Resistor 1K Ohm 5% 0,25W 1/4W Resistor 1K Ohm 5% 0,25W 1/4W features:-1 unit - 1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0076 Available Price €0.09
60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g 60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g features:- 50gr. 1mm diameter welding wire. 60% tin and 40% lead.- Fusing temperature 183°C/190°C.- Alloy: Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0001 ✗ Out-of-Stock Price €3.95
Integrated Circuit Supports DIP8 Width 10.16 mm Integrated Circuit Supports DIP8 Width 10.16 mm features: - Type: DIP DIL- Total number of pins: 8- Step between pins: 2.54 mm- Material: Polybutylene terephthalate- Length: 7.62 mm- Width: 10.16 mm- Temperature min .: -25 °C- Max temperature: +85 °C- RoHS compliant Code Z0005 Available Price €0.10
Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron Replacement Soldering Long Life Tip C1-2 Ø 0.5mm for 48W Soldering Iron features: - Power: 48W- Length: 65 mm- Long duration tip- Quantity: 1 unit Code H0145 Available Regular price €1.29 -€0.30 Price €0.99
65x Cable Jumper Male Lot of 65 Male-Male jumper cables. Characteristic: -No soldering required -You can easily modify or revise the circuits -Quantity: 65 cables of different lengths and colors -Cable lengths: 120mm, 150mm, 200mm, 240mm Code K0010 Available Regular price €3.49 -€0.60 Price €2.89
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0011 Available Price €7.95
Heat Shrinkable Tube 5 Colors 3 Meters Package Heat Shrinkable Tube 5 Colors 3 Meters Package features: - Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas. - These heat shrink tubes are very flexible and of high quality. Made in EU - Different sizes of 20 cm each are delivered: * 1,6mm: black, brown, red, yellow, orange * 2,4mm: black, brown , red, yellow, blue * 3,2mm: black, brown, red, yellow, blue - Quantity: 15 units - Material: polyolefin - Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter) - Minimum shrinkage temperature: 115 ° C maximum 200 ° C Code K0047 Available Price €1.95
Kontakt PCB PLUS spray 100ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 100ml features:- Shape: Spray- Capacity: 100mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0072 Last items in stock Price €3.95
Technical Petrolatum 65ml Vaseline Technical Grease 20g features:- Lubricates moving surfaces, bearings,- Protects metal parts against corrosion and electrical contacts- Protects and preserves rubber and plastic- It can be used as mounting grease- Eliminates squeaks- Reduces and decreases friction Code Q0064 Available Price €1.39
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Last items in stock Regular price €11.29 -€1.30 Price €9.99
Technical Petrolatum with Dispenser 65ml Technical Petroleum Jelly with Dispenser 65ml features: - Used for protecting electric contacts, lubricating bearings- Max. operating temperature: 30°C Code Q0063 Available Price €3.39
Technical Petrolatum 35g - The electrical products and lubricants of the bearings- Its working temperature is up to 30 °C Technical Vaseline for Contacts and Bearings 35g features: - Solid product- White color- Specific smell- Melting point: 56 °C- Ignition temperature: 220 °C- Density at 20 °C: 822 kg / m3- Maximum temperature of use: 30 °C- Solubility in water: partial Code Q0081 Available Price €1.59
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB. Code Q0094 Available Price €2.89
Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09
PVB 60 Varnish Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 ✗ Out-of-Stock Price €3.15
Graphite Varnish 2x1.5ml Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls) Code Q0073 Available Price €3.89
PVB Varnish 16 Spray 100ml Necessary for the protection of printed circuits. PCB varnish of high quality for manufacturing, repair and maintenance. Code Q0117 Available Price €4.65
Technical Petrolatum 65ml Vaseline Technical Grease 20g features:- Lubricates moving surfaces, bearings,- Protects metal parts against corrosion and electrical contacts- Protects and preserves rubber and plastic- It can be used as mounting grease- Eliminates squeaks- Reduces and decreases friction Code Q0064 Available Price €1.39
Insulating Varnish Spray 400ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:-A protective film, transparent.-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate theprotective film-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to besoldier, such as welding terminals or conductors.-Temperature of application: od -40 ° C + 60 ° C. Code Q0014 Last items in stock Regular price €11.29 -€1.30 Price €9.99
Technical Petrolatum with Dispenser 65ml Technical Petroleum Jelly with Dispenser 65ml features: - Used for protecting electric contacts, lubricating bearings- Max. operating temperature: 30°C Code Q0063 Available Price €3.39
Technical Petrolatum 35g - The electrical products and lubricants of the bearings- Its working temperature is up to 30 °C Technical Vaseline for Contacts and Bearings 35g features: - Solid product- White color- Specific smell- Melting point: 56 °C- Ignition temperature: 220 °C- Density at 20 °C: 822 kg / m3- Maximum temperature of use: 30 °C- Solubility in water: partial Code Q0081 Available Price €1.59
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB. Code Q0094 Available Price €2.89
Transparent Insulating PCB Varnish 60 1 Liter Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. Transparent Insulating PCB Varnish 60 1 Liter features: - A protective film, transparent- Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination- It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the protective film- PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors- Application temperature: od -40 ° C + 60 ° C Code Q0046 Backorder Price €21.09
PVB 60 Varnish Transparent Insulation 50ml Necessary for the protection of printed circuits.PCB varnish of high quality for manufacturing, repair and maintenance.Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features: A protective film, transparent.Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.-Temperature of application: -40°C + 60°C.-Operating temperature: -50°C + 150°C. Code Q0033 ✗ Out-of-Stock Price €3.15
Graphite Varnish 2x1.5ml Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls) Code Q0073 Available Price €3.89
PVB Varnish 16 Spray 100ml Necessary for the protection of printed circuits. PCB varnish of high quality for manufacturing, repair and maintenance. Code Q0117 Available Price €4.65