WT32-SC01 development board with Esp32 from Espressif. 3.5 inch 480 x 320 TFT LCD touch screen, 4MB SPI Flash and 8MB PSRAM.

The reliable Super Glue, is ideal for repairing ceramics, plastics, leather and model making work. It permanently and strongly adheres a variety of materials such as metal, wood, paper, rubber, glass, porcelain, ceramics, plastic and plastic. The colourless adhesive cures at room temperature, taking effect in just a few seconds. Indispensable for the home or small workshop.

Super capacious 9V battery made in Li-ion technology, direct charging possible via USB-C port!

tested capacity - real capacity - min. 500 mAh, battery precharged to max. 30%.

The Circuit Scribe conductive ink pen, with its simple design, is perfect for this, allowing you to draw circuits instead of soldering or connecting them to a test board.  

The 12V gel battery with the capacity of 5Ahs. Manufactured using AGM (Absorbent Glass Mat) technology. It maintains the capacity after 3 months of storage at 91%. Long life, both in cyclic and buffer operation. No delamination effect of the gelled electrolyte. Tolerates high operating temperatures well. Completely recovers to its original capacity after a deep discharge.

This cable is designed to facilitate the extension of the sensor cable, being perfect for applications that require greater distances. They can be joined together to extend your sensors up to a maximum length of 60 metres.

LITHIUM POLYMER BATTERY Battery LIPO 4800mAh 3.7V

Programmable LED module with flexible display, 256-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED.

Programmable LED module with flexible display, 256-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED.

Programmable LED module with flexible display, 64-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED.

Prototype PCB shield board with screw terminal block for Arduino. A very convenient solution for first experiments with Arduino Mega board. To assemble your projects in a comfortable and tidy way, access to all Arduino Mega2560 pins, universal board area, 5V and Gnd buses, reset button. Shield is supplied assembled.

Useful adapter for 30-pin esp32 modules (2x15 pins). Provides easy and secure connections. You can use the terminal block sockets or create connections via female pin header.

The high-precision 5V2A charger for Li-Ion 18650 batteries has a USB-C connection for powering the module. It is also equipped with a USB-A connection for charging.

Pressure sensor sometimes called strain gauge. Load cell for measuring weights up to 50kg. The transducer measures the strain of the metal structure and converts it into a few mV.

Integrated Circuit Supports DIP14 Width 10.16 mm features:
- Type: DIP DIL
- Total number of pins: 14
- Step between pins: 2.54 mm
- Material: Polybutylene terephthalate
- Length: 17.78 mm
- Width: 10.16 mm
- Temperature min .: -25 °C
- Max temperature: +85 °C
- RoHS compliant

LITHIUM POLYMER BATTERY Battery LIPO 3350mAh 3.7V

The Sonoff MINI R4 Extreme Smart Switch (the smallest WiFi switch) is a universal WiFi controlled switch built with the ESP32 chip. It works with a voltage of 230V and allows you to control any device from anywhere in the world, controlling it via your mobile phone or voice assistants such as Alexa or Google Home. Thanks to its small size - it's 40 per cent smaller than the Sonoff miniR2 - it fits most power supplies, including the smallest European standards.

Elegant WIFI controlled touch wall light switch with 2 switches. SONOFF TX offers you perfect intelligence control solutions for your home or workplace. Compatible with Amazon Alexa, Google Assistant DIY Smart Home, Nest via iPhone or Android.

Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun.

The Konnwei KW510 is an advanced multi-function device that uses state-of-the-art technology to allow you to easily, quickly and accurately measure the actual cold start capability, battery condition and common faults in the vehicle's starting and charging systems. The KW510 is particularly useful for workshops as it can accurately detect the problem, allowing the vehicle to be repaired quickly.

Konnwei's KW870 car battery tester is capable of effectively analysing and reading important car data such as voltage, internal resistance, cold start current and AH capacity. In addition, the device calculates cold-start capacity and the degree of ageing, allowing for faster and more accurate repairs. Whether you're a beginner or an expert, this car battery diagnostic device can be used with a wide range of 6-18 V batteries with a capacity of 100-2000 CCA, including traditional, flat AGM, spiral AGM and gel batteries.

DC to DC Step-up converter 1.5-4.2V to 5V. Operates with a maximum output current of 500mA.

Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun.

Creality UW-02 machine designed for the final processing of 3D prints made with resin. It allows large 3D models with a maximum size of 240 x 160 x 200 mm to be washed and dried. The UW-02 cures prints using UV light with wavelengths of 385 nm and 405 nm, using a turntable. The washing machine is characterised by its ease of use.

Creality's Halot-Mage resin 3D printer has a 10.3-inch LCD screen, giving it an extremely large working area of 228 x 128 x 230 mm. The Halot-Mage has a high resolution of 8K, resulting in prints of the highest precision.