Internet and Wireless modules

Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:
- Standard: GSM / GPRS / 3G
- Frequency range: 800 ~ 1900MHz
- Interface: SMA male
- Gain: 7dBi
- Length of the antenna: 20cm
- V.S.W.R .: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 100W
- Operating temperature: -40ºC ~ + 70ºC

Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features:

Specifications of the emitter module: - Power supply: 3V ~ 12V
- Working intensity: max = 40mA (at 12V), min = 9mA (at 3V)
- AM ASK / OOK modulation
- SAW filter
- Working frequency: 315MHz-433.92MHz
- Transmission power: 25mW (315MHz at 12V)
- Range: 20 to 200 meters (different voltages can give different results)
- Transfer speed: 4 kB / S
- Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V
- Work intensity: 5.5mA (at 5.0VDC)
- Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm

It is ultra compact and very low consumption. It works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripheral control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Transceiver Module 2.4GHz features:
- Based on chip NRF24L01 + Ultra Low Power
- Free band: 2.4GHz ISM
- Speed: 250kbps, 1Mbps, 2Mbps
- Working current - reception: 13 mA
- Transmission: 11 mA (900nA -deep sleep mode)
- Receiving sensitivity: -94dB 250kbps
- Coverage in closed spaces: 15m / 30m
- SPI interface
- Input voltage: 1.9V- 3.6V
- Input / output port voltage: 0V-3.3V / 5V
- Coverage in open areas: 100m approx.
- Clock frequency: 16MHz

Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:
- The cable is used for system transmissions
2.4 [GHz] (WiFi, LTE, 3G, GPS)
- It is also suitable for the lower frequencies (CB, GSM, PMR)
- It has less loss than the type RG-58 cable
- Type of coaxial cable
- H155 cable series
- 50Ω wave impedance
- Stranded core structure
- Core type Cu
- Structure of the laminated Al-PET shield, tinned copper braid
- PVC external insulation material
- Gray insulation color
- Outer cable dimensions Ø5.4mm
- Operating temperature -15 ... 70 ° C
- Resistance to weather conditions
- Installation of 2.4 GHz antenna cable, outdoor
- Attenuations [dB / 100m]:
* 50 [MHz] - 6.5
* 100 [MHz] - 9.3

Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features:
- Standard: GPS 1575.42 MHz
- Voltage: 3 ~ 5V
- Current: max 10mA
- Interface: SMA male
- Polarization: circular (right)
- LNA gain (without cable): 28dB typ
- Noise figure: 1.5dB typ
- Operating temperature: -40'C ~ + 85'C
- Cable length 150cm
- Dimensions: 49 x38 x16 mm

- This module includes PA preamplifier and LNA (Low-noise amplifier)
- Comes with the SMA antenna for 2.4GHz (2dB)
- Outdoor - transmission up to 250kbps and a distance of up to 1 kilometer
- Works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripherals control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA features:
* Based on chip NRF24L01 +
* Free band: 2.4GHz ISM
* Speed: 250kbps, 1Mbps, 2Mbps
* Work current
- Reception: 45 mA
- Transmission: 115 mA (4.2uA -sleep mode)
* Receiving sensitivity:
-104dB 250kbps
- 95dB 1Mbps
- 92dB 2Mbps
* SPI interface

NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz features:
- The NRF24L01 + module is powered with 3.3V
- This adapter module includes a 3.3V voltage regulator
- You can connect the NRF24L01 module on it at 5V voltage
- Dimensions of PCB: 25x 18mm
- Quantity: Adapter 1 unit

Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features:
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2400 ~ 2500MHz
- Interface: SMA
- Gain: 3dBi
- Length of the antenna: 10cm
- V.S.W.R.: <1.5
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface features:
- Operating voltage: 5V
- Wait time of the module receives the data: more than 2S
- The waiting time of the module sends data: more than 300
- Transfer speed: 50 Byte / S (theoretical value)
- I2C / TWI address: 0 x 47 (decimal 35)
- Address NRF24L01: 0 x 34, 0 x 43, 0 x 10, 0 x 10, 0 x 01 (from lowest to highest)
- Size: 44 x 23 mm

Can be connected with the ESP8266 module with IPEX
Compatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA female connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1,13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40ºC ~ + 70ºC

NRF24L01 Adapter + Wireless Transceiver 2.4GHz Socket Arduino features:
- The NRF24L01 + module is powered with 3.3V
- This adapter module includes a 3.3V voltage regulator
- You can connect the NRF24L01 module on it at 5V voltage
- Dimensions of PCB: 25x 18mm
- Quantity: Adapter 1 unit

Can be connected with the ESP8266 module with Ipex
Compatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA male connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1.13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

Transceiver 1km SI4432 433MHz Wireless Transmitter Telemetry features:
- Transceiver based on the SI4432 Silicon Labs chip
- Ultrathin ultra small (16.5 × 17 mm)
- Good harmonics: easy for FCC / CE certification
- Penetration capacity (measured through 8 floors)
- Frequency range: 433.92MHz
- Sensitivity down to -121 dBm
- Maximum output power: 20dBm
- Data transfer rate: 0.123-256 kbps
- FSK, GFSK and OOK modulation
- Power supply: 1.8-3.6 V
- Ultra low power shutdown mode
- Digital indication of received signal strength (RSSI)
- Time to wake up
- Bidirectional antenna switch control and automatic adjustment
- Configurable packet structure
- Preamble detection

Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features:
- Works with ESP8266 Zigbee Arduino
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2100 ~ 2600MHz
- Interface: IPEX
- Gain: 4dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <2
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C

Transceiver based on the SI4432 Silicon Labs chip
Industry standard model
Capacitive components manufactured by Murata with 10ppm high precision glass
Outdoors - a distance of up to 1.5 km 1.5km radius SI4432 433MHz RF Telemetry features:
- Supply voltage: 1.8 ~ 3.6VDC
(Note: a voltage higher than 3.6 V will cause permanent damage to the module)
- Communication level: 0.7VDC ~ 3.6V (VCC refers to the module supply voltage)
- Working frequency: 425M ~ 525MHz (via software setting, the module uses 30M glass)
- Measured distance: 1500m (clear and open, maximum power, height 1.5m, air speed 1k)
- Transmission power: up to 20dBm (about 100mW)
- Air rate: 0.123k ~ 256Kbps (software adjustable, low airspeed recommended)

Antenna GSM GPRS 3G IPEX features:
- PCB Antenna 2dBi Ipex U.fl 50 Ohm
- Standard: 2G 3G IPEX Antenna
- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz
- Interface: IPEX
- Gain: 2dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <3.0 @ 780 ~ 960 MHz &
  <= 3.5 @ 1710 ~ 2170 MHz
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C

A waterproof pentaband antenna X000016  for all your wireless projects with Arduino and development boards

A compact, low-power Bottom Effect System Transceiver.
Transceiver based on the SI4463 Silicon Labs chip.
Industry standard model.
In full power operating conditions, open the communication distance up to 2000 km.
Much more than the SI4432.
Si4463 is a high performance 433 MHz transceiver. and low current consumption of the EZRadioPRO series, which includes a complete transmitter and receiver.
Higher sensitivity -126dBm.
The maximum output power of + 20dBm, support (G) FSK, 4 (G) FSK, (G) MSK, OOK and ASK modulation.
The data rate in the range of 100bps ~ 1Mbps.
Operating voltage of 1.8V ~ 3.6V.
FCC approval / IC. 2km radius SI4463 433MHz RF Arduino Telemetry features:
- Supply voltage: 1.8 ~ 3.6VDC

This external wireless antenna module CC1101 is suitable for Funduino and Arduino projects.
The CC1101 module of 1.2K baud consists of a domestic R & Lotes unit to improve the effective communication distance.
This is a significant improvement over the CC1100 module.
It allows to adjust the speed of the bits for different uses, thus allowing a higher transmission speed.
Supports 2-FSK, GFSK and msk modulations. It also has a high sensitivity (1.2kbps @>

The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface.

APC220 433 MHz long range wireless modules with USB programming interface. The set provides wireless communication with a range of up to 1000 metres. Easy to configure solution for remote control of e.g. a robot.