Chemical Components

Necessary for the protection of printed circuits. PCB varnish of high quality for manufacturing, repair and maintenance.

Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls)

Liquid for cleaning LED boards.
The fluid quickly and effectively cleans even the most persistent dirt on the surface of the boards.
Eliminates traces of marker, scratches and discoloration resulting from long term use of the board.
Cleaning liquid for LED boards 250ml features:
- Manufacturer: AG Chemia,
Content:
- A 250ml aerosol.

- The product protects PCB plates, allows for easier welding
- The product protects the printed circuit boards against oxidation and corrosion during storage.
- This allows a faster welding and avoids the "cold welding".
- The application method allows easy distribution of the product on the plates.
- Can be used during production, repair, maintenance and service.
Flux Varnish LT-4 Plate Protector features:
- Shape: Spray
- Capacity: 100ml
- Rosin RMA
- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.
Application:
- PCB protection against oxidation,
- Applied in the production of printed circuit boards immediately after engraving,

Blue sponge to clean the tip of your soldering iron to the tin.
Blue cleaning sponge for soldering iron tip features:
- Size: 50x35mm,
- Material: sponge,
- Color: blue,
- Quantity: 1.

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features:
A protective film, transparent.
Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.
Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.
PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.
-Temperature of application: -40°C + 60°C.
-Operating temperature: -50°C + 150°C.

Blue sponge to clean the tip of your soldering iron to the tin.
Blue cleaning sponge for soldering iron tip with pre-cut circle at the center features:
- Circle diameter 17mm precut to the center of the sponge,
- Size: 55x55mm,
- Material: sponge,
- Color: blue,
- Quantity: 1.

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features:
- A protective film, transparent
- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination
- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film
- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors
- Application temperature: od -40 ° C + 60 ° C

Ultrasonic Cleaning Liquid 1 litre features:
Suitable for use in ultrasonic baths, this cleaner completely removes all traces of contamination including light oils, silicones, etc.

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:
-A protective film, transparent.
-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination
-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the
protective film
-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to be
soldier, such as welding terminals or conductors.
-Temperature of application: od -40 ° C + 60 ° C.

Cleaning of AG Printer Spray 400ml features:
- An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers

Microfiber Cleaning Cloth features:
- Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges

- The electrical products and lubricants of the bearings
- Its working temperature is up to 30 °C Technical Vaseline for Contacts and Bearings 35g features:
- Solid product
- White color
- Specific smell
- Melting point: 56 °C
- Ignition temperature: 220 °C
- Density at 20 °C: 822 kg / m3
- Maximum temperature of use: 30 °C
- Solubility in water: partial

Vaseline Technical Grease 20g features:
- Lubricates moving surfaces, bearings,
- Protects metal parts against corrosion and electrical contacts
- Protects and preserves rubber and plastic
- It can be used as mounting grease
- Eliminates squeaks
- Reduces and decreases friction

Spray Contact Cleaner 300ml features:
A preparation for removing oxides and sulfides from electric contacts and for providing protection against corrosion, ensures non-obstructed electricity flow especially in the case of oxidized or worn contacts, can be used in audio products -high and low-frequency, electronic industry and in other places where clean contacts are required. - Restores low resistance in connections
- Has cleaning properties
- Used in audio technologies
- Protection against moisture and corrosion
- Prevents stray current

Technical Petroleum Jelly with Dispenser 65ml features:
- Used for protecting electric contacts, lubricating bearings
- Max. operating temperature: 30°C

A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - Made in EU
- No to the most usual materials of electrical systems

The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work.
Universal developer for photo varnish and positive printed circuit boards PCB.

A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - manufactured in EU

Potentiometer Cleaner - Spray 60ml features:
A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them.

Aqueous PCB cleaner
Water-based PCB cleaner for removing debris from PCB mounting surfaces after welding, for cleaning welding unit frames, templates and screens.
It causes the saponification of the rosin and the dissolution of the flow residues.
Its action is accelerated by the presence of neutralizers and additives reducing the surface tension.
Does not attack metal and aluminum surfaces.
Water-Based Cleaner PCB features:
- Type of chemical preparation: aqueous stripper of PCB printed plates
- Aqueous cleaner to eliminate fluxes, dirt removal, flux residues in PCB has low impact on electronic components
- Form: Liquid
- Capacity: 1l

Type of chemical preparation: alcoholic stripper of printed PCB plates.
Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.
has low impact on electronic components.
Alcohol PCB Cleaner 1l features:
- Form: liquid
- Capacity: 1l
- Alcohol PCB cleaner
PCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.
The liquid does not affect the substrate or components of the circuit board.

Compressed Air 300ml Spray Cleaner features:
- Cleaning computers, keyboards, electronics, printers
- All types of office material
- Made in the EU - HIGH QUALITY
- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices

A bottle of 500ml ethyl alcohol in Liquid, contains 70% ethanol.

Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use.

A bottle of 5000ml ethyl alcohol in Liquid, contains 70% ethanol.

Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use.

The PCB PLUS cleaner is designed for printed circuit boards.
Dissolves waste flux, including resin.
The liquid does not attack the substrate or the structural components of the printed circuit boards.
The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.
PCB Plus Cleanser Spray 400ml features:
- Form: spray
- Capacity: 400ml
Application:
- The product does not leave deposits
- It evaporates very fast
- Eliminates waste after welding
- Perfect in any electronic service
- The product does not react with most plastics used in electronics

The PCB PLUS cleaner is designed for printed circuit boards.
Dissolves waste flux, including resin.
The liquid does not attack the substrate or the structural components of the printed circuit boards.
The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.
PCB Plus Cleanser Spray 100ml features:
- Shape: Spray
- Capacity: 100ml
Application:
- The product does not leave deposits
- It evaporates very fast
- Eliminates waste after welding
- Perfect in any electronic service
- The product does not react with most plastics used in electronics

Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides.

Self-adhesive label remover - removes labels form all kinds of packaging. Caution: the preparation may imperceptibly dissolve a colorful print under the removed label as well as dissolve some plastics - caution recommended!

Anti-Adhesive No-Fat Dry Spray Based on PTFE 100ml. Dry, no-fat, anti-adhesive agent based on pure PTFE