LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD features:- LCD screen TFT 240x320 pixels- Power 2.8-3.3V- 262,000 possible colors (18 bit)- 8/16 bit parallel bus digital interface- LCD Controller: ILI9325- Touch screen controller: XPT2046- Touchscreen, resistive touch screen- Manual use or with any type of pointer- SD card reader- Connector: 2 x 20 pins 2.54mm- Dimensions PCB 75x55 mm- Dimensions LCD 59x42 mm- Ideal for projects with ARDUINO Uno Mega, AVR, STM Code P0005 Last items in stock Price €9.99
Screen OLED 0.96" 128x64 White SPI I2C 7 Pin Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption: 0.08W - Operating temperature: -20 to 70 ºC - PCB board dimension: 27 x 27mm - Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. - OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc. Code P0026 Available Regular price €5.00 -€1.50 Price €3.50
2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 Available Regular price €11.95 -€2.40 Price €9.55
Screen OLED 1.3" B Blue 128x64 SPI/I2C Screen OLED 1.3" B Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel display - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves screen black and energy efficiency - very low power consumption. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0022 Available Price €8.49
TFT LCD Expansion Board Adapter 34pins V3.0 3.2" 4.3" 5.0" Shield Mega 2560 TFT LCD 34pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen. Code P0006 Available Price €7.90
Screen OLED 1.3" A Blue 128x64 SPI/I2C Screen OLED 1.3" A Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel screen - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption Code P0023 ✗ Out-of-Stock Price €8.49
LCD TFT Shield Adapter 2.4" Touch 3V Expansion Board R3 LCD TFT Shield Adapter 2.4" Touch 3V Expansion Board R3 features:- Shield LCD TFT 2.4 "Touch 3V expansion board for Uno R3- Facilitates connections between the TFT LCD 2.4 "Touch 3V with SD card reader and the Arduino UNO board- Put the screen on the shield and you can connect it directly to the Arduino UNO- UNO R3 2.4 "TFT LCD shield TFT LCD PCB Adapter for Arduino UNO STM32- The TFT01 LCD screen operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top- The TFT LCD PCB adapter for UNO is compatible with the Arduino pins, the user can plug directly the TFT LCD PCB adapter into the shield and placed on the Arduino board. - Can be used with a UNO and LCD screen Code P0004 Available Price €6.90
Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "Display of 128 * 64 pixels - one yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption energy. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0024 ✗ Out-of-Stock Price €7.79
Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "128 * 64 pixel display - One yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption of energy. Code P0025 Available Price €7.79
1.44 inch TFT LCD screen 128x128 SPI 1.44 inch TFT LCD screen 128x128 SPI features: - TFT LCD screen 128x128 pixels - 4-wire SPI interface (A0, SDA, SCK, CS) - Size: 1.44 inches - Interface: SPI - Resolution: 128 * 128 - Visual area: 1: 1 square - Color screen TFT, the effect is much better than other small CSTN displays - Disk drive: ST7735 - Fully compatible and alternative 5110 interface - Onboard LDO, 5V / 3.3 input voltage support V - Screen dimensions: 30 x 28 mm - PCB dimensions: 45 x 32 mm Code P0048 Available Price €6.99
LCD TFT Touch Screen Display 3.2 inch 320x240 LCD TFT Touch Screen Display 3.2inch 320x240, shield 34 pins. Code P0107 Available Regular price €17.90 -€1.41 Price €16.49
Screen OLED 0.96" 128x64 Blue I2C It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features: - Interface: I2C (logical level 3.3V) - Resolution: 128 x 64 - Angle of view: & gt; 160 degree - Screen color: blue - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70 - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " Code P0096 Last items in stock Regular price €7.50 -€1.51 Price €5.99
Pantalla LCD TFT 2.4 pulgadas 240x320 SPI - Pantalla LCD TFT 240x320 pixels- 262.000 posibles colores (18 bit)- Pixel: RGB vertical stripe- Controlador ILI9341 - Interface SPI - 8 bit interfaz digital, 4 bit líneas de control- Pantalla táctil resistiva 4 - wires- Ideal para proyectos con ARDUINO, Uno R3, MEGA2560 Enlaces útiles : Cableado de la pantalla LCD TFT 2.4 SPI - Conectar la pantalla LCD TFT 2.4 SPI con el módulo UNO Visualizar gráficos y textos en la pantalla LCD TFT 2.4 SPI Programar una calculadora táctil en la pantalla LCD TFT 2.4 SPI Code P0110 Available Regular price €9.60 -€1.00 Price €8.60
0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display 0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degrees - Screen color: blue and yellow (1/4 above yellow and 3/4 below blue) - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer, instruments, DIY projects, etc ... - It is an OLED screen module with blue-yellow display and with a resolution dot matrix 128x64 and an IC2 interface. - The display includes the driver controller SSD1306 128 x 64 Segment Driver / OLED / PLED Common. Code P0134 Available Regular price €7.50 -€1.00 Price €6.50
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 ✗ Out-of-Stock Regular price €6.50 -€2.51 Price €3.99
LCD TFT Display Module 128x160 1.8 SPI 1.8 TFT LCD screen with SPI interface and 5 control signals. Its touch screen is resistive, it has a resolution of 128x160 pixels.Easily programmable with UNO module, Arduino, Raspberry, Mega2560.LCD TFT Display Module 128x160 1.8 SPI features:- TFT LCD screen 1.8 128x160 pixels- Pixel: RGB vertical stripe- Driver ILI9163,- SPI interface: CS / MOSI / MISO / SCK (pins not soldered)- 5-pin interface CS, RS, SCL, SDA, RST for control- Resistive touch screen- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Code P0135 Available Price €8.95
Display OLED 0.96" 128x64 White with ZIF FPC connector Display OLED 0.96" 128x64 White with ZIF FPC connector features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3.3V - Angle of view: 160 degrees - Interface 3-wire SPI, 4-wire SPI, I2C, parallel - Low consumption: 0.08W - Use temperature: -30 to 85 ºC - 30-pin connector - Display Mode: passive matrix - Display Color: monochrome (white) - Panel size: 26.70 * 19.26 * 1.4mm - Active area: 21,744 * 10,864mm - Pitch size: 0.17 * 0.17mm - Pixel size: 0.154 * 0.154mm - Supports many control chip: 51 Series, MSP430 Series, STM32 /> Code P0153 Backorder Price €4.85
TFT LCD Expansion Board Adapter V2.2 40pins 3.2" 4.3" 5.0" Shield Mega2560 TFT LCD 40pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen. Code P0158 Available Price €7.90
LCD TFT Touch Screen Display 3.2 inch 320x240 LCD TFT Touch Screen Display 3.2 inch 320x240. Shied 40pins. Code P0165 Available Price €16.90
LCD TFT Display Module 128x160 1.8 SPI 1.8 TFT LCD screen with SPI interface and 4 control signals.. It has a resolution of 128x160 pixels. Easily programmable with UNO module, Arduino, Raspberry, Mega2560. Code P0208 Available Regular price €8.95 -€3.00 Price €5.95