necessary for the correct operation of any type of temperature sensors.
Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.
-Density at 20°C: 2.58 G/cm3
-Points: 350°C
-Freezing point: -50°C
-Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K
-Constant dielectric at 100 Hz: 4.7 (± 0.1)
-Cross resistance: 5x10 to power 14 Ohm x cm

Q0080

Price €0.59

Thermal Paste Syringe 3.1W / mK - AG Copper

Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features:
- The thermal conductivity of ~ 3.1 W/mK
- Not suitable for aluminum radiators
- No driver
- 1,5ml content

Q0042

Price €2.95

Adhesive Thermal Paste Glue 10g CPU

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

Q0006

Price €3.95

Silicone Thermal Paste Syringe 25g

Silicone Thermal Paste Syringe 25g features:
- Density at 20°C: 2.58 G/cm3
- Flashpoints: 350°C
- Freezing point: -50°C
- Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K
- Constant dielectric at 100 Hz: 4.7 (± 0.1)
- Cross resistance: 5 x 10 to the power 14 Ohm x cm
- Loss rate at f = 100 Hz: 0.020 (± 0.003)
- Range of operating temperature: -50~200°C

Q0008

Price €4.79

Thermal conductive paste HP 340°C 100g

The transfer of heat between the electronic components and the radiator is facilitated.
It is necessary for the correct operation of any type of temperature sensors.
It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features:
- It has a very wide range of working temperatures: -30 °C ~ 300 °C
- Maximum momentary working temperature 340 °C
- Thermal conductivity> 1.5 W / mK

Q0050

Price €10.99

Thermally Conductive Silicone Paste HP 7g

Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia.

Q0146

Price €2.49

Active filters

  • Tipo: Pasta térmica

Alcohol IPA

IPA is an acronym for Isopropyl Alcohol. It is used primarily as a disinfectant as well as dissolvent. Isopropyl alcohol has highly inflammable and irritating characteristics requiring caution when in use. Our alcohols come from the renowned European producer Termopasty and contain 90% plus alcohol content. Choose the form you might need the most - whether that is alcohol in liquid, which we offer in larger volumes for potential diluting or alcohol in spray ready for use for final consumer.